sailboat 2 masts

What Is A Boat With 2 Masts Called?

Last Updated by

Daniel Wade

June 15, 2022

Two-mast sailboats hold special places in many sailors’ hearts. In addition to being dignified and majestic, a two-mast sailboat offers a perfect balance that can be easily achieved by adjusting the masts in many different ways. Let’s look at the different types of two-mast sailboats.

Whether you’re a sailboat fanatic or an interested observer, there’s something special about two-mast sailboats. In most cases, the first thing you’ll notice about a sailboat is the two masts. Generally, the mainmast is often taller than the aft-mast, which is often referred to as the mizzenmast. The mizzenmast is like a trusted old friend. It not only helps in stabilizing the sailboat under power but can also act as a bow thruster in certain scenarios. There are many reasons why sailors sing a lot of praises as far as two-mast sailboats are concerned. In heavier winds, you can break down the main mast and use the mizzen mast to give you a more balanced and comfortable sail even in the worst of conditions. But what is a boat with 2 masts called?

There are several sailboats with two masts. The most common ones include yawl, ketch, schooner, and brig. In most cases, the designs of the masts do vary but the main idea remains the same. They can have the extra mast either behind or in front of the mainmast. If the additional mast is in front of the mainmast, it’s known as a foremast but if the additional mast is behind (aft of) the mainmast, it’s known as a mizzenmast.

Let’s take a brief look at these two-mast sailboats.

Table of contents

A yawl is one of the most common types of two-mast sailboats. It has two masts: a mizzenmast and the mainmast. The mizzenmast is usually much shorter than the mainmast. This makes it an oblique type of a sailboat in the sense that the mainmast is located in the front of the boat while the mizzenmast is located in the rear past or the boat.

The mizzenmast of a yawl is mainly used to increase the helm balance and is located aft of or behind the rudder.

It’s always easy to confuse a yawl with a ketch so it would only make sense to clear up before going any further. They both have two masts with the mainmast at the front while the mizzenmast is smaller. The difference between a ketch and a yawl comes down to the location of the mast. In a yawl, the mizzenmast is behind the rudder post while in a ketch, the mizzenmast if in front of the rudder post.

Again, the mizzenmast of a ketch is nearly as tall as the mainmast and is used to carry a mainsail. Its main function, however, is to drive the sailboat forward and can sufficiently sail the boat, especially in heavier winds. This is very different from the mizzenmast of a yawl, which is only used to increase the helm balance and cannot drive the boat forward. This means that the mizzenmast of a ketch is bigger than the mizzenmast of a yawl. In short, the mizzenmast on a ketch is technically a driving sail while the mizzenmast on a yawl is more of a balancing sail.

A ketch generally has an advantage over a sloop in downwind or in heavy winds. This is because it has a variety of setups than a typical sloop. The mizzenmast gives you a lot of options to depower in heavy winds and find the most perfect amount of canvas to fly. It can also help in stabilizing the sailboat under the power given that the mizzenmast is naturally in an excellent position.

In essence, a ketch has many practical benefits that can be ideal in most situations in the waters. In addition to sailing peacefully on a beam-reach, a ketch is easily manageable and can give you a lot of options in various weather conditions and situations.

When it comes to a two-mast schooner (a schooner can have two or more masts), the foremast is usually smaller than the aft most mast, which is essentially the mainmast. As such, the main characteristic of a schooner is that the masts are almost of the same height but the foremost mast is slightly smaller.

Even though a schooner is easier to sail than say a sloop (one-mast sailboat), it isn’t very fast. This is why most sailors prefer a sloop to a schooner but it’s a sight to behold, especially when under full sail. While a schooner with a square topsail is the most common, there are others with sprit rigs that run diagonally. Schooners with spritsails are not ideal in big seaways because the sprit rig cannot be lowered since it could become unmanageable. On the other hand, the sprit rig is ideal in coastal waters given that the topsail can catch a high up breeze. 

Like the above-mentioned two-mast sailboats, the brig has two masts with the foremost mast squared. The mainmast can be squared, partially squared or triangular. Some brig sailboats have a lateen mainsail on the mainmast. Historically, brigs were used by pirates and were set in motion using oars. Its name is derived from the Italian word “brigantine,” which loosely translates to “pirate.” These types of sailboats were used by pirates the Mediterranean in the 16th century before they became sailboats.

The two most common types of brigs are:

Brigantine – The foremost mast is usually partially squared but the mainmast is triangular.

Hermaphrodite brig – It’s also known as the schooner brig or the half brig. The two masts are partially squared but the mainmast is gaff-rigged and topsail, which technically makes it half schooner.

When it comes to speed and maneuverability, brigs are easy to handle and maneuver and perhaps that’s why they were preferred by pirates. Again, brigs are generally larger than other two-mast sailboats or single-mast sailboats.

There you have it; there are various types of two-mast sailboats, so there’s not a single name that fits all. You can choose any of them as they’ll serve you perfectly, especially in heavy wind conditions.

Bon Voyage!

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Learn About Sailboats

Sailboat Parts

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboat Ornaments

September 12, 2023

Discover the Magic of Hydrofoil Sailboats

December 11, 2023

Popular Posts

Best Liveaboard Catamaran Sailboats

December 28, 2023

Can a Novice Sail Around the World?

Elizabeth O'Malley

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

7 Popular Sailboats with Two Masts (With Pictures & Prices)

Sailboats can come with one, two, or even more masts. You can also have different-sized masts placed on the front, back, or middle of your vessel.

Below, I have listed popular sailboats that have two masts.

Let’s get started!

Table of Contents

Check also: Average sailboat price examples .

Things to Know About Sailboats With Two Masts

When looking for sailboats with two masts, you should know what you are looking for. A Ketch is one type of sailboat with two masts.

Knowing this term can help you to nail down your search when looking for a boat with two masts.

These boats come in many shapes and sizes as well as many different types of designs. Generally, these types of boats have the taller mast being forward and the smaller mast near the aft.

Yawls are also boats that feature two masts.

These also come in multiple types and designs. The difference between the Ketch and the Yawl is that the Yawl has the larger mast in the aft instead of forward. They also have smaller sails and can be easier to handle.

Another type of sailing ship that features two masts is a Brigantine.

This ship has mixed sailing rigs which commonly features squared sails on the front part of the ship and triangular sails on the back of the ship.

These boats are often larger and require more people to handle them.

7 Great Used Boats with Two Masts

There are many benefits to used boats including a lower cost. You can get a larger boat for a lower cost if you choose to buy used.

When looking at used boats, you need to make sure you look at the boat and its features thoroughly to make sure everything is in great working order.

If you do not feel confident that you can properly look over a used vessel, you can even hire a marine inspector to look it over and let you know of any potential issues or needed repairs. You can use this assessment to decide what is worth it, or if the needed repairs fall into the budget.

It is much more common for a used boat to have more than one mast. This is because the newer sailboat models are creating their new designs with just one mast.

One mast ships are easier to handle and manage so new designs are trying to optimize design and ease of sailing.

Below are great used sailboats with two masts which I have arranged by price .

1. 1976 Westerly Center Cockpit Ketch

This 1976 Westerly Center Cockpit Ketch is a small 36-foot long sailboat with two masts. This is a solidly built cruising vessel that features a center cockpit ketch layout.

This boat has a small 38 horsepower engine perfectly fit to navigate its smaller size.

The interior features 1 single berth and 3 double berths all in 3 cabins. This boat also has 2 full heads onboard.

You also have a full galley with a 4 burner stove, refrigerator and freezer, stainless steel sink, and microwave oven.

This boat makes great use of limited space and offers many amenities in a much smaller frame.

Price: $37,000.00

2. 1978 Jeanneau Gin Fizz

The 1978 Jeanneau Gin Fizz is a trusted and popular two-masted design capable of crossing the Atlantic Ocean .

This boat is also very spacious for a boat that is only 38 feet in length. This model also won an award for “security, comfort, ease of handling, and ability to handle varying conditions.”

This particular used model has been well maintained and upgraded over the years.

This boat is great for family cruising, offshore passages, and even racing.

This boat features a 50 horsepower engine to help navigation.

Inside you can find 2 cabins and 1 head. You will be highly comfortable with air conditioning and other interior luxuries.

Price: $46,000.00

3. 1979 Freedom 40

The Freedom 40 is a classically designed centerboard ketch with two masts. This boat is a great sailor loaded for cruising on the wide-open blue water.

This sailboat is 40 feet in length and features accommodations for six people that include a double-v berth, another double berth, and two single berths.

There is also a full head that can be accessed both from the main salon and aft cabin.

This boat was recently painted and features newer interior fabrics, forced air heating, and much more.

You can find a dinette with separate freezer and refrigeration compartments, a stove with an oven and broiler, a double stainless steel sink, plenty of storage, and other interior features.

This boat also comes with an outboard motor with 50 horsepower and a hard bottom inflatable dinghy.

Price: $54,900.00

4. 1977 Puma 38 Ketch

The Puma 38 Ketch is a two-masted sailboat built for racing like the rest of the Puma sailing line. This brand prides itself on speed and maneuverability.

The 1977 Puma 38 is 34 feet in length with a backup diesel engine that can help you get where you need to go as well as docking into a slip. This motor features more horsepower than the average sailboat with 45 horsepower.

Features on this vessel include autopilot, electrical and manual bilge pumps, a full marine head, running hot water, and refrigerator.

This boat is made of fiberglass with teak finishes and looks well kept. You can find this boat in Spain if you are interested in purchasing it.

Price: $66,099.00

5. 1973 Morgan Out Island 41

Originally designed by Charley Morgan, the Morgan Out Island 41 is a center cockpit shoal-draft cruiser that features two masts.

This larger boat is 41 feet 3 inches in length and features many amenities.

This boat is the tri-cabin version and features interior heating, pressurized hot and cold water, a 2 burner gas oven, and a fridge.

This boat also seats up to 7 in the 3 cabins and the saloon. There are also 2 full heads on this vessel.

This boat is even equipped with an inboard motor . Inboard motors are easier when it comes to navigation including backing up, which is generally hard for sailboats to do.

Price: $68,596.00

6. 1970 Hinckley Bermuda 40

This 1970 Hinckley Bermuda 40 is a gorgeous two-masted boat painted with a mixture of desert sand and oyster white on the exterior and features a beautiful and well-kept deck.

This boat has previously had all her systems replaced and upgraded and features a 40 horsepower engine that was new in 2014.

This boat features a mahogany interior and sleeps up to 6 people in 2 cabins. You can also find a 3 burner propane stove with oven, fridge and compressor, new countertops and plenty of storage.

This boat is a stunning and highly upgraded “must-see” at a very reasonable price.

Price: $129,500.00

7. 1995 Amel Super Maramu

A newer model of sailboat is the 1995 Amel Super Maramu sailboat. This sailboat has two masts and is very long at 53 feet.

This boat features an aft deck, steps molded right into the hull, well-protected cockpit an many other features. This boat has a large 76 horsepower engine which is more than the average sailboat is equipped with.

Inside, this boat features 2 cabins and 2 heads with showers. There is also plenty of storage, air conditioning , and electric heaters. There is also a nice salon and galley with a refrigerator, dishwasher, chest freezer, microwave oven, 3 burner stove, and other appliances.

This boat is great for multiple days out on the water and is new and updated. Because of the year, this was manufactured and the features, this boat has a larger price tag than the previous models.

Price: $299,990.00

Final Thoughts:

Sailboats are a great way to enjoy a day out at sea. Most sailboat models come with sleeping arrangements and even a kitchen. This makes them ideal for trips that will take more than a day.

Having multiple masts allows you to harness the power of the wind better and can increase your speed and directional capabilities.

There are many great choices when it comes to boats with two masts, but newer models are starting to steer away from double mast designs. This does not mean that you cannot get a good boat with two masts.

Used boats can be great choices when it comes to purchasing a boat. This is even more true with large, yacht boats such as the ones listed above.

Just make sure when you buy a used sailboat you check that everything is intact and in good working order and if it is not, you have allotted space in the budget to fix what is needed.

Your new double-masted sailboat should provide you with plenty of long-lasting memories and adventures out on the water while you connect with the wind and the sea.

Click to share...

What’s a Boat with Two Masts Called: Two masted sailing boat types

Two-masted sailing boats will always have a special place in the hearts of many sailors. Many sailors consider two-masted sailing boats to be the most attractive and graceful of all sailing vessels. They have an obvious elegance, but what do you know about these two masted sailboats? Let’s find out!

Among the most important aspects are the fact that two-masted sailing boats offer greater sail balance, engineless sailing and more heavy weather options.

Even if the two masted sailboats are not so common, the sailing world has a few of them and what is more, they represent a proof of the evolution and improvement of sailing boats over time. There are an almost endless number of ways sailors have arranged their sails on boats over the years.

Two-masted sailing boats are classified according to the size and position of their masts.

There are different two-masted sailing boat types and two of the most popular are schooners and yawls.

The origins of schooner-rigged vessels are unknown, however there is evidence of them in paintings by Dutch maritime painters dating back to the early 17th century.

Schooners were developed by Northern European countries, while yawls are believed to be descended from the fishing boats of England.

Sailboats with two masts include yawls, ketches, schooners and brigs (known as brigantines). Yawls and ketches are both types of sloops, which means they have one mast, but the difference between them is that the yawl has a second mast stepped at the bow.

Ketches and Yawls have a lower mast, unlike schooners that have a taller aft mast, which is also known as mizzen. Ketch sailing boats have something specific: the aft mast is  located in front of the rudder post.

The yawl’s mizzenmast serves as a counterbalance for the jib sails, so that it doesn’t have to be hung from the forestay (the rope running from the top of the mast down to the deck). They’re usually smaller than ketches and have less rigging because they don’t carry as many sails as a sloop with two masts.

Yawls are faster sailboats than schooners because they’re lighter, more balanced and easier to sail upwind. They can also go faster because their shorter sails catch more wind. But schooners have larger payloads, which means more people or cargo — an important consideration for long trips without resupply.

Schooners are two-masted sailing boats, but instead of having a jib sail like yawls, ketches and most sloops, schooners have a fore-and-aft spanker sail like a gaff sailboat. These two-masted sailboats have at least two masts, the foremast being slightly shorter than the main mast.

Schooners are larger than yawls, ketches and other sloops and weren’t used very much in modern times because they were more difficult to handle. They’re still used in racing competitions today.

Schooners have a longer bow portion than yawls. The mainsail is aft of the mast, and either one or two foresails are in front of it. In a schooner, these are triangular sails; in a yawl, they’re trapezoidal. Yawls have bowsprits — poles that extend beyond the bow for the jib and stay sail to be attached. Schooners have small bowsprits that can support jibs but not large sails.

The term ketch derives from the word catch, which hints to how it got its name in the 17th century. Ketches were initially intended to meet the specific requirements of offshore net fishing.

Ketch is a type of sailboat that features two masts and two sails, commonly used as a racing and cruising boat. The mainmast of this two-masted sailboat is typically taller than the mizzen mast (aft-mast). Its name derives from catch.

Taller masts allow you to use larger sails, so ketch boats are able to achieve better speeds than similar boats with only one mast. Some ketch designs feature a gaff rig, which is similar to a yawl, while others feature a yawl rig, which looks like a traditional sloop.

Ketch boats may look easy to sail but the slightest mistake can lead to disaster. You must be careful when operating this type of boat because it does not have as much stability as other boats, especially when you’re manoeuvring in tight quarters or windy conditions.

A ketch may also be a small recreational boat with only one head-sail in use. Many modern designs have moved away from sail altogether and are powered by engine, while others use both sails as well as engines depending on circumstance.

The brigantine was once a tiny ship that carried both oars and sails. It was a favorite of Mediterranean pirates.

A brigantine is a square-rigged sailing boat with two masts, with a fully square-rigged foremast and two sails on the mainmast.

The mainmast is stepped forward of the deck, making it possible to sail into the wind using a triangular headsail known as a jib. The brig’s foremast is shorter than the mainmast.

The name of this type of boat with 2 masts is derived from the Italian word “brigantino”, which means brigand.

Also, this two-masted sailing boat type was most commonly used for coastal trade and pirate hunting. The brigantine had an advantage over other ships of the time because it could sail against the wind using both sails, making it easier to travel against strong winds.

Faster and easier to manoeuvre than a sloop or schooner, it was used for piracy and espionage.

FAQ: Two-Masted Sailboats

What do you call a two-masted sailboat.

Two-masted sailboats are of several types: yawls, schooners, ketches or brigantines.

Why do some sailboats have two masts?

The vast majority of sailboats feature a mainsail and a jib. These two-masted sailboats provide several advantages in terms of speed and maneuverability. These two masts may be configured in a variety of ways.

The foresail directs air beyond the back of the mainsail, generating greater power from the wind. In order to help menouvering, the foresail can be backed. So, adding sails makes things simpler for bigger boats, making them easier to handle in heavy winds.

What is the difference between a ketch and a yawl sailboat?

Because they are lighter, more balanced, and easier to sail upwind, yawls are faster sailboats than schooners. They can also go at a faster speed since their shorter sails collect more wind. Schooners, on the other hand, have higher cargoes, which means more people or freight – a crucial consideration for extended journeys without replenishing.

What is a one masted sailboat?

It's a sailing boat having a single mast roughly one-third the length's aft of the bow. A sailboat with a single mast usually has one headsail in front of the mast and one mainsail behind the mast.

What is a two-masted square rigger?

It's a brig with two square-rigged masts. A gaff-rigged fore-and-aft sail also called a "mizzen" is used in addition to jibs and staysails (stays'ls) before the foremast and staysails between the masts.

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

What Is A Boat With 2 Masts Called?

Sailboats have held and air of mystique and romance ever since the early explores sailed the globe.

However, the early trade ships were somewhat restricted in their ability to sail into, or against, the wind. As a result, the ships that discovered the new world were slaves to the directions the trade winds were blowing.

Today, thanks to advances in hull design, sail orientation and mast placement, there are numerous sailboat designs that use multiple sail configurations that can travel around the world in any direction at any time of year.

Over the years the types of sailboats have been reduced to a few well-performing designs. These designs are divided into the two main classifications of one-masted boats and those with two or more masts with each mast being capable of supporting one or more sails.

The sloop is the most common type of sailboat and has just one mast, placed roughly at midship, with up to three headsails attached to the mast by guy lines. Boats with 2 masts or more are the ketch, yawl, brigantine, brig and the schooner , with the schooners having two, three, or in rare cases, four masts.

Many sailors like the ketch-rigged design for its off-shore performance, comfort and overall balance. This design has a main and mizzen sail, with the mainsail set in approximately the same position as on a sloop, The mizzen is a smaller mast sail set towards the rear of the boat.

The concept behind the two-sail setup on the ketch-rigged sailboat is that it provides two smaller sails that provide more overall sail area than the single sail design.

In theory the smaller sails are easier to work with in heavy off-shore winds, making the boat much easier to sail in storms. Because of the smaller and easier-to-handle sails, the design is a good choice for long distance short-handed sailing.

The mizzen sail also acts as sort of a “rudder” in helping to keep the boat sailing in the proper direction because of the downward force the mizzen applies to the rear of the boat.

Comfort is another strong selling point of this design. Whereas most sailboats are designed with the cockpit at the stern of the boat, this sailboat has a center cockpit design to allow for the placement of the mizzen sail aft.

Having the cockpit in the middle of the boat allows for more headroom below deck at the rear of the boat and a larger aft cabin. Additionally, unlike an aft cockpit that usually has the rear open to the ocean, a center cockpit is fully enclosed. This offers protection from the elements while at sea and makes for a much nicer sitting area.

The ketch-rigged sailboat is a time-proven rig that has made untold circumnavigations of the globe. For sailors who like the two-mast design, this sailboat is a hard choice to beat.

The yawl is also equipped with a main and a mizzen mast. However, a yawl typically has a smaller mizzen with the mast set aft of the rudder post.

There are as many arguments about whether the yawl is a practical off-shore design as there are species of fish in the ocean. While there are some that site the sail plan of the yawl as more aesthetic than functional, there are many long-time professional sailors who swear by the yawl design.

In theory, at least, the rear mast works as a rudder similarly to the ketch-rigged sailboat. The arguments typically start over the size and placement of the mizzen mast.

Some claim that placing the mizzen further back aids in helping to steer the boat. The other side of the argument is the reduced sail size makes it less efficient.

There is also the point that some sailors feel the mizzen being placed further back aids in heaving, or changing direction, and helps with steadying the boat at anchor.

Still, most sailors familiar with both the ketch and yawl say that the mizzen on the yawl is not a match for that of the ketch-rigged sailboat.

Brigantine and the Brig

Of similar, but not identical design, the brigantine and brig fall into the category of “clipper” or merchant ships.

Both are two-masted boats with the brigantine having square sails on the foremost mast and gaff sails on the mainmast. Here note that the smaller foremast is set forward of mast for the main sail.

Gaff sails are a four-cornered sail design attached to horizontal pole that hangs from the mast. Because of the smaller design, gaffs sails are more easily handled. In contrast, the brig uses square sails on both masts.

Both ships handle both coastal waters and ocean crossings as the square sails are well suited for sailing the trade wind routes.

A schooner is another boat with 2 masts, but can also have more. Like the brig and brigantine, a two-masted schooner has a foremast and an aft mast, the latter essentially being the mainmast.

The main characteristic of the schooner is the masts are almost the same size, with the foremost mast sometimes being slightly shorter. The schooner is equipped with gaff sails on all masts, making it better equipped to handle strong seas.

This makes the schooner very versatile and well suited to crossing the ocean on the trade-wind routes as well as sailing coastal waters with varying wind directions.

Closing Thoughts

Because of the versatile design, many pleasure sailboats during the 19th century were schooner-rigged.

While a square topsail is the most common schooner sail plan, some have sprit rigged topsails that run diagonally across the mast. However, sprit rigging is inefficient in adverse weather as the sails are not easily lowered.

Conversely, sprit rigging excels in coastal waters where the sails can more readily catch the light winds that tend to blow higher up.

While a schooner is easy to sail, can handle various wind and water conditions and is probably the most magnificent sight on the sea under full sail, the draw back of the schooner is it is definitely not the fastest sailboat design.

My Cruiser Life Magazine

Ketch Me If You Can…What’s a Two Masted Boat Called?

How a boat’s sails and masts are arranged is called its sail plan or rig. Each rig type has a name, just another reason why it’s a good idea to refer to an illustrated guide to the parts of a sailboat when first learning! 

One of the most identifiable things is the arrangement of a vessel’s masts. Two masted boats may be of modern design, or you might see 2 masted ship illustrations from history books. Let’s look at what a ship with two masts might be called and the difference between each type.

Table of Contents

Benefits of two masted sailboats, disadvantages of a split rig, is it a ketch a yawl schooner they’re more than the answer to a crossword clue they’re two masted boats, 2 mast sailboat faqs.

Two-Masted Boats with Fore-and-Aft Rigged Sails

With modern sailboat rigs, there are three types of sailboats with two masts. For those looking for a two masted boat crossword clue, here they are–ketch, yawl, and schooner. Now here’s a closer look at the difference between all three .

Before we dive into the many types of sailboat two masts designs, we should define what a boat with one mast is. Single-masted vessels are called sloops. As you might remember from our article on sailing terms, fore-and-aft sails are usually triangular and hoisted up the mast along the vessel’s centerline. Square-rigged sails have four corners and are mounted perpendicular to the mast. These days, square riggers are limited to historical museum ships. 

A ketch is a two-masted sailboat. The rear mast, called the mizzen mast, is shorter than the forward main mast. The mizzen mast is mounted forward of the rudder post. 

Ketches are an example of a split rig, meaning that the sailplan is divided among two masts. This means that the masts will be shorter and the sails smaller, appealing to some sailors since smaller sails are easier to handle. By having move sails, sailors can pick and choose just the right combination for the existing conditions. 

One example of this is sailing under “jib and jigger.” That’s sailor slang for flying only the foresail (like a working jib) and the mizzen. This reduces the boat’s sail area for heavy weather and leaves the helm well-balanced.

A yawl is similar to a ketch, but the rear mizzen mast is moved farther aft, behind the rudder post. This makes the mizzen on a yawl seem like an afterthought, almost like it’s attached to the railing. The mizzen sail on a yawl is usually smaller than on a ketch, and its rigging is all outboard of the rail. 

The mizzen mast and sail on a yawl are designed to balance the helm for better control rather than divide up the power between the masts. Still, a yawl gives the sailor more choices of sail than a standard sloop does. 

If a two mast boat has masts of equal height or the forward mast is the shorter of the two, it is a schooner. While ketches and yawls are more or less designs of two masted sloop, a schooner is a different beast altogether. The rear mast on a schooner is the mainmast, and the forward mast is the foremast.

Schooners were a design progression as ships and boats transitioned to have more fore-to-aft rigged sails and fewer square sails. The proper definition of a schooner is a ship with fore-to-aft sails rigged on two or more masts. As a result, some schooners have a square topsail on the foremast. These are often called topsail schooners.

Furthermore, schooners aren’t limited to two masted boats. Schooner can have as many masts as the design called for. Four to six-masted schooners once raced across the oceans, carrying cargo and passengers from continent to continent.

Modern rigged sailboats are occasionally found in schooner designs, but they are an oddity. 

Benefits of a Sailboat Two Masts

So why have two masts at all? Sailboat design is one of those things sailors love to banter about at the bar or on the dockside during sundowners. Which is better, a sloop or a ketch? Everyone has their own answer to that question!

It’s important to remember, of course, that one isn’t necessarily better than the other. They are simply different designs, each with its pros and cons.

• Lower loads on smaller sails make them easier to handle
• Lower sheet loads mean smaller and less expensive 
• More sail plan options for heavy winds
• Shorter overall mast height for bridge clearance
• Easy to balance steering forces
• Mizzen can be used as a riding sail at anchor
• Easy to jury rig something after a dismasting–more parts and spars to work with
• More rigging and more sails mean higher costs
• Mizzenmast takes up space in the cockpit (aft cockpit boats)
• Mizzen boom may block stern arch, solar panel installations, or dinghy davit options

2 Masted Ship Examples with Square Rigged Sails

Diving into old-time ship designs is more complicated. As mentioned above, a schooner is any vessel with fore-and-aft sails rigged on more than one mast. But boats and ships with square-rigged sails went by different names.

A brig is a double mast sailboat with both masts square rigged. In addition, it has fore-and-aft staysails and jibs and a mizzen sail on the aft mast–which is usually gaff-rigged.

A brigantine is a ship with two masts, with the foremast square-rigged and the aft mainmast fore-and-aft rigged. 

You don’t see too many two masted boats these days, which is unfortunate. They look stately and salty, ready for anything the oceans throw at them. But modern sailboat designers and many owners prefer the simplicity of a sloop. They’re generally faster, and they can be just as easy to control with new-style winches and sheets. 

Want to learn more sailing vocab? Check out our article on sailing terms you should know before setting out! And if you’ve spotted a cool boat and wonder what it might be, check out online tools like Sailboatdata.com for specifications and rig types.

What is a 2 masted boat called?

There are several names for sailboats with two masts. The most common examples are ketches, yawls, or schooners.

What is a sailboat with two or more masts?

A two masted sailboat, with the forward mast the taller of the two, is either a ketch or a yawl. If both masts are equal in height or it has more than two masts, then it is a schooner.

What is a two-masted square rigger?

A two-masted, square-rigged vessel is called a brig. If it also has fore-and-aft rigged sails, it might be a topsail schooner or a brigantine.

What is a two hulled boat?

A boat with two hulls is called a catamaran

Matt has been boating around Florida for over 25 years in everything from small powerboats to large cruising catamarans. He currently lives aboard a 38-foot Cabo Rico sailboat with his wife Lucy and adventure dog Chelsea. Together, they cruise between winters in The Bahamas and summers in the Chesapeake Bay.

Leave a comment

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Navigating the High Seas: A Comprehensive Guide to Sailboat Masts

Sailboat masts are the unsung heroes of the sailing world, silently supporting the sails and ensuring a smooth journey across the open waters. Whether you're a seasoned sailor or a novice, understanding the intricacies of sailboat masts is essential for a safe and enjoyable voyage. In this comprehensive guide, we will delve into the world of sailboat masts, discussing their types, maintenance, and everything in between.

Types of Sailboat Masts

Sailboat masts come in various configurations, each with its advantages and drawbacks. The two primary types are keel-stepped and deck-stepped masts.

Keel-Stepped Masts

Keel-stepped masts are the most common type, extending through the deck and resting on the boat's keel. They provide excellent stability and are suitable for larger sailboats. However, they require careful maintenance to prevent water intrusion into the boat's cabin.

Deck-Stepped Masts

Deck-stepped masts rest on the deck of the boat, making them easier to install and remove. They are commonly found on smaller sailboats and are more forgiving in terms of maintenance. However, they may offer slightly less stability than keel-stepped masts.

Components of a Sailboat Mast

To understand mast maintenance better, it's essential to know the various components of a sailboat mast. The key parts include the masthead, spreaders, shrouds, and halyard sheaves.

The masthead is the topmost section of the mast, where the halyards are attached to raise and lower the sails. It also often houses instruments such as wind indicators and lights.

Spreaders and Shrouds

Spreaders are horizontal supports attached to the mast to help maintain the proper angle of the shrouds (cables or rods that provide lateral support to the mast). Properly adjusted spreaders and shrouds are crucial for mast stability and sail performance.

Mast Materials: Choosing the Right One

Sailboat masts are typically constructed from three primary materials: aluminum, wood, and carbon fiber. Each material has its unique characteristics and is suited to different sailing preferences.

Aluminum Masts

Aluminum masts are lightweight, durable, and relatively easy to maintain. They are commonly used in modern sailboats due to their cost-effectiveness and longevity.

Wooden Masts

Wooden masts, while classic and beautiful, require more maintenance than other materials. They are best suited for traditional or vintage sailboats, where aesthetics outweigh convenience.

Carbon Fiber Masts

Carbon fiber masts are the pinnacle of mast technology. They are incredibly lightweight and strong, enhancing a sailboat's performance. However, they come at a premium price.

Mast Maintenance

Proper mast maintenance is essential for safety and longevity. Regular cleaning, inspection, and addressing minor issues promptly can prevent costly repairs down the line.

Cleaning and Inspection

Regularly clean your mast to remove salt, dirt, and grime. Inspect it for signs of corrosion, wear, or damage, paying close attention to the masthead, spreaders, and shrouds.

Common Repairs and Their Costs

Common mast repairs include fixing corroded areas, replacing damaged spreaders, or repairing shrouds. The cost of repairs can vary widely, depending on the extent of the damage and the materials used.

Extending the Lifespan of Your Mast

Taking steps to prevent damage is essential. Avoid over-tightening halyards, protect your mast from UV radiation, and keep an eye on corrosion-prone areas.

Read   our  top  notch   articles  on  topics  such as  sailing ,  sailing   tips  and  destinations  in  our   Magazine .  

Stepping and Unstepping a Mast

Stepping and unstepping a mast is a crucial skill for any sailboat owner. This process involves removing or installing the mast on your boat. Here's a step-by-step guide for safe mast handling.

Step-by-Step Guide for Safe Mast Handling

• Gather the necessary tools and equipment.
• Disconnect all electrical and rigging connections.
• Use a crane or mast-stepping system to safely lower or raise the mast.
• Secure the mast in its proper place.
• Reconnect all electrical and rigging connections.

When and Why to Unstep a Mast

You may need to unstep your mast for various reasons, such as transporting your sailboat or performing extensive maintenance. It's crucial to follow the manufacturer's recommendations and ensure a safe unstepping process.

Sailboat Mast Boot: Protecting Your Mast

A mast boot is a simple yet effective way to protect your mast from water intrusion and damage caused by the elements. Here's what you need to know.

The Purpose of a Mast Boot

A mast boot is a flexible material that wraps around the mast at the deck level. It prevents water from entering the cabin through the mast opening, keeping your boat dry and comfortable.

Installing and Maintaining a Mast Boot

Installing a mast boot is a straightforward DIY task. Regularly inspect and replace it if you notice any signs of wear or damage.

Replacing a Sailboat Mast

Despite your best efforts in maintenance, there may come a time when you need to replace your sailboat mast. Here's what you should consider.

Signs That Your Mast Needs Replacement

Common signs include severe corrosion, structural damage, or fatigue cracks. If your mast is beyond repair, it's essential to invest in a replacement promptly.

The Cost of Mast Replacement

The cost of mast replacement can vary significantly depending on the type of mast, materials, and additional rigging needed. It's advisable to obtain multiple quotes from reputable marine professionals.

Yacht Masts: Sailing in Style

For those looking to take their sailing experience to the next level, upgrading to a yacht mast can be a game-changer.

Differences Between Sailboat and Yacht Masts

Yacht masts are typically taller and offer enhanced sail performance. They are often equipped with advanced rigging systems and technology for a more luxurious sailing experience.

Upgrading to a Yacht Mast

Consult with a marine professional to determine if upgrading to a yacht mast is feasible for your sailboat. It can be a significant investment but can transform your sailing adventures.

Sailboat Mast Steps: Climbing to the Top

Mast steps are handy additions to your mast, allowing easier access to perform maintenance or enjoy panoramic views. Here's how to use them safely.

Using Mast Steps Safely

Always use proper safety equipment when climbing mast steps. Make sure they are securely attached to the mast and regularly inspect them for wear or damage.

The Advantages of Mast Steps

Mast steps provide convenience and accessibility, making sailboat maintenance tasks more manageable. They also offer an elevated vantage point for breathtaking views while at anchor.

Mast Maintenance Tips for Beginners

If you're new to sailboat ownership, these mast maintenance tips will help you get started on the right foot.

Essential Care for First-Time Sailboat Owners

• Establish a regular maintenance schedule.
• Seek advice from experienced sailors.
• Invest in quality cleaning and maintenance products.

Preventing Common Mistakes

Avoid common pitfalls, such as neglecting inspections or using harsh cleaning agents that can damage your mast's finish.

Sailing with a Mast in Top Condition

A well-maintained mast contributes to a safer and more enjoyable sailing experience. It enhances your boat's performance and ensures you can rely on it in various weather conditions.

How a Well-Maintained Mast Improves Performance

A properly maintained mast helps maintain sail shape, reducing drag and improving speed. It also ensures that your rigging remains strong and secure.

Safety Considerations

Never compromise on safety. Regularly inspect your mast, rigging, and all associated components to prevent accidents while at sea.

Sailboat masts are the backbone of any sailing adventure, and understanding their intricacies is crucial for a successful voyage. From choosing the right mast material to proper maintenance and upgrading options, this guide has covered it all. By following these guidelines, you can sail the high seas with confidence, knowing that your mast is in top condition.

So  what  are  you   waiting   for ?  Take  a  look   at   our   range   of  charter  boats  and  head  to  some   of   our  favourite     sailing   destinations .  

RetireFearless

What Is A Boat With 2 Masts Called?

We’re familiar with boats that have one mast. However, what about those with two? What is a boat with two masts called?

March 16, 2023

This article may contain affiliate links where we earn a commission from qualifying purchases.

Most sailors have a profound fascination for dual-mast boats. The great thing about such boats is that they offer a great level of balance. From an aesthetic viewpoint, boats with two masts appear beautiful and majestic. But what are they called?

The most common names for boats with two masts are Ketch, Yawl, Brig, and Schooner. The designs of these boats are variable, but the primary idea remains the same. An extra mast in the front is called the foremast, while an extra mast in the back is called a mizzenmast.

Usually, the aft-mast is shorter than the mainmast. The aft-mast, also known as the mizzenmast, stabilizes a sailboat while serving as a bow-thruster in some conditions. In windy conditions, the mainmast can be broken down while the mizzenmast remains intact, thus resulting in a comfortable and balanced sail.

As professional sailors, we take great pride in educating our readers about the different types of boats. Here are some of the most popular dual-mast boats.

Table of Contents

Yawls are the most common types of dual-mast boats out there. It has a mainmast and a mizzenmast. The mizzenmast is shorter than the mainmast. It is an oblique boat with the mainmast in the front, and the mizzenmast in the rear. The mizzenmast of the Yawl enhances the balance of the helm, and it is mostly located behind the rudder.

Another essential type of two-mast boat is the Ketch. This boat is often mistaken for a yawl. Therefore, it is better to understand the differences between the two. They both have the mainmast in the front, with the smaller mizzenmast in the rear end. The primary difference between these two is mast location.

In a yawl, the mizzenmast is situated behind the rudder, while in Ketches, the mizzenmast is located in front of the rudder post.  In Ketches, the mizzenmast is just as big as the mainmast, and it carries a mainsail. The purpose of the mizzenmast is to keep the boat moving forward, especially when the conditions are aggressively windy.

On the flip side, the mizzenmast of a yawl can only enhance the helm balance. However, it cannot push the boat forward. Furthermore, the mizzenmast of the ketch is bigger than that of a yawl. It won’t be wrong to say that the mizzenmast of a Ketch is a driving sail, whereas that of a yawl is only a balancing sail.

If we compare a ketch to a sloop , the ketch enjoys a great advantage, especially when moving downward or against heavy winds. The reason behind its success is its versatile design, unlike a conventional sloop. The mizzenmast of a ketch depowers the wind in a number of different ways. It can also find the right amount of canvas for it to fly. It stabilizes the sailboat, provided it is placed in the right position.

Amongst other boats, a ketch offers a number of practical benefits, considering the different weather conditions a boat may face when on water. Apart from sailing smoothly on a beam-reach, ketches are easy to handle, which helps you learn faster if you are still a beginner.

Unlike a ketch, in a schooner , the foremast is smaller than a mizzenmast. Although you can't really spot the difference between the two masts, if you look closely, you will see the difference in their heights. The foremast will appear shorter than the mizzenmast. Unlike a schooner, a sloop has a single mast. However, the schooner is easier to sail, but it isn't as fast as a schooner. That being said, the schooner looks fabulous when under full sail.

The most common schooners out there are the ones with a square topsail. However, there are some shapes out there that run diagonally. On bigger sea routes, schooners with bigger sails aren't the most ideal boats. The reason is that a spirit rig cannot be lowered. If it is, it can become difficult to handle for some people. However, the spirit rig works perfectly in coastal conditions, provided the topsail is capable of catching a high breeze.

Just like the schooners and ketch, the Brigs also have two masts. However, the mainmast is squared, and in some cases, triangular. In some brig boats, the mainmast has a lateen mainsail. Initially, the brigs were used by pirates who pushed them forward using oars.

Therefore, the word brig has been derived from the Italian word brigantine, which means pirate. Before becoming sailboats, briggs were used by pirates in the Mediterranean back in the 16th century. Here are some kinds of brigs.

In a brigantine, the foremast is square in shape, while the mainmast is triangular.

Hermaphrodite Brig

This type of brig is also known as the half brig or the schooner brig. Both the masts on this boat are partially squared, but the primary mast is gaff-rigged. This design makes it the closest thing you can find to a schooner.

The great thing about brigs is that they are fast, maneuverable, and easy to handle. This is part of the reason why pirates used them in the 16th century. Pirates could easily hop in and leave without the fear of getting caught.

These were the most common boats with two masts. If you are a sailing enthusiast, you can opt for any one of them. However, there are a few factors you need to consider. The first two things to consider are your affordability and the reason for purchasing or renting a specific dual-mast boat.

You also need to consider your boating and sailing skills. If you lack experience and boating skills, it is in your best interest to opt for a ketch. Lastly, factor in the weather and the conditions you will be driving your boat in.

Recent Articles

What Size Sailboat Can One Person Handle?

How To Tie A Sailboat To A Mooring Ball Ring

What Is The Ideal Wind Speed When Sailing?

How To Use a Sailboat Winch

Things You Need To Liveaboard a Sailboat

Types of Sailboat Keels

I'm Michael Moris. I've been sailing my whole life, and it has taken me to places I never imagined. From the Caribbean to Europe, from New Zealand to South America - there's nowhere that hasn't felt like home when you're on a boat!

Trending Articles

How Far Is Havana From Miami By Boat?

Yachting Vs Sailing

Who Is Sailing Doodles?

Subscribe To Our Newsletter

Thank you! You're signed up for our free newsletter!

Oops! Something went wrong while submitting the form

About Our Team

We are a publishing team of licensed Nursing Home Administrators, Nurses, Assisted Living Directors, Health Professionals, Gardeners, and individuals with vast experience with senior living and activities.

©2024 Retire Fearless. All rights reserved.

We can be reached via email at [email protected]

Retirefearless.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs such as CJ, ClickBank and more, and is compensated for referring traffic and business to these companies.

Facebook Pinterest

Sailboat Mast: Everything You Need To Know

Anyone who loves sails and boating needs to know their sailing boat from the inside out. If you are new to the sport, then you are probably wondering about things like a sailboat mast and everything around it.

In this article, we have everything you need to know about a sailboat mast, like what it is, its different types, as well as the material it is made of.

All you have to do is keep reading below to find it all out!

What Is A Sailboat Mast?

A sailboat mast is a tall pole that is attached to the deck. It helps secure the sail’s length to the boat and upholds the sail’s structure.

A sailboat mast is the most defining characteristic of a sailboat, helping keep the sail in place. What’s amazing about it is that it can even be taller than the vessel’s length!

Although conventional sailboats use wood, the majority of the newer sailboat masts are constructed of aluminum. The kind of sailboat mast a vessel has depends on the kind of sail plan supported.

What Are The Parts Of A Sailboat Mast?

The sailing mast is essentially a pole that cannot operate effectively without certain critical components.

Moving from the deck to the rest of the sailboat, we can first see the mast boot, which prevents the water from draining down the mast and flooding the cabin.

The stays are the long cords hooked up on each side of the mast, and they hold the mast up off the ground under massive force.

A gooseneck pipe fitting joins the boom to the mast. The sail is raised and lowered using halyard lines that go to the mast’s highest point.

Types Of Sailboat Masts

Rigs with one mast.

Many people that are not aware of the modern sailboat design envision single-mast sailboats.

The reason why this type of sailboat is so widely known is that these masts are low-cost to construct and fairly simple to operate alone.

Sloops, cutters, and catboats are among the most popular rigs with only one mast.

Sloop Masts

Nowadays, sloop rig vessels are the most popular type of sailing boat. Sloops typically have only one mast positioned somewhere on the front third or the middle of the deck, even though some boat models might vary a bit.

A sloop mast is equipped with a big mainsail and a jib sail (see also ‘ Why Are Sails Made In A Triangular Shape? ‘). A Bermuda-rigged sloop has only one towering mast and a triangle-shaped sail. Other not-so-popular gaff-rigged sloops have a significantly smaller mast and bigger 4-point mainsails.

Catboat Masts

Catboats are distinctive New England boats that have a forward-mounted standard mast and a long boom. A catboat, unlike a sloop-rigged boat, is only equipped with one sail.

It is also typically mounted (more or less) right in front of the boat, and it is commonly short and relatively thick.

Catboats are frequently gaff-rigged. In a single-mast design, gaff-rigged sail designs (see also ‘ The Definition And History Of The Lateen (Triangular) Sail ‘) succeed in making the most out of short masts and are relatively simple to maneuver.

The mast of gaff-rigged catboats is shorter than that of a Bermuda-rigged boat of comparable size, but it is typically taller than that of comparable gaff-rigged crafts.

Cutter Mast

A cutter-rigged sailboat has only one towering mast and several headsails, which is why it can be mistaken for sloops when seen from afar.

However, because cutters use numerous headsails rather than one standard jib (see also ‘ Everything You Need To Know About Sailboat Jibs ‘), their masts are typically taller than those of comparable-sized sloops.

In several places, a gaff-rigged cutter is far more usual than a gaff-rigged sloop. Even at times when its sails are folded, a cutter can be distinguished from a sloop.

This is due to the fact that cutters frequently have a protracted bowsprit and two front stays; the forestay and the jib stay.

Rigs With Multiple Masts

Multi-mast sailboats (see also ‘ Small Sailboats: What Are They Called? ‘) are not as popular as single-mast sailboats. That is why the design and structure of a multi-mast boat usually make it classier and more navigable.

A multi-mast boat provides more than simply great looks. It also provides speed and efficient control for skilled seamen.

Most of these boats have two masts, which seem to be frequently smaller than the masts on comparable-sized single-mast crafts. Yawl, ketch, as well as schooner rigs, are among the most popular types.

Yawls are sturdy multi-mast boats whose length ranges from 20 to more than 50 ft. A yawl has a lengthy forward main mast and a small mizzen mast at the back of the vessel. This type is also frequently gaff-rigged and was previously used as a utility boat.

A yawl-rigged boat can also self-steer by using the mizzen mast and sail. The yawl can be distinguished from many other double-mast vessels by its short mizzen mast, which is frequently half the size of the main mast.

Furthermore, the mizzen mast is located toward the back of the rudder post.

Ketch Masts

Ketch masts can be mistaken for yawls with a quick look. However, ketch masts are equipped with two masts of comparable size and a significantly bigger mizzen mast. A ketch boat’s mizzen mast is located at the front of the rudder post.

Ketch-rigged vessels are frequently gaff-rigged, with topsails on each one of their masts. Triangle-shaped sailplanes on some ketch-rigged vessels prevent the necessity for a topsail.

Ketch masts, much like the yawl ones, have a headsail, a mainsail, and a mizzen sail that are similar in size to the mainsail. Finally, a ketch-rigged vessel can sail while handling more than one rear sail.

Schooner Masts

Schooners are some of the most beautiful multi-mast sailboats. They are clearly more similar to ketches than yawls. However, if you closely look at a schooner, you will see that it will feature a smaller foremast and a longer (or nearly equal-sized) mast behind it.

Schooner masts are large and heavy, but they are generally shorter than single-mast vessels of comparable size.

This is due to the fact that double-masted vessels share the sail plan over 2 masts and do not require the additional length to compensate for the reduced sail space.

Finally, they are typically gaff-rigged, with topsails and topmasts that expand the mast’s length.

Masts Of Tall Ships

Tall ships are those traditional large cruising ships that ruled the seas well before age of steam. Renowned ships with this massive and intricate rig setup include the U.S.S Constitution as well as the H.M.S. Victory.

Tall ships have 3 or more massive masts that are frequently constructed using big tree trunks. Tall ships with 5 or more masts are quite common too.

Tall ships typically are as long as 100 feet or more, since the size and sophistication of these square-rigged vessels render them only useful at scale.

Tall ships have main masts, foremasts, mizzen masts, and gaff-rigged jigger masts at the back of their mizzen masts.

Mast Materials For Sailboats

The masts of sailboats (see also ‘ Two-Mast Sailboat Types ‘) are typically constructed of aluminum or other specific types of wood. Until the 1950s, almost all sailboat masts were constructed of wood.

That began changing around the time that fiberglass vessels rose to fame, with aluminum being now the most used mast material.

Aluminum Masts For Sailboats

Aluminum has become the most popular modern mast material. Aluminum masts are lighter in weight, hollow, and simple to produce. Such reasonably priced masts efficiently withstand seawater. These masts are also heavy for their size.

If there is one drawback to this type of mast that would be galvanic corrosion, which happens extremely quickly once seawater is in contact with aluminum and another metal, like steel and copper.

So, in types like the Bermuda-rigged sloop which are frequently made with aluminum, that is an issue.

Wooden Masts For Sailboats

The typical material for sailboat masts is wood, which is still employed for many specially designed boats nowadays.

Wood masts are big and bulky, yet very sturdy, and proper maintenance can guarantee their lengthy (over 100 years!) lifespan. They are also prevalent on gaff-rigged vessels because wood is best suited for short masts.

The Fir family provides the most popular mast wood. Although Douglas Fir is widely used, regional models (such as British, Columbian, and Yellow Fir) are also ideal.

Several sailboats, especially the tall ships, have masts made of pine and sometimes redwood. Other cedar species like the Port Orford or the Oregon cedar, can also be used for masts and spars.

Carbon Fiber Masts For Sailboats

Carbon fiber masts are a relatively new addition to the boatbuilding industry, and they have a few perks over the wood and aluminum ones.

First of all, carbon fiber is both strong and light, making it perfect for sailboats designed for races and which typically have tall masts. The best top-quality carbon fiber masts in the business are used by ships competing in America’s Cup races.

Maintenance Of Masts

It is critical to maintaining the sailboat masts and all of their associated hardware. Masts’ stays, lines, and halyards must be regularly checked, modified, and replaced on a regular basis. Masts made of wood must be lacquered and inspected for rot.

Masts made of aluminum do not typically require regular checks and maintenance, but any indications of a corrosive environment should be acted upon right away.

Build a clear maintenance schedule with your regional boat repairman or boating specialist. Keep in mind that preventative maintenance is always less expensive and simpler than repair work.

Choosing The Right Mast

For those who own a production boat, the options will be determined by the model and manufacturer.

The important factors to keep in mind for one-off boats without a designer sail plan are:

• the masts step’s features
• the length and displacement of the boat
• the addition of backstays and running backstays
• the quantity and placement of chainplates

If the mast is on a step on deck rather than on the structural beam, an image of the step may be useful to the mast maker.

For those who frequently take part in races, a carbon mast will save them from the extra weight and enhance their performance.

The Bottom Line

We hope that this article was helpful in learning more about a sailboat mast, the different types of mast you can see on vessels, as well as the materials they are made of, and their maintenance requirements.

Masts play a vital role in holding the boats in place, allowing people to keep on sailing to their dream destination, and they are also an eye-catching element of sailboats thanks to their vertical form and their length that often surpasses that of the sailboat itself.

Depending on the use of the boat, you will get a different type of mast, and the material it will be made of, its size, height, and weight, will guarantee the best sailing experience!

Related Posts:

17 Sailboat Types Explained: How To Recognize Them

Ever wondered what type of sailboat you're looking at? Identifying sailboats isn't hard, you just have to know what to look for. In this article, I'll help you.

Every time I'm around a large number of sailboats, I look around in awe (especially with the bigger ones). I recognize some, but with most of them, I'll have to ask the owner. When they answer, I try to hide my ignorance. The words don't make any sense!

So here's a complete list with pictures of the most common sailboat types today. For each of them, I'll explain exactly where the name comes from, and how you can recognize it easily.

So here's my list of popular sailboat types, explained:

Bermuda sloop, sailing hydrofoil, dutch barge, chinese junk, square-rigged tall ship, in conclusion, how to recognize any sailboat.

Before we get started, I wanted to quickly explain what you should look for when you try to identify a sailboat.

The type of sailboat is always determined by one of these four things:

• The type of hull
• The type of keel
• The number of masts
• And the type of sails and rig

The hull is the boat's body. There are basically three hull types: monohull, catamaran, and trimaran. Simply said: do I see one hull, two hulls (catamaran) or three hulls (trimaran)? Most sailboats are monohulls.

Next, there is the keel type. The keel is the underwater part of the hull. Mostly, you won't be able to see that, because it's underwater. So we'll leave that for now.

The sail plan

The last factor is the number of masts and the sail plan. The sail plan, simply put, is the number of sails, the type of sails, and how the sails are mounted to the masts (also called rigging ).

Sailboat are mostly named after the sail plan, but occasionally, a sail type is thrown in there as well.

So now we know what to pay attention to, let's go and check out some sailboats!

Dinghies are the smallest and most simple sailboats around.

They are your typical training sailboats. Small boats with an open hull, with just one mast and one sail. Perfect for learning the ways of the wind.

On average, they are between 6 and 20 ft long. Mostly sailed single-handed (solo). There's no special rigging, just the mainsail. The mainsail is commonly a Bermuda (triangular) mainsail. Dinghies have a simple rudder stick and no special equipment or rigging.

Dinghies are great for learning how to sail. The smaller the boat, the better you feel the impact of your trim and actions.

How to recognize a sailing dinghy:

• short (8ft)
• one Bermuda sail
• open hull design
• rudder stick

Common places to spot them: lakes, near docks

If you'd ask a kid to draw a sailboat, she'll most probably draw this one. The Bermuda Sloop is the most popular and most common sailboat type today. You'll definitely recognize this one.

How to recognize a Bermuda Sloop:

• triangular mainsail (called a Bermuda sail)
• a foresail (also called the jib)
• fore-and-aft rigged
• medium-sized (12 - 50 ft)

Fore-and-aft rigged just means "from front to back". This type of rigging helps to sail upwind.

Any sailboat with one mast and two sails could still be a sloop. Even if the sails are another shape or rigged in another way. For example, here's a gaff-rigged sloop (more on the gaff rig later):

If you want to learn all about sail rigs, check out my full Guide to Understanding Sail Rig Types here. It has good infographics and explains it in more detail

The Bermuda sloop has a lot of advantages over other sailboat types (which is why it's so popular):

• the Bermuda rig is very maneuverable and pretty fast in almost all conditions
• it's really versatile
• you can sail it by yourself without any problems
• it's a simple setup

Common places to spot a sloop: everywhere. Smaller sloops are more common for inland waters, rivers, and lakes. Medium-sized and large sloops are very popular cruising boats.

Cutters have one mast but three or more sails. Most cutters are Bermuda rigged, which means they look a lot like sloops.

How to recognize a cutter:

• looks like a sloop
• two or more headsails instead of one
• commonly one mast
• sometimes an extra mast with mainsail

Cutters have more sail area, which makes them faster, but also harder to sail single-handed. There's also more strain on the mast and rigging.

Common places to spot a cutter: everywhere. Cutters are very popular for cruising.

They mostly have a Bermuda rig, which means triangular sails. But there are also gaff cutters and naval cutters, and some have two masts.

Here's an example of a two-masted naval cutter with an extra gaff mainsail and top gaff:

The Hydrofoil is a pretty new sailboat design. It's a racing sailboat with thin wing foils under the hull. These lift up the hull, out of the water, reducing the displacement to nearly zero. The foils create downforce and keep it from lifting off entirely.

This makes the hydrofoil extremely fast and also impressive.

The hydrofoil refers to the keel type. There are both monohull and multihull hydrofoils.

How to recognize a hydrofoil:

• it flies above the waterline and has small fins

Common places to spot a hydrofoil: at racing events

Famous catamaran: La Vagabonde from Sailing La Vagabonde

A catamaran is a type of cruising and racing multihull sailboat with two hulls. The hulls are always the same size.

Most catamarans have a standard Bermuda rig. The catamaran refers to the hull, so it can have any number of masts, sails, sail types and rig type.

How to recognize a catamaran:

• any boat with two hulls is called a catamaran

Common places to spot catamarans: coastal waters, The Caribbean, shallow reefs

The advantages of a catamaran: Catamarans heel less than monohulls and are more buoyant. Because of the double hull, they don't need as deep a keel to be stable. They have a smaller displacement, making them faster. They also have a very shallow draft. That's why catamarans are so popular in the Caribbean, where there's lots of shallow water.

Catamarans are nearly impossible to capsize:

"Compared with a monohull, a cruising catamaran sailboat has a high initial resistance to heeling and capsize—a fifty-footer requires four times the force to initiate a capsize than an equivalent monohull." Source: Wikipedia

How to recognize a trimaran:

• any boat with three hulls is called a trimaran

Trimarans have three hulls, so it's a multi-hull design. It's mostly a regular monohull with two smaller hulls or floaters on the sides. Some trimarans can be trailered by winching in the auxiliary hulls, like this:

This makes them very suitable for long-term cruising, but also for regular docking. This is great for crowded areas and small berths, like in the Mediterranean. It sure is more cost-effective than the catamaran (but you also don't have the extra storage and living space!).

Common places to spot Trimarans: mostly popular for long-term cruising, you'll find the trimaran in coastal areas.

Gaffer refers to gaff-rigged, which is the way the sails are rigged. A gaff rig is a rectangular sail with a top pole, or 'spar', which attaches it to the mast. This pole is called the 'gaff'. To hoist the mainsail, you hoist this top spar with a separate halyard. Most gaffers carry additional gaff topsails as well.

Gaff rigs are a bit less versatile than sloops. Because of the gaff, they can have a larger sail area. So they will perform better with downwind points of sail. Upwind, however, they handle less well.

How to recognize a gaffer:

• sail is rectangular
• mainsail has a top pole (or spar)

Since a gaffer refers to the rig type, and not the mast configuration or keel type, all sailboats with this kind of rigging can be called 'gaffers'.

Common places to spot a gaffer: Gaffers are popular inland sailboats. It's a more traditional rig, being used recreationally.

Schooners used to be extremely popular before sloops took over. Schooners are easy to sail but slower than sloops. They handle better than sloops in all comfortable (cruising) points of sail, except for upwind.

How to recognize a schooner:

• mostly two masts
• smaller mast in front
• taller mast in the back
• fore-and-aft rigged sails
• gaff-rigged mainsails (spar on top of the sail)

Common places to spot a schooner: coastal marinas, bays

How to recognize a ketch:

• medium-sized (30 ft and up)
• smaller mast in back
• taller mast in front
• both masts have a mainsail

The ketch refers to the sail plan (mast configuration and type of rig). Ketches actually handle really well. The back mast (mizzenmast) powers the hull, giving the skipper more control. Because of the extra mainsail, the ketch has shorter masts. This means less stress on masts and rigging, and less heel.

Common places to spot a ketch: larger marinas, coastal regions

How to recognize a yawl:

• main mast in front
• much smaller mast in the back
• back mast doesn't carry a mainsail

The aft mast is called a mizzenmast. Most ketches are gaff-rigged, so they have a spar at the top of the sail. They sometimes carry gaff topsails. They are harder to sail than sloops.

The yawl refers to the sail plan (mast configuration and type of rig).

Common places to spot a yawl: they are not as popular as sloops, and most yawls are vintage sailboat models. You'll find most being used as daysailers on lakes and in bays.

Dutch Barges are very traditional cargo ships for inland waters. My hometown is literally littered with a very well-known type of barge, the Skutsje. This is a Frisian design with leeboards.

Skutsjes don't have a keel but use leeboards for stability instead, which are the 'swords' or boards on the side of the hull.

How to recognize a Dutch Barge:

• most barges have one or two masts
• large, wooden masts
• leeboards (wooden wings on the side of the hull)
• mostly gaff-rigged sails (pole on top of the sail, attached to mast)
• a ducktail transom

The clipper is one of the latest sailboat designs before steam-powered vessels took over. The cutter has a large cargo area for transporting cargo. But they also needed to be fast to compete with steam vessels. It's a large, yet surprisingly fast sailboat model, and is known for its good handling.

This made them good for trade, especially transporting valuable goods like tea or spices.

How to recognize a Clipper:

• mostly three masts
• square-rigged sails
• narrow but long, steel hull

Common places to spot a clipper: inland waters, used as houseboats, but coastal waters as well. There are a lot of clippers on the Frisian Lakes and Waddenzee in The Netherlands (where I live).

This particular junk is Satu, from the Chesapeake Bay Area.

The Chinese Junk is an ancient type of sailboat. Junks were used to sail to Indonesia and India from the start of the Middle Ages onward (500 AD). The word junk supposedly comes from the Chinese word 'jung', meaning 'floating house'.

How to recognize a Chinese junk:

• medium-sized (30 - 50 ft)
• large, flat sails with full-length battens
• stern (back of the hull) opens up in a high deck
• mostly two masts (sometimes one)
• with two mainsails, sails are traditionally maroon
• lug-rigged sails

The junk has a large sail area. The full-length battens make sure the sails stay flat. It's one of the flattest sails around, which makes it good for downwind courses. This also comes at a cost: the junk doesn't sail as well upwind.

The cat rig is a sail plan with most commonly just one mast and one sail, the mainsail.

Most sailing dinghies are cats, but there are also larger boats with this type of sail plan. The picture above is a great example.

How to recognize a cat rig:

• smaller boats
• mostly one mast
• one sail per mast
• no standing rigging

Cat-rigged refers to the rigging, not the mast configuration or sail type. So you can have cats with a Bermuda sail (called a Bermuda Cat) or gaff-rigged sail (called a Gaff Cat), and so on. There are also Cat Ketches and Cat Schooners, for example. These have two masts.

The important thing to know is: cats have one sail per mast and no standing rigging .

Most typical place to spot Cats: lakes and inland waters

Famous brig: HMS Beagle (Charles Darwin's ship)

A brig was a very popular type of small warship of the U.S. navy during the 19th century. They were used in the American Revolution and other wars with the United Kingdom. They carry 10-18 guns and are relatively fast and maneuverable. They required less crew than a square-rigged ship.

How to recognize a brig:

• square-rigged foremast
• mainmast square-rigged or square-rigged and gaff-rigged

How to recognize a tall ship:

• three or four masts
• square sails with a pole across the top
• multiple square sails on each mast
• a lot of lines and rigging

Square-rigged ships, or tall ships, are what we think of when we think of pirate ships. Now, most pirate ships weren't actually tall ships, but they come from around the same period. They used to be built from wood, but more modern tall ships are nearly always steel.

Tall ships have three or four masts and square sails which are square-rigged. That means they are attached to the masts with yards.

We have the tall ship races every four years, where dozens of tall ships meet and race just offshore.

Most common place to spot Tall Ships: Museums, special events, open ocean

This is a bonus type since it is not very common anymore. As far as I know, there's only one left.

The Trabaccolo is a small cargo ship used in the Adriatic Sea. It has lug sails. A lug rig is a rectangular sail, but on a long pole or yard that runs fore-and-aft. It was a popular Venetian sailboat used for trade.

The name comes from the Italian word trabacca , which means tent, referring to the sails.

How to recognize a Trabaccolo:

• wide and short hull
• sails look like a tent

Most common place to spot Trabaccolo's: the Marine Museum of Cesenatico has a fully restored Trabaccolo.

So, there you have it. Now you know what to look for, and how to recognize the most common sailboat types easily. Next time you encounter a magnificent sailboat, you'll know what it's called - or where to find out quickly.

I loved this article. I had no idea there were so many kinds of sailboats.

i have a large sailing boat about 28ft. that im having a difficult time identifying. it was my fathers & unfortunately hes passed away now. any helpful information would be appreciated.

Jorge Eusali Castro Archbold

I find a saleboat boat but i can find the módem…os registré out off bru’x, and the saleboat name is TADCOZ, can you tell me who to go about this matter in getting info.thank con voz your time…

Leave a comment

You may also like, guide to understanding sail rig types (with pictures).

There are a lot of different sail rig types and it can be difficult to remember what's what. So I've come up with a system. Let me explain it in this article.

The Ultimate Guide to Sail Types and Rigs (with Pictures)

How Much Sailboats Cost On Average (380+ Prices Compared)

Own your first boat within a year on any budget.

A sailboat doesn't have to be expensive if you know what you're doing. If you want to learn how to make your sailing dream reality within a year, leave your email and I'll send you free updates . I don't like spam - I will only send helpful content.

Ready to Own Your First Boat?

Just tell us the best email address to send your tips to:

Rigging - Turnbuckles , Toggles , Wire & Rod Components, Norseman Cones & Fittings.

Furling Systems - Systems and replacement parts from a variety of Manufacturers.

Traveller Systems - Adjustable Track Systems for Mainsheet and other applications.

Sailboat Hardware - Rope Clutches, Blocks, Track & Fittings, Winches, etc.

Custom Parts - Custom items, or those out of production or otherwise unavailable.

Consultation - Special projects, research, or information not detailed on-site.

Copyright   1996 - 2024,  Rig-Rite, Inc.        Disclaimer          Web Site maintained by The WATER Group

What Is A Sailboat Mast?

A sailboat mast is one of the most defining features of a sailboat (along with the sails of course!) You can immediately tell that a boat is a sailing boat when you spot the tall mast sticking out of the hull.

But why do sailboats need a mast? Having lived on a sailboat for years now I’ve never really questioned the need for a mast. It’s such an integral part of the boat that I just sort of forget it’s there!

When our friends recently lost their mast due to a rigging failure it got me thinking – why do sailboats need a mast and what function (aside from holding up the sails) do they actually play. It turns out, quite a lot!

We’re going to dive into the fascinating world of sailboat masts, exploring different rigs, mast materials, and the different functions that masts play. It’s important stuff if you want to go sailing, and a lot of it I should have known sooner!

As an Amazon Associate, we earn from qualifying purchases. We also earn from other affiliate programs. This means we may receive a small commission on products purchased through our links at no extra cost to you.

Table of Contents

Why do sailboats need a mast, parts of the mast, what materials are masts made from, single mast rigs, sailboats with two masts, sailboats with three masts, how to look after your mast.

A sailboat mast is a vertical, upright structure that supports the sails of a sailboat. It is a crucial component of the boat’s rigging system and plays a key role in harnessing the power of the wind to propel the vessel. Typically located in the center of the boat, the mast extends upward from the deck or hull.

The height of the mast varies depending on the size and type of the sailboat, directly impacting the sail area and overall performance of the boat.

Together with the boom (a horizontal spar attached to the bottom of the mast), the mast allows sailors to control the shape and orientation of the sails, optimizing their efficiency in different wind conditions.

The design and configuration of the mast can vary depending on the type of sailboat, such as a sloop, cutter, ketch, or schooner.

Sailboats require a mast primarily to support the sails.

It holds the sails in an elevated position, allowing them to catch the wind effectively. Without a mast, the sails would lack the means to be raised and positioned to harness the power of the wind.

There are a few other important jobs that the mast plays:

Control and Manipulation of Sails: The mast, along with the boom (a horizontal spar attached to the mast’s lower end), enables sailors to control and manipulate the sails.

By adjusting the angle and tension of the sails through the mast, sailors can optimize their performance according to wind conditions and desired boat speed.

This control allows for maneuverability and efficient use of wind power.

Structural Integrity: The mast contributes to the overall structural integrity of the sailboat. It helps distribute the loads and forces exerted by the sails, rigging, and masthead components throughout the boat’s hull and keel.

The mast’s design and construction ensure stability and strength, allowing the boat to withstand the forces generated by the wind.

Attachment Points for Rigging: The mast provides attachment points for various rigging components, including halyards (lines used to raise and lower the sails), stays (wires or rods that support the mast in different directions), and shrouds (wires that provide lateral support to the mast).

These rigging elements are essential for properly tensioning the sails and maintaining the mast’s stability.

Height and Visibility: The mast’s height contributes to the sailboat’s visibility, allowing other vessels to spot it more easily, particularly when sailing in congested waters. The mast’s presence also serves as a visual reference for determining the boat’s position, orientation, and distance from potential hazards.

While the mast’s primary purpose is to support the sails and enable control over their position, it also plays a significant role in maintaining the structural integrity of the sailboat and enhancing its visibility on the water.

Basically, the mast is pretty darn important!

Along with a million other confusing sailboat terms , the mast has lots of different parts too. A sailboat mast consists of several distinct parts, each serving a specific function. Here are the different parts commonly found on a sailboat mast:

• Masthead: The masthead is the topmost section of the mast. It often includes attachment points for various components such as halyards (lines used to raise and lower the sails), the forestay (the wire or rod that supports the front of the mast), and other rigging elements. The masthead may also house instruments like wind vanes or antennas.
• Spreaders: Spreaders are horizontal bars attached to the mast, typically positioned at specific intervals along its length. They help support the rigging wires and prevent excessive sideways bending of the mast. The position and angle of the spreaders contribute to the proper alignment and tension of the rigging.
• Shrouds: Shrouds are the wires or cables that provide lateral support to the mast. They connect the mast to the sides of the boat, helping to stabilize the mast and distribute the loads generated by the sails. Shrouds are typically tensioned using turnbuckles or other adjustable fittings.
• Backstay: The backstay is a cable or wire that provides support to the rear of the mast. It helps counterbalance the forces exerted by the forestay and the mainsail, preventing the mast from excessively bending forward. Adjustable backstays allow for tuning the mast’s rigidity based on wind conditions and sail trim.
• Halyard Sheaves: Halyard sheaves are small wheels or pulleys located at the masthead or lower down the mast. They guide halyards, which are lines used to raise and lower the sails. Halyard sheaves minimize friction, allowing smooth and efficient hoisting or lowering of the sails.
• Gooseneck: The gooseneck is a fitting that connects the boom to the mast. It allows the boom to pivot or rotate horizontally, enabling control over the angle and position of the mainsail. The gooseneck may include a pin or other locking mechanism to secure the boom to the mast.
• Mast Step: The mast step is the base or fitting where the mast rests and is secured to the deck or hull of the sailboat. It provides stability and distributes the loads from the mast to the boat’s structure.

These are some of the primary parts found on a sailboat mast. The specific configuration and additional components may vary depending on the sailboat’s design, rigging system, and intended use.

I was surprised to learn that sailboat masts are commonly made from several different materials, each offering its own advantages in terms of strength, weight, and flexibility.

The choice of material depends on various factors, including the type and size of the sailboat, desired performance characteristics, and budget.

Here are some of the materials used for sailboat mast construction:

Aluminum is a popular choice for sailboat masts due to its favorable combination of strength, lightweight, and corrosion resistance. Aluminum masts are relatively easy to manufacture, making them cost-effective. They offer good stiffness, enabling efficient power transfer from the sails to the boat.

Carbon Fiber

Carbon fiber has gained significant popularity in sailboat mast construction, especially in high-performance and racing sailboats. You’ll see black carbon fibre masts on fancy sailboats!

Carbon fiber masts are exceptionally lightweight, providing excellent stiffness-to-weight ratios. This allows for enhanced responsiveness, improved performance, and reduced heeling (tilting) of the boat.

Carbon fiber masts can be precisely engineered to optimize flex patterns and provide targeted strength where needed.

Traditional sailboats, particularly those with a classic or vintage design, may have masts made from wood. Wood offers an aesthetically pleasing and traditional look.

Wooden masts can be constructed using solid wood or laminated techniques, which involve layering thin strips of wood for added strength and stability. Wood masts require regular maintenance, including varnishing and sealing to protect against moisture.

In some cases, steel may be used for sailboat masts, especially in larger vessels or those designed for specific purposes, such as offshore cruising or heavy-duty applications.

Steel masts offer robustness and durability, but they are heavier compared to other materials. They require adequate corrosion protection to prevent rusting.

Composite Materials

Sailboat masts can also be constructed using composite materials, such as fiberglass or fiberglass-reinforced plastics. These materials provide a balance between cost, weight, and strength. Fiberglass masts can be an option for recreational sailboats or those on a tighter budget.

It’s worth noting that advancements in materials and manufacturing techniques continually evolve, introducing new possibilities for sailboat mast construction.

The choice of mast material should consider factors such as boat type, intended use, performance requirements, and personal preferences, balanced with considerations of cost and maintenance.

Different Types Of Masts

There are several different types of masts used in sailboat designs, each with its own characteristics and purposes.

We’ve included how the masts are fixed on the boat. This one is an important one when buying a sailboat as you might have a preference over how your mast is attached to the hull or deck.

We’ve also included different rigs, as some boats have just a single mast and other sailboats will have two or more masts. Again, you might have a preference as to which rig set up you prefer so it’s worth knowing the pros and cons of each.

Keel-stepped Mast

A keel-stepped mast is one that extends down through the deck and is secured to the boat’s keel or structural framework. Keel-stepped masts offer stability and strength, as they transfer the loads directly to the boat’s foundation.

They are commonly found in larger sailboats and offshore cruising vessels. We loved knowing our deck was secured to one of the strongest parts of the boat.

It does come with some problems though, like the fact it can leak and start raining in the boat! A decent mast boot will stop this.

Deck-stepped Mast

A deck-stepped mast rests on a step or fitting on the deck, rather than extending down through it. Deck-stepped masts are typically used in smaller sailboats and are more straightforward to install, maintain, and unstep.

They are often lighter and less expensive than keel-stepped masts but may sacrifice some stability and rigidity.

Fractional Rig

A fractional rig features a mast where the forestay is attached below the masthead, typically at a point less than halfway up the mast’s height. This design allows for a larger headsail and a smaller mainsail.

Fractional rigs are popular on modern cruising and racing sailboats as they offer versatility, easy sail control, and improved performance in various wind conditions.

Masthead Rig

In a masthead rig, the forestay attaches at the top of the masthead. This design is commonly found in traditional sailboats. Masthead rigs typically feature larger headsails and smaller mainsails. They are known for their simplicity, easy balance, and suitability for cruising and downwind sailing.

There are various different rig set ups that just have one single mast. We’ll look at a few of the most popular types, but be aware that there are quite a few variations out there these days! It can get a little complicated!

The sloop rig is one of the most popular and widely used single mast rigs. It consists of a single mast with a mainsail and a headsail. The headsail, typically a jib or genoa, is attached to the forestay at the bow of the boat, while the mainsail is attached to the mast and boom.

Sloops offer simplicity, versatility, and ease of handling, making them suitable for a wide range of sailboats, from small day-sailers to larger cruising vessels.

A cutter rig utilizes two jibs : a smaller headsail attached to the forestay and a larger headsail called a staysail attached to an inner stay or a removable stay.

The mainsail is usually smaller in a cutter rig. This rig provides versatility and options for different sail combinations, making it suitable for offshore cruising and handling various wind conditions.

We absolutely loved our cutter rig as it gave so much flexibility, especially in heavy weather. A downside is that tacking is a little harder, as you have to pull the genoa past the stay sail.

Sailboats with two masts tend to be seen on older boats, but they are still popular and quite common, especially with long-distance sailors looking for versatility.

The yawl rig features two masts, with a shorter mizzen mast positioned aft of the main mast and rudder stock. The mizzen mast is usually shorter than the main mast.

Yawls offer versatility, improved balance, and increased maneuverability, making them suitable for offshore cruising and long-distance sailing.

A ketch rig has two masts: a taller main mast located near the boat’s center and a shorter mizzen mast positioned aft of the main mast but forward of the rudder stock. The mizzen mast is typically shorter than the main mast.

Ketch rigs provide additional sail area and options for sail combinations, offering good balance and flexibility for cruising and long-distance sailing. A lot of long-term cruisers love ketch rigs, though they tend to be found on older boats.

The downside is that you’ll have two masts with accompanying rigging to maintain, which isn’t necessarily a small job.

Sailboats with three masts or more are rare. They tend to be seen only on very large, expensive sailing yachts due to the additional expense of maintaining three masts, rigging and additional sails.

They aren’t great for single-handed crews but they do look very impressive and can power bigger vessels.

Schooner Rig

A schooner rig features two or more masts, with the aft mast (known as the mizzen mast) being taller than the forward mast(s).

Schooners are known for their multiple headsails and often have a gaff-rigged or square-rigged configuration on one or both masts. Schooner rigs offer impressive sail area, versatility, and classic aesthetics.

Schooner rigs are much rarer than the rigs mentioned above so it’s unlikely you’ll find one on a cruising vessel.

These are just a few examples of the different types of masts used in sailboat designs. Each rig type has its own advantages and considerations in terms of sail control, performance, balance, and intended use.

The choice of mast and rig depends on factors such as boat size, purpose, sailing conditions, and personal preferences.

We didn’t know the first thing about looking after our mast when we first moved aboard and we made it our mission to find out. When you’re sailing frequently then the last thing you want is to experience a mast coming down mid-passage!

Taking proper care of your sailboat mast is important to ensure its longevity and optimal performance. Here are some tips on how to look after your mast:

• Regular Inspections: Conduct regular visual inspections of your mast to check for any signs of damage, wear, or corrosion. Look for cracks, dents, loose fittings, or any other issues that may compromise the mast’s integrity.
• Cleaning: Keep your mast clean by regularly washing it with fresh water. Remove dirt, salt, and other contaminants that can accelerate corrosion. Use a mild detergent or boat-specific cleaner, and rinse thoroughly.
• Corrosion Prevention: Protect your mast from corrosion by applying a suitable corrosion inhibitor or protective coating. Pay particular attention to areas where fittings, rigging, or other components come into contact with the mast.
• Lubrication: Lubricate moving parts such as sheaves, shackles, and slides with a marine-grade lubricant. This helps prevent friction and ensures smooth operation. Be cautious not to over-lubricate, as excess lubricant can attract dirt and debris.
• Rigging Maintenance: Inspect your rigging regularly for signs of wear, such as broken strands, fraying, or excessive stretching. Replace any worn or damaged rigging promptly to avoid potential mast damage.
• UV Protection: The sun’s UV rays can degrade and weaken the mast over time. Protect your mast from UV damage by applying a UV-resistant coating or using mast covers when the boat is not in use.
• Storage Considerations: If you need to store your boat for an extended period, consider removing the mast and storing it horizontally or in a mast-up position, depending on the boat design. Store the mast in a clean, dry, and well-ventilated area to prevent moisture buildup and potential damage.
• Professional Inspections: Periodically have your mast inspected by a professional rigger or boatyard to assess its condition and identify any potential issues that may require attention. They can provide expert advice on maintenance and repair.

Remember, if you are unsure about any maintenance or repair tasks, it’s always recommended to consult with a professional rigger or boatyard to ensure proper care and safety of your mast.

We learned so much from having our rigging inspected, so we highly recommend you do this if you’re at all unsure.

Conclusion: What Is A Sailboat Mast?

In conclusion, a sailboat mast is a crucial component that plays a vital role in the performance, control, and integrity of a sailboat. It’s a good idea to learn about sailboats before you head out on a sail – unlike us!

The mast serves as a vertical structure that supports the sails, allowing them to capture the power of the wind effectively. The mast enables sailors to control and manipulate the position of the sails, optimizing performance based on wind conditions.

Additionally, the mast contributes to the overall structural integrity of the boat, distributing loads and forces throughout the hull and keel. Various rigging components, such as halyards, shrouds, and spreaders, are attached to the mast, providing support and enabling precise sail control.

By understanding the importance of the mast and properly caring for it through regular inspections, cleaning, corrosion prevention, lubrication, and rigging maintenance, sailors can ensure their mast’s longevity and optimal performance.

A well-maintained sailboat mast contributes to a safe, enjoyable, and successful sailing experience.

• How much do new sails cost?
• How long do new sails last?
• Storm sails

Similar Posts

7 Best Sailboat Watermakers For Liveaboards 2024

7 Large Cockpit Sailboats: When Size Matters

Is Sailing For The Rich?

Is Sailing Hard To Learn?

19 Must Have Items For Sailboat Living 2024

How To Learn To Sail For Free

DWYER MAST & RIGGING

The Aluminum Mast C ompany

Quality Sailboat Masts, Booms, Hardware and Rigging Since 1963

Dwyer Mast & Rigging manufactures high-quality sailboat masts, booms, hardware, and rigging. Originally founded in 1963 as Dwyer Aluminum Mast Company, the legacy continues as an OEM supplier by taking advantage of improved manufacturing methods to offer a wide range of products and services for the marine industry.

Our Services Include

Mast & Boom Extrusions   //  Dinghy & Keelboat Spars   // Standing & Running Rigging  //  Hardware & Blocks   //  Round Tubing   // OEM Supplier // Waterjet Technology //  & more...

Manufacturing for the Marine Industry

Our formula for growth is simple - we never compromise with quality. By taking advantage of improved manufacturing methods and an ever-increasing volume, we have been able to maintain competitive prices and continue to provide much needed product to sailors, riggers, and boat builders. 

Products & Servic es

Cont act Us