1977 32 ft endeavour sailboat

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Pay My Bill
• Customer Service

• Free Newsletter
• Give a Gift

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Open Transom Pros and Cons

Mailport: Charley Morgan, Locker Safety, Fast Bottom Paint

Do-it-yourself Electrical System Survey and Inspection

Install a Standalone Sounder Without Drilling

The Tricked Out Tillerpilot

Resolving Common Steering Problems

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

In Search of the Snag-free Clew

The Cruising Sailor’s Argument for High-tech Fibers

Breaking Point: What Can Go Wrong With Your Yanmar?

Rudder Mods for Low-speed Docking

Using Heat to Bend PVC Pipe

Mildew-resistant Caulks for Boats

Can We Trust Plastic Boat Parts?

Repairing Molded Plastics

Mailport: Marine plywood, fuel additives, through bolt options, winch handle holders

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Rhumb Lines: Livin’ the Wharf Rat Life

Resurrecting Slippery Boat Shoes

Shoe Goo’s Gift to Sailors

PS Advisor: Tank Monitor and Camera Mount Hacks

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

The Ultimate Guide to Caring for Clear Plastic

Preventing Mildew in Marine Fabrics

Gearing Up for Winter Sailing

• Sailboat Reviews

Endeavour 32

Though now a bit dated, the endeavour 32 is a comfortable, capable cruising boat..

The Endeavour 32 began life back in 1970 as the Irwin 32. Ted Irwin designed her as a dualpurpose cruiser-racer before the development of the IOR. By 1975, the IOR was in full swing, and boats such as the Irwin 32 were obsolete as racers, since PHRF had not yet emerged to help handicap non-competitive boats raced at the club level.

Although the Irwin 32 had been out-designed for racing, the hull was still a comfortable design for cruising. The molds for the Irwin 32 formed the basis for Endeavour Yacht Corporation, which continued to build the boat as the Endeavour 32 until 1982.

Although the Irwin 32 and the Endeavour 32 look identical and have the same displacement, the Endeavour 32 is listed by the builder as being 4″ wider, 4″ longer overall, and 6″ longer on the waterline.

The Irwin 32 was originally available as a keel/centerboard boat drawing 3′ 6″, or with a long fin keel drawing 5′. The Endeavour 32 was originally a keel/centerboarder with the same configuration as the Irwin 32, or with a fixed shoal keel with 4′ 2″ draft. The original Irwin deeper keel was discontinued. Beginning in 1979, the keel/centerboard model was discontinued in favor of the shoal keel version.

Sailing Performance

Although the rig of the Endeavor 32 is fairly large, her relatively heavy displacement compared to dualpurpose 32-footers built today makes her somewhat slower than a more modern boat of the same overall length. The Endeavour 32’s ballast/displacement ratio of 40% implies a fairly stiff boat, but because of the boat’s shoal draft and narrow beam she is not as stiff as newer, lighter boats of the same length. While the Endeavour 32 is not a tender boat, her narrow beam and relatively high center of gravity mean she will heel fairly quickly.

Unless you buy a boat equipped with fairly new sails, there’s a good chance that the sails that come with a used Endeavour 32 will be approaching the end of their useful lives. Cruising sailors are notorious for making their sails last forever. After all, they’re cruisers, not racers. But cruising boats usually need all the power they can get to drive them due to relatively inefficient hulls and rigs.

The Endeavour 32’s PHRF rating of about 186 to 192 suggests a boat that is significantly slower than modern 32-footers, but comparable in speed to other boats of her vintage. The original Ericson 32, for example, has about the same rating, while the original Pearson 33 is about 10 seconds per mile faster. Owners report the Endeavour 32 to be underpowered in winds of under 10 knots. Owners in our survey have mixed opinions about the boat’s balance under sail, with some reporting excessive weather helm while others feel the boat to be well balanced. One advantage of the centerboard version is that the center of lateral resistance can be shifted by moving the board, reducing weather helm on a reach.

With the keel version, you don’t have the luxury of shifting the center of lateral resistance. We doubt that the keel version will go to weather as well as the centerboard boat. At the same time, the keel version does have a slightly lower vertical center of gravity, and should be somewhat stiffer when it breezes up. The specifications for the original Irwin 32 claim an extra 200 pounds of ballast for the centerboard boat, but the Endeavour brochure does not specify any difference in ballasting between keel and centerboard versions.

The rig is a simple single-spreader masthead rig with double lower shrouds, stepped on deck. No owners in our survey reported any problems with the deck-stepped spar, and one owner had sailed his boat to Bermuda and back. Tuning of the rig is straightforward, even for beginning sailors. Rigs don’t get much simpler than this.

We would be tempted to replace at least one of the mast-mounted halyard winches with as big a two-speed winch as we could fit. You don’t necessarily need it to hoist sails, but you’re also going to take crewmembers to the masthead on the winch. People on 32-footers weigh just as much as people on 40-footers, yet the standard halyard winches on the Endeavour 32 and most other boats in this size range make it impossible for a smaller crewmember to hoist a larger one to the masthead. It is one of the perversities of two-person sailing that the larger of the two—usually a man—insists on going up the mast, while the smaller—usually a woman—cranks the winch. You will also see the same logic prevail in anchoring: the man steers while the woman muscles the anchor up and down. It’s sort of like having the jockey carry the horse around the racecourse.

Shrouds are mounted at the edge of the deck, but since the boat is relatively narrow, this position does not dramatically reduce windward ability. For reaching, it is possible to sheet the genoa to the slotted aluminum toerail.

One change we would make to improve sail handling for cruising would be to add self-tailing winches. The original winches for the boat are too small for easy trimming of a big genoa, and self-tailers are simply a must on any cruising boat. The coamings are wide enough to go up one or two winch sizes.

We also recommend a modern roller-reefing headsail system for cruising. To use it effectively, it will be necessary to install a genoa track inboard of the lifelines on both sides of the boat. As a rollerreefing headsail is reduced in size, the sheet lead must move forward to accommodate the change in clew position. To do this by shifting the position of a snatch block on the toerail is grossly inefficient, and means you will probably never have the lead in the proper position. Even without roller-reefing headsails, the genoa track is a must for decent windward performance.

All Endeavour 32s came with diesel engines, but there is a lot of difference in the engines that were used. In 1975, 1976, and 1977 models, a 12 hp Yanmar diesel was standard equipment. In our opinion, that engine is simply too small for a boat this size. It will be fine in a flat calm, but there’s not enough power to push the boat into any wind or sea. Some boats in the same period were equipped with the Westerbeke L-25 engine, and others with the Yanmar 2QM20. The bigger Yanmar became standard in 1978, but a three-cylinder Universal diesel of about 24 hp was also an option in late-model boats.

With every engine except the single-cylinder Yanmar, performance under power is more than adequate. Our own engine preference would be either the larger Yanmar or the Universal diesel. The most serious complaint voiced about the engine installation is noise. The engine compartment has no sound insulation. Access for service is reasonable.

A surprising number of owners responding to our survey report that the boat is impossible to back down in a straight line under power. Part of the problem may stem from the hull shape, but there is little doubt that much of it comes from the extreme downward angle of the prop shaft. In reverse, the water is thrown against the bottom of the boat, which we suspect does little to help steering.

A two-bladed fixed prop is standard. A three-bladed prop was optional. We wouldn’t want to drag around a three-bladed fixed prop due to the boat’s exposed prop installation. The best choice by far would be a three-bladed feathering prop, which we suspect would also improve the boat’s handling in reverse.

Construction

No owners responding to our survey report major structural problems. There are, however, reports of hairline gelcoat crazing on both the hull and deck. One owner also reported extensive deck delamination. Still another comments that a surveyor found loose tabbing around a bulkhead in the forward cabin. In general, there were a higher than average number of owner complaints about gelcoat.

The frequency of bottom blistering reports is about average for boats generally sailed in warmer waters.

Another odd complaint from one owner concerns flaking gelcoat inside the integral fiberglass water tank under the forward berths. The tank was all but unusable until he cut openings in the top and resurfaced the inside. In addition, once inside the tank he discovered that the internal baffles had come loose. A water tank this far forward in the boat can significantly affect trim as water is consumed. Several owners report that the boat normally sits down by the stern. A full water tank forward will offset this problem, at the expense of increased pitching moment. As a rule, heavy consumables such as water and fuel should be carried near the middle of the boat, where the effect on trim will be minimized.

Several owners mention that their boats are equipped with gate valves rather than proper seacocks. This should show up on any survey. We feel that gate valves are inappropriate for use below the waterline, and should be replaced.

The lead ballast is carried inside the molded fiberglass keel. While this eliminates keelbolts and their associated problems, it means that you should pay prompt attention to any grounding damage to the keel, which could allow water inside the laminate.

On older boats, there is no deck fill for the water tank forward. Later boats do have deck fills, and some owners of older boats also installed them. They’re a good idea, since dragging a water hose below can be a real nuisance, and filling the tank from jerry jugs would almost be guaranteed to cause a mess below.

There are no deck scuppers, so water tends to pool at the low point in the sheer inboard of the aluminum toerail. Likewise, the cockpit scuppers are not flush, so the cockpit does not drain entirely.

Several owners of centerboard versions complain about the exposed centerboard pennant. With the board fully extended, about 3′ of wire is exposed and vulnerable below the boat. This is an unusual arrangement required by the very high aspect ratio board.

In general, owners of the Endeavour 32 feel that the boat is sturdily built, and reasonably finished, with the exception of the large number of reports of gelcoat defects.

For a relatively narrow boat, the Endeavour 32 is roomy. Headroom on centerline is about 6′ 4″. The original stepped cabin trunk—an Irwin design trademark—was replaced in the middle of the boat’s production history with a more modern-looking cabin trunk which is slightly tapered in profile. Cabin headroom was not significantly altered. Headroom is carried well forward over the forward cabin.

There is no door between the main cabin and the forward cabin, which limits privacy when cruising with more than two people. A privacy curtain was an option.

Storage space is used very effectively on the Endeavour 32. Since the water and fuel tanks are located in the ends of the boat, there is a lot of space available under the settees in the main cabin.

The galley is fairly small, which is typical of boats of this period. The icebox, however, is huge—about 10 cubic feet. We’d be tempted to reduce its size by adding more insulation on the inside of the box. Six cubic feet of icebox is more than adequate for a boat this size.

There are three legitimate sea berths on the Endeavour 32: the port and starboard main cabin settees, and the port quarterberth. These berths are all parallel to the boat’s centerline, so your head is neither above nor below your feet when the boat heels. Berths at odd angles to the centerline may be interesting visually, but they’re only functional when the boat is at rest.

Adding overhead handrails in the main cabin would be useful; there are very few things to grab onto in a seaway.

There are 10 opening ports in the cabin trunk of the Endeavour 32. This makes for very good ventilation when the boat is docked or anchored, but does nothing when the boat is underway and the ports are closed. If you leave ports open underway, you’re asking for a drenched interior from a stray wave or powerboat wake.

Ventilation would be greatly improved by installing cowl vents in dorade boxes. We would put two at the aft end of the main cabin, just forward of the dodger breakwater on later models, one over the head, and one over the passageway between the main cabin and the forward cabin. Be careful not to place the forward vents where they will interfere with working at the mast.

The biggest single complaint about the interior of the Endeavour 32 is the lack of a navigation station or chart table. When this boat was designed, navigators of even 40-footers frequently had to work on the cabin table or icebox lid. Today, almost every boat over 30′ has some sort of nav station—a must in the days of electronic gizmos.

All in all, the interior of the Endeavour 32 is comfortable and workable. Joinerwork is of good production boat quality. In later boats, the interior teak is varnished. There’s no  reason you couldn’t do this to an older boat if that finish appeals to you.

Conclusions

The Endeavour 32 is a comfortable, reasonably capable cruising boat. It would make a good coastal cruiser or island hopper. The basic design and construction are sound enough to justify the numerous additions and modifications necessary to make the boat suitable as a limited offshore cruiser for areas such as the Bahamas or the Caribbean.

The most troublesome aspect of the boat is the large number of owners in our survey reporting gelcoat flaws. While in most cases these are cosmetic, they are expensive to repair, and unsightly if not repaired.

Later boats with the more modern deck molding—recognizable by the lack of step in the profile of the cabin trunk—are in our opinion more desirable than the earlier boats. Likewise, look for a boat with a bigger engine than the original 12 hp Yanmar diesel.

To make it easier to handle, you’ll have to spend a fair amount of money on upgrading things such as winches and sail handling equipment. This is only worthwhile if you plan to keep the boat for a while.

The Endeavour 32 is quite a bit narrower than a modern boat of the same length, which makes the interior look a little smaller. At the same time, the beam is carried well aft, which tends to increase space in the cockpit.

Because of the lack of privacy below, this is not really a good family cruising boat for long periods of time. A privacy curtain forward would help, but a door for the forward cabin would be even better.

In appearance, the Endeavour 32 is somewhat dated, yet we would hesitate to call her appearance “classic.” Still, her styling may be a little easier on the eye long after today’s Euroboats have gone the way of tailfins and chrome bumpers.

RELATED ARTICLES MORE FROM AUTHOR

Leave a reply cancel reply.

Log in to leave a comment

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• Endeavour 32

Endeavour 32 Boats for sale

1977 Endeavour 32

Blaine, Washington

Make Endeavour

Category Cruiser

Posted 1 Week Ago

The owner has had this Endeavour for about a year. He is dealing with the caretaking of his Father and needs to sell the boat. The boat is currently cluttered with purchases that he made to update the vessel. Interior pictures of the boat as it currently is and as it was before storing all of his purchases are included. His purchase goes with the sale of the vessel. The Beta Marine engine runs well. New bottom paint. Overall the boat is in great condition, far above the average condition for her age. Per the seller: All systems are operational and there are no known issues. Stock #374162 Well maintained 1977 Endeavour 32 with a Beta engine! The 1977 Endeavour 32 is a cruising classic. It is about as comfortable of a cruiser that can be found. Only about 600 hulls were made, so finding this one on the market is a great opportunity for its new owner. Above deck, the sails are in good condition and it comes with extra sails. The aft cockpit provides plenty of room for the captain and guests. The walkways are wide and the vessel is easy to get around making it easy to sail singlehanded or with a crew. Below deck, the Endeavour has 6'4" headroom and teak abounds. The sole and the interior walls are made of teak with enough white walls and ceilings to keep the salon bright. The cushions have been reupholstered. The V-berth is spacious and has room to dress. The V-berth has both a hanging locker and drawers. There is a double berth on the port side of the settee. The dinette table folds down and behind the table is a storage area. This is a very favorable layout giving the berth a lot of space to get around. Port aft is a quarter berth. The galley includes a sink, alcohol stove/oven, 10 cu. ft. ice box, and plenty of storage. The galley also has plenty of countertop space. The head has a shower, a marine toilet, a sink, and a mirror, and has ample space to move about. Affordable for all sailors, this Endeavour is a both joy and a pleasure to sail for either the beginning or experienced sailor.

Buffalo, New York

This 1977 Endeavour 32 sloop has normal wear & tear for a vessel this age. It's been on the hard for about a year. The seller lived on it and used it regularly the summer before. At that time the engine ran strong, and the boat sailed nicely. The seller was in the process of updating the boat, but life has him moving in different directions now, and wishes to let someone else enjoy the boat. Stock #375878 ***SALE PENDING*** Endeavour 32 sailboat with new paint on deck and hull, Recent Main and Genoa sails! Get ready to cruise the world in this classic design 1977 Endeavour 32! The Endeavour 32 was the first boat from Endeavour and was actually the same basic hull as the earlier Irwin 32 with modifications by Dennis Robbins, the in-house designer for Endeavour at this time. She was originally designed as a dual-purpose cruiser-racer. A nice, clean, conservative, and comfortable design for cruising. The hull is molded as a single unit of a combination of polyester resin and fiberglass. The exterior finish is pigmented gelcoat and molded into fiberglass. The keel is molded integrally with the hull and all ballast is contained inside. The keel is the shoal keel with a max draft of 4'-2". The interior layout is typical with a V-berth forward, the head (to port), and lockers (starboard) dividing it from the main salon area which has a fold-up dining table. The port side settee pulls out to create a double berth, the starboard is a single, and Aft to port is a pilot berth To the starboard is the galley which consists of the sink, refrigerator, and oven. The electrical panel is located immediately under the companionway, and the stairs remove to allow access to the engine. There are 10 opening ports and two large deck hatches. The engine is the reliable Yanmar 2GM and the propeller shaft is made of 1" stainless steel, she has a dripless shaft seal and Max-Prop prop. The sail inventory consists of a newer main sail and rolling furling headsail. A lot boat for the buck, she's ready for the open seas. Looking for offers! Reason for selling is does not use enough.

1979 Endeavour 32

Stuart, Florida

Category Sailboats

Posted Over 1 Month

1979 Endeavour 32 Powered by a 2006 single 30 hp Yanmar diesel inboard engine, last run 7/2015.  Only has 400 hours.  Originally the Irwin Classic 32 this model was modified by Dennis Roberts for Endeavour.  She is an excellent coastal cruiser.  She sleeps six adults comfortably.  Great cabin layout with 6' 3" headroom.  10 ports and 3 deck hatches make this a bright, open, and airy cabin.  Her hull needs was.  Her deck is solid.  Interior/Exterior upholstery are both in very good condition.  Has binnical steering and shore power.  Electronics gps, vhf radio, sails are good.  Has fixed keel.

1982 Endeavour 32

Naples, Florida

1982 Endeavour 32,Health Issues force the sale of this very capable and mechanically sound boat. The new diesel has very few hours and the autopilot was only used a few times since new. Very few boats in this price range have such solid functioning systems. All this boat needs is cosmetic work. At this price, this one won't last long.Text the phone number or email to arrange a viewing in Isles of Capri, Florida $13900, 9046077771

Rochester, New York

1977 Endeavour 32 New listing

1979 Endeavour 32' Sloop

Kemah, Texas

Model 32' Sloop

1979 Endeavour 32' Sloop PRICE REDUCED $7,000! SELLER SAYS SELL NOW! The Endeavor 32 is known for her comfort and versatility and configured with a fixed shoal keel and 4'2" draft, extensive interior storage and access, fully equipped galley, integral companion way stairs, and a teak cabin sole. The hull is molded as a single unit of a combination of polyester resin and fiberglass woven roving and multidirectional chopped strand fiber (MCSF). The keel is molded integrally with the hull and all ballast is contained inside. The deck and cockpit, like the hull, are molded as a single unit of a combination of polyester resin and fiberglass woven roving and MCSF. Plywood coring is incorporated between layers of fiberglass in the cabin top, deck, seat, and cockpit sole areas to give additional stiffness.  There is an anchor well at the bow with anchor rode into the vberth locker, teak grab rails on the cabin top and a large aft cockpit with good back rests and storage lockers. The companionway goes down to seat height, about 12" above the cockpit sole, and has three drop boards. The rudder is molded as a single piece of solid high density foam with a protective skin of fiberglass and gelcoat finish. The rudder post, molded integrally with the rudder, is solid stainless steel, welded to a steel blade in the interior of the rudder. Where the rudder post passes through the hull, water tightness is ensured by means of a stuffing box. The steering system operates with stainless steel cables rotating a quadrant bolted and keyed to the rudder post. All spars (mast, boom, and spreaders) are extruded aluminum alloy, with protective coating. The main mast is stepped on deck with a supporting post immediately under the mast inside the cabin. The standing rigging is made of stainless steel wire. The forestay attaches to the stem head fitting at the bow, fabricated of welded stainless steel back plates through bolted to the hull. All other stays and shrouds are attached to chainplates at the edge of the deck and are through bolted to the hull. Additional fiberglass reinforcement is molded into the hull in all chain plate areas. All halyards are run externally to #32 Lewmar winches mounted on the mast. Sheets are led to #40 Lewmar self tailing winches in the cockpit. Sheet lead blocks clip to the toerail. The main sheet traveler is mounted on the companionway 'bridge deck'. The interior of the Endeavour 32 is a molded fiberglass unit with bulkheads and cabinetry fastened to it with screws, bolts, and adhesives. The entire unit is preassembled outside the boat and is bonded in place with woven roving and mat, that when completed, forms a single unit structure having great strength and rigidity. The interior is finished with varnished teak with soft white overheads. The

1975 Endeavour Endeavor 32

Norwalk, Connecticut

This is a 1975 Endeavor 32 with a recently replaced (purchased new) Yanmar diesel that runs perfectly. Comparable boats are selling for $12-$14k. She's in sail away condition, though needs some cosmetic work and TLC. Fun Long Island Sound sailing vessel. She can be sailed immediately and worked on over time. If you like sailing boats, and want to get into something solid, safe, and a good size, with a very new inboard engine, then this boat will serve you well. The exterior varnish needs redoing, and parts of the interior have been stripped and are being rebuilt along the starboard main cabin. She needs new cushions inside and out. The "head" is in pristine condition! The engine was REPLACED five years ago with a new Yanmar 2YM15 at a cost of $10,000, and it has less than 100 hours on it! When the wind picks up, she's a wolf in sheep's clothing. As the wind picks up (+10kts), she gains speed and the water line begins to stretch out. Her narrow beam allows for good directional stability and keeps the bow from "digging" in like many wide stern boats being built today. It's a simple, forgiving, stout cruising boat. If you are looking for some fun on the water and want to get in below $10k, this is a great opportunity. Many more details I can email to you if interested...too much to fit here.

1978 Endeavour 32

Riverside, Rhode Island

Private Seller (401) 437-0085 Photos Photo 1 Close Request Information * Name First Name * Email Telephone (optional) Best Time to Contact Anytime Morning Mid-day Evening Question/Comments (optional) Shop Safely: Protect Your Money. By using this site, you agree to our Terms of Use. Contact Seller 1978 Endeavour 32, Priced to sell! Well cared for charming sailboat ready for your enjoyment of Narragansett Bay and surrounding waters. Per survey by Atlantic Marine Surveyors done for insurance purposes 3 years ago "we are of the opinion this vessel has had good care and maintenance as evidenced by its overall good condition". Roomy cockpit with teak table and cup holders. Bottom has been newly painted. Main sail replaced in 2006 and Genoa replaced in 2007. Comfortably sleeps 4. Alcohol stove with oven and spacious ice box. This 1978 sailboat has had just two caring owners. Current owner purchased this boat in 1998. e-mail is [email protected] & cell phone is 401-437-7863 $13900, 4014370085 Be sure: Get a boat history report|Finance this boat|Get an insurance quote|

1978 Endeavour 32 Ft. Sloop

Eckerman, Michigan

Sleeps 6, diesel power, 3rd owner, gently used. Many upgrades, $30,000 invested. Too old to sail anymore. Priced to sell NOW, $8,000 or best reasonable offer. As is, where is. Located in St. Ignace. 906-748-5656

Sleeps 6, diesel power, 3rd owner, gently used. Many upgrades, $30,000 invested. Too old to sail anymore. Priced to sell NOW, $10,000 or best reasonable offer. As is, where is. Located in St. Ignace. 906-748-5656

1979 Endeavour Sloop

1979 Endeavour Sloop Boat is located in Kemah,Texas.Please contact the owner @ 210-833-four zero nine four or bluestarshuttle(at)yahoo(dot)com...Amazingly clean and solid yacht, with 2Qm20 Yanmar, AC Heater, VHF, XM SatelliteCD. You can change Station without going into the Cabin, Rear Start Button, Very Nice Clean Interior, HeadShower. This yacht needs nothing,Has Strong Sail, Lines Etc. Has new Craftsman Tool Set, extra sailing Hardware, extra screws,lights, bulbs, Life Jackets, New Batteries, Just a solid well taken care of Original Yacht. Come and enjoy a Day of Sailing Without any Obligation. Make: Endeavour Model: Sloop Length: 32 Dealer: BoatsFSBO.com ID: 218773 Ad provided by BoatingBay

ENDEAVOUR 33 SAILBOAT 1984

Rome, New York

Classic, fast shoal draft cruiser with rich teak interior, AC and heat, and lots of extras. Spacious salon. If you are in the market for your first family sailboat or looking for a vessel to explore the coastal US, then you need to see this sturdy 1984 Endeavour sailboat. Traditional layout, comfortable and ready to explore. Good setup for the solo sailor. She would also make a very nice live aboard! Current yard rent paid until October 2014. Family illness forces sale. SPECIFICATIONS LOA: 32' 7" LWL: 27' 6" Beam: 11' 6" Draft: 4' 6" Displ.: 11,350 lbs. Ballast: 4,600 lbs. enclosed lead Mast Height above DWL: 48' 9" Rigging: Masthead Sloop Sail Area: 539.5 sq. ft. Main Sail Area: 228.15 sq. ft. Fore Sail Area: (100%) 310.5 sq. ft. SA/D: 17.09 B/D: 40.50 % D/L: 244 Hull Speed: 7.3 knots PHRF - Northeast: 156 Designer: Bruce Kelley Fuel Capacity: 36 gallons Fresh Water Capacity: Approx. 56 gallons Holding Tank: 12.5 gallonsACCOMMODATIONS Spacious Saloon with beautiful solid teak doors and cabinetry throughout. Traditional layout in good condition. V-Berth forward. Salon features L-shaped port settee (converts to double) with a fold away table and starboard bench settee. Single quarter berth & navigation table to port. Galley to starboard. · Nav. Station: Flip Top chart table at forward edge of Quarter berth, three drawers, Rolled chart storage · Head: Located aft of the master to port with vanity, holding tank, head, sun shower, bulkhead mirror, three lockers, drawer, fiddled shelf storage and screened port · Teak bulkhead mounted table with hinged extension and bookshelf/cabinet behind. · Blue upholstered settees/berths in good shape · Generous lighting throughout. TV/FM coaxial cable wiring at shelf over hanging locker · Berths: 6 · Headroom: 6' 2" ENGINE & MECHANICAL · Yanmar 3GM30F Diesel, fresh water cooled, professionally and regularly maintained. · Engine hours: 1,625. · Racor fuel filter · Dripless stuffing box · 3-blade bronze prop, serviced · 36 gallon, welded aluminum fuel oil tank HULL & DECK · Solid KlegeCell foam core decks (no balsa to rot), no soft spots anywhere. No hull blisters. · Skeg mounted rudder for directional stability and strength · Anchor roller at bow · Bruce anchor w/ chain, 200’ 5/8” rode in deep bow locker, excellent condition · Secondary Danforth anchor with chain & rode · Teak hand rails · Anodized aluminum toe rails · Propane deck locker, stbd., with aluminum tank, manual & electric shut-off · West Marine propane kettle grill and canvas cover-like new · Outboard motor mount · Custom foam cockpit cushions · S/S swim ladder · Boarding gates P & S · Fenders & dock lines · Cockpit Speakers · Companionway teak boards, refinished, stow in stbd. lazarette storage pockets. · Companionway swing doors, removable (need repair HELM · Edson pedestal w/38" SS destroyer wheel with 2 instrument pods · 5” Danforth compass in SS hood · Teak folding cockpit table · Removable Edson teak drink caddy SAFETY · Type III PFD's · LifeSling · CO Monitor · Fire Extinguishers · Flare kit · 12V Bilge Pump · Manual bilge pump · First Aid Kit SALON · Spacious interior layout with large fold-out table (shelves behind) · Abundant drawer and locker storage throughout. · 10 opening ports & two large overhead hatches · Teak & holly sole in good condition · Several 12v lighting fixtures · 12 volt fan · 1 Wood framed companionway screen · 1 Wood framed hatch screen GALLEY · SS Galley Maid propane stove and oven · Large icebox with shelves · Adler Barbour 12V refrigeration · SS Sink with H/C pressure water · Microwave oven · Flo-Jet 12 Volt electric water pump, demand type with an accumulator tank. · Whale foot operated water pump in the galley (needs mounting). · Beautiful solid teak stove-top/cutting board with green Silestone insert, with storage slot · Built-in plate and utensil storage · Wine glass rack · Cookware and tableware V-BERTH · V-berth 6'6" · 12 V fan & Solar powered vent fan in hatch · 1 Wood framed Hatch screen · 2 drawers, 2 side shelves & cabinet HEAD · Enclosed head with shower & sump pump · SS sink with hot & cold pressure water · Teak cabinets and storage · Holding tank monitor · Holding Tank: 12.5 gallons with Y-valve and pump-out ELECTRONICS · Autohelm with hand-held remote · West Marine VHF580 Radio · Depth Sounder · Knot meter · Aiwa 40 watt Stereo FM/AM/Aux input with 2 interior KLH speakers and 2 cockpit speakers · Mast-mounted TV-FM antenna · Mast-top VHF antenna ELECTRICAL · 12,000 BTU CruisAir Air conditioning / heating · Breaker Panel: 12 volt DC; 110 volt AC · 4 Batteries (2-12V, 2-6V) · Battery isolator · Xantrex 40Watt multistage battery charger · 110 volt 30A Ship-to-shore cable - 50 ft. · Seaward SS water heater, 6 gallon, 115 VAC/ heat exchanger. · 2 Mast-mounted P&S deck lights · Chart table gooseneck light - red · Brinkman Q-Beam 12V Spotlight, 400,000 CP CANVAS · Two-part full-deck awning/sun-shade (a $1,400 item) · Bimini on SS frame · Helm cover · Sail Cover · Winch covers · SS dodger frame-no canvas STANDING RIGGING · Hood roller furling on head stay · SS wire standing rigging & chain plates · Four (4) each port & stbd. shrouds · Keel-stepped aluminum spar-Exc. Cond. RUNNING RIGGING · Two (2) Lewmar No. 43 two speed self-tailing primary winches w/covers. · Two (2) Lewmar No. 8 single speed mast mount halyard winches. · 2 winch handles · Harken 4:1 ball-bearing mid-boom mainsheet traveler, cabin mounted · Hardware in place / sail cover designed for lazy-jack system. Needs lines. · Genoa tracks with twin-sheet Schaeffer blocks, port and stbd. · Dacron braid sheets · Dacron braid halyards, internal & external, outhaul & topping lift · Aft turning (cheek) blocks port & stbd. SAILS · Footless main sail - new and unused · Original main sail · Genoa head sail - roller furling with UV stripe FRESH WATER TANKS · Polypropylene tank mounted below the stbd. settee, 36 gallons · Polypropylene tank located under port side aft quarter berth, est. 20 gallons, w/ separate deck fillSPARES / EXTRAS / OTHER · Includes 5 Hostar stackable jack stands for off-season layup ($1,000 value) · 4 – 10”x10”x2’ Hickory staging blocks · New Beckson port screens · Tool set in drawer · Hatch WindScoop for ventilation · Stern flagstaff & flag · All manuals, incl. Yanmar · 115VAC Vacuum cleaner · New extra odor-resistant hose for sanitary plumbing · Deck brush, cabin brush and dust pan · Boat hook · Custom compact winter cover scaffolding-ready for tarp (shown in photos) · V-belts, engine hoses, hardware, etc. RECENT UPGRADES INCLUDE · Brand new main sail - never used · Epoxy hull re-faring · Cushions covers removed, cleaned & repaired · Compass serviced · Holding tank seal maintenance, cleanout and sanitizing · New shaft zinc · Bottom paint (9/2014) · Hull polish & wax (9/2014) Work Needed: Woodwork around forward port lights in main salon needs to be repaired/replaced. Bright work: hand rails, cockpit table and taffrailNew price reflects work needed on rudder. Recent repair did not work to seal it and there is water inside. SS rudder post is good and rudder seems solid, is probably serviceable but may ultimately need better repair or replacement. Price: US $ 19,500Located in Rome, NY on the Erie Canal (accessible to Lake Champlain, the Atlantic Ocean or the Great Lakes). This vessel is sold AS IS, WHERE IS.Not included / Negotiable: 8.5' Zodiac/West Marine dinghy, RU260, with oars, pump, bag, repair kit, plus 3.3 hp Mercury outboard - excellent. $950New-in-box Lewmar 1000 Pro-Series 12V Windlass, Stainless Steel. $700Pair (2) of new Lewmar Ocean Series 16CST Self-Tailing Winches, Chromed Bronze. $950 Call: 315-733-7305 (H) Text: 315-368-4939 (C) Email: [email protected] Endeavour 33: http://www.endeavourowners.com/boats/e33/e33brochure.pdf http://sailboatdata.com/viewrecord.asp?class_id=1878 http://sailboatdata.com/view_builder.asp?builder_id=27 http://sailboatdata.com/view_designer.asp?designer_id=162 Zodiac/WM RU-260 Inflatable “Roll-Up” Dinghy: https://www.youtube.com/watch?v=Z0FSSffq5zM http://www.inriodulce.com/lostandfound/RU260.html Mercury 3.3 hp Outboard: https://www.youtube.com/watch?v=MLY-tuSCkK4 http://www.mercury-marine.eu/mercury/en/Products/Products.aspx?Model=TwoStroke%203.3 Lewmar Winch 16CST: http://lewmar.com/products.asp?id=8150&lid=25361

Classic, fast shoal draft cruiser with rich teak interior, AC and heat, and lots of extras. Spacious salon. If you are in the market for your first family sailboat or looking for a vessel to explore the coastal US, then you need to see this sturdy 1984 Endeavour sailboat. Traditional layout, comfortable and ready to explore. Good setup for the solo sailor. She would also make a very nice live aboard! Current yard rent paid until October 2014. Family illness forces sale. SPECIFICATIONS LOA: 32' 7" LWL: 27' 6" Beam: 11' 6" Draft: 4' 6" Displ.: 11,350 lbs. Ballast: 4,600 lbs. enclosed lead Mast Height above DWL: 48' 9" Rigging: Masthead Sloop Sail Area: 539.5 sq. ft. Main Sail Area: 228.15 sq. ft. Fore Sail Area: (100%) 310.5 sq. ft. SA/D: 17.09 B/D: 40.50 % D/L: 244 Hull Speed: 7.3 knots PHRF - Northeast: 156 Designer: Bruce Kelley Fuel Capacity: 36 gallons Fresh Water Capacity: Approx. 56 gallons Holding Tank: 12.5 gallonsACCOMMODATIONS Spacious Saloon with beautiful solid teak doors and cabinetry throughout. Traditional layout in good condition. V-Berth forward. Salon features L-shaped port settee (converts to double) with a fold away table and starboard bench settee. Single quarter berth & navigation table to port. Galley to starboard. · Nav. Station: Flip Top chart table at forward edge of Quarter berth, three drawers, Rolled chart storage · Head: Located aft of the master to port with vanity, holding tank, head, sun shower, bulkhead mirror, three lockers, drawer, fiddled shelf storage and screened port · Teak bulkhead mounted table with hinged extension and bookshelf/cabinet behind. · Blue upholstered settees/berths in good shape · Generous lighting throughout. TV/FM coaxial cable wiring at shelf over hanging locker · Berths: 6 · Headroom: 6' 2" ENGINE & MECHANICAL · Yanmar 3GM30F Diesel, fresh water cooled, professionally and regularly maintained. · Engine hours: 1,625. · Racor fuel filter · Dripless stuffing box · 3-blade bronze prop, serviced · 36 gallon, welded aluminum fuel oil tank HULL & DECK · Solid KlegeCell foam core decks (no balsa to rot), no soft spots anywhere. No hull blisters. · Skeg mounted rudder for directional stability and strength · Anchor roller at bow · Bruce anchor w/ chain, 200’ 5/8” rode in deep bow locker, excellent condition · Secondary Danforth anchor with chain & rode · Teak hand rails · Anodized aluminum toe rails · Propane deck locker, stbd., with aluminum tank, manual & electric shut-off · West Marine propane kettle grill and canvas cover-like new · Outboard motor mount · Custom foam cockpit cushions · S/S swim ladder · Boarding gates P & S · Fenders & dock lines · Cockpit Speakers · Companionway teak boards, refinished, stow in stbd. lazarette storage pockets. · Companionway swing doors, removable (need repair HELM · Edson pedestal w/38" SS destroyer wheel with 2 instrument pods · 5” Danforth compass in SS hood · Teak folding cockpit table · Removable Edson teak drink caddy SAFETY · Type III PFD's · LifeSling · CO Monitor · Fire Extinguishers · Flare kit · 12V Bilge Pump · Manual bilge pump · First Aid Kit SALON · Spacious interior layout with large fold-out table (shelves behind) · Abundant drawer and locker storage throughout. · 10 opening ports & two large overhead hatches · Teak & holly sole in good condition · Several 12v lighting fixtures · 12 volt fan · 1 Wood framed companionway screen · 1 Wood framed hatch screen GALLEY · SS Galley Maid propane stove and oven · Large icebox with shelves · Adler Barbour 12V refrigeration · SS Sink with H/C pressure water · Microwave oven · Flo-Jet 12 Volt electric water pump, demand type with an accumulator tank. · Whale foot operated water pump in the galley (needs mounting). · Beautiful solid teak stove-top/cutting board with green Silestone insert, with storage slot · Built-in plate and utensil storage · Wine glass rack · Cookware and tableware V-BERTH · V-berth 6'6" · 12 V fan & Solar powered vent fan in hatch · 1 Wood framed Hatch screen · 2 drawers, 2 side shelves & cabinet HEAD · Enclosed head with shower & sump pump · SS sink with hot & cold pressure water · Teak cabinets and storage · Holding tank monitor · Holding Tank: 12.5 gallons with Y-valve and pump-out ELECTRONICS · Autohelm with hand-held remote · West Marine VHF580 Radio · Depth Sounder · Knot meter · Aiwa 40 watt Stereo FM/AM/Aux input with 2 interior KLH speakers and 2 cockpit speakers · Mast-mounted TV-FM antenna · Mast-top VHF antenna ELECTRICAL · 12,000 BTU CruisAir Air conditioning / heating · Breaker Panel: 12 volt DC; 110 volt AC · 4 Batteries (2-12V, 2-6V) · Battery isolator · Xantrex 40Watt multistage battery charger · 110 volt 30A Ship-to-shore cable - 50 ft. · Seaward SS water heater, 6 gallon, 115 VAC/ heat exchanger. · 2 Mast-mounted P&S deck lights · Chart table gooseneck light - red · Brinkman Q-Beam 12V Spotlight, 400,000 CP CANVAS · Two-part full-deck awning/sun-shade (a $1,400 item) · Bimini on SS frame · Helm cover · Sail Cover · Winch covers · SS dodger frame-no canvas STANDING RIGGING · Hood roller furling on head stay · SS wire standing rigging & chain plates · Four (4) each port & stbd. shrouds · Keel-stepped aluminum spar-Exc. Cond. RUNNING RIGGING · Two (2) Lewmar No. 43 two speed self-tailing primary winches w/covers. · Two (2) Lewmar No. 8 single speed mast mount halyard winches. · 2 winch handles · Harken 4:1 ball-bearing mid-boom mainsheet traveler, cabin mounted · Hardware in place / sail cover designed for lazy-jack system. Needs lines. · Genoa tracks with twin-sheet Schaeffer blocks, port and stbd. · Dacron braid sheets · Dacron braid halyards, internal & external, outhaul & topping lift · Aft turning (cheek) blocks port & stbd. SAILS · Footless main sail - new and unused · Original main sail · Genoa head sail - roller furling with UV stripe FRESH WATER TANKS · Polypropylene tank mounted below the stbd. settee, 36 gallons · Polypropylene tank located under port side aft quarter berth, est. 20 gallons, w/ separate deck fillSPARES / EXTRAS / OTHER · Includes 5 Hostar stackable jack stands for off-season layup ($1,000 value) · 4 – 10”x10”x2’ Hickory staging blocks · New Beckson port screens · Tool set in drawer · Hatch WindScoop for ventilation · Stern flagstaff & flag · All manuals, incl. Yanmar · 115VAC Vacuum cleaner · New extra odor-resistant hose for sanitary plumbing · Deck brush, cabin brush and dust pan · Boat hook · Custom compact winter cover scaffolding-ready for tarp (shown in photos) · V-belts, engine hoses, hardware, etc. RECENT UPGRADES INCLUDE · Brand new main sail - never used · Epoxy hull re-faring · Cushions covers removed, cleaned & repaired · Compass serviced · Holding tank seal maintenance, cleanout and sanitizing · New shaft zinc · Bottom paint (9/2014) · Hull polish & wax (9/2014) Work Needed: Woodwork around forward port lights in main salon needs to be repaired/replaced. Bright work: hand rails, cockpit table and taffrail.Price: US $ 26,500Located in Rome, NY on the Erie Canal (accessible to Lake Champlain, the Atlantic Ocean or the Great Lakes). This vessel is sold AS IS, WHERE IS.Not included / Negotiable: 8.5' Zodiac/West Marine dinghy, RU260, with oars, pump, bag, repair kit, plus 3.3 hp Mercury outboard - excellent. $1,200New-in-box Lewmar 1000 Pro-Series 12V Windlass, Stainless Steel. $700Pair (2) of new Lewmar Ocean Series 16CST Self-Tailing Winches, Chromed Bronze. $950 Call: 315-733-7305 (H) Text: 315-368-4939 (C) Email: [email protected] Endeavour 33: http://www.endeavourowners.com/boats/e33/e33brochure.pdf http://sailboatdata.com/viewrecord.asp?class_id=1878 http://sailboatdata.com/view_builder.asp?builder_id=27 http://sailboatdata.com/view_designer.asp?designer_id=162 Zodiac/WM RU-260 Inflatable “Roll-Up” Dinghy: https://www.youtube.com/watch?v=Z0FSSffq5zM http://www.inriodulce.com/lostandfound/RU260.html Mercury 3.3 hp Outboard: https://www.youtube.com/watch?v=MLY-tuSCkK4 http://www.mercury-marine.eu/mercury/en/Products/Products.aspx?Model=TwoStroke%203.3 Lewmar Winch 16CST: http://lewmar.com/products.asp?id=8150&lid=25361

35' 1985 Endeavour Sloop

La Conner, Washington

Please call boat owner Lee at 360-431-8482. Documented vessel, New Ray Marine autopilot, Lowrance 7" chartploter/fishfinder , new dodger Bimini and full enclosure. Propane(new aluminum tank) cooktop and gimbaled microwave, 110 genoa on Harken roller, like new main sail with 1 reef point, ground tackle, included with the boat as is the 4HP 4 stroke Tohatsu outboard and 10' Avon RIB dingy. Keel stepped mast. Boom recently finished. Yanmar diesel with new 32 gallon tank, 76 gallon fresh water. 15 gallon holding tank. 6'2" headroom, led lighting. Lowrance HDS7 chart plotter, standard horizon HX850S vhf ,new dodger, bimini and full enclosure, all brightwork maintained, fin keel 5' draft. 13' 6" spinnaker pole, bottom tackle, last Bottom paint October 2012 . Flares with gun, air horn and ships bell. Pacific Northwest charts. Magma BBQ, hot and cold pressure water. Deep double sink. Refrigerator and ice box. Head is forward to port with vanity and shower. Cockpit Shower, 110 volt air conditioning. I am able to show by appointment only on Fridays, Saturdays, And Sundays .

2009 Endeavour 38 Power Cat

Port Aransas, Texas

Private Seller (937) 430-1447 Photos Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10 Photo 11 Photo 12 Photo 13 Photo 14 Photo 15 Photo 16 Photo 17 Photo 18 Photo 19 Photo 20 Photo 21 Close Request Information * Name First Name * Email Telephone (optional) Best Time to Contact Anytime Morning Mid-day Evening Question/Comments (optional) Shop Safely: Protect Your Money. By using this site, you agree to our Terms of Use. Contact Seller 2009 Endeavour 38 Power Cat, 2009 Endeavour Catamaran offered by original owner. Fully optioned lightly used and professionally maintained. Major tune recently completed 11/2013 including engines, props, shaft seals and bottom job. The space of a much larger mono-hull with the efficiency of a Cat. Cruise at 7-9 mph and run at 18 mph. Manufactured in Florida by Endeavour. Offered at 60% of replacement cost. Optioned with 500 gallon fuel capacity, 200 port, 200 starboard and 100 aft with fuel polishing/transfer system. Carries 115 gallons of water supported by a water maker. Draws three feet of water with protected props. Beam is 16 feet wide allowing access to slips and standard travel lifts. Air clearance is under 15 feet w/ antennas down. Ideally suited for inter-coastal and Great Loop. Mechanical Twin Yanmar 315 hp w/1200 hrs. Northern Lights Generator 6 KW sound shld. 750 hrs Xantrex 2.5 kw charger inverter AGM house 4, 4D and starting 2 27, batteries Fuel Transfer and Polishing System Power Dink Davits with hard dink and 15 hp motor Katydyne Water Maker, Galley Sea Gull Filter Power Windlass chain rode, Fortress & Plow Anchors Solar with Xantrex Controller,550 watt systemElectronics Raymarine C120, Fish/Depth, Radar, Chart plotter USA/Bahama Electronic Charts current thru 6/2014 ICOM VHF w/helm mike, ICOM 710 SSB with Ham Bands KVH Sat. TV, glomex broadcast AntennaInterior Large Salon w/ Ekornes Stressless leather recliners Flat Screen 32 inch TV with Bose Sound System All interior teak factory varnished Large Salon windows w/ pull shades & sunscreens Refrigerator w/ freezer and Tundra Freezer Convection/Microwave Oven Splendide Washer/Dryer combination Upgraded Heads with separate holding tanks Cruisaire 16 K Turbo AC/Heat Units (2) Two Queen bed Staterooms, TV in Master Head w/ Shower on Starbd side, Head on Port side Three salon hatches w/ screens, shades & covers Stainless Port windows w/ peek-a-boo shadesCockpit Large fully enclosed w/ sunscreens Dual Deluxe Helm Chairs Upgraded Helm Station Seating for eight with convertible table Full windshield w/ wipers and washers Spotlight forward, floodlight aft Helm controls set up for single handed operation Aft Cockpit area allows easy boarding and fishing Washdown Forward, Cockpit Shower Aft. Currently located in Corpus Christi, Texas area. Cruising to Florida in spring $289000, 9374301447 Be sure: Get a boat history report|Finance this boat|Get an insurance quote|

Narrow Results

Current search reset all.

• Keyword: endeavour 32
• Endeavour (6)
• Sailboats (4)
• Cruiser (2)
• New York (5)
• Florida (4)
• Michigan (2)
• Washington (2)
• Connecticut (1)
• Rhode Island (1)
• POP Yachts (2)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

2009 HELLSBAY Ambush

Oak Hill, FL

2006 Starcraft Elite 226 CR Sport

Dahinda, IL

2016 Centurion ENZO FS44

Grand Rivers, KY

2017 Sailfish 245 DC

Des Plaines, IL

2012 Chaparral 246 SSi

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

• Forums New posts Unanswered threads Register Top Posts Email
• What's new New posts New Posts (legacy) Latest activity New media
• Media New media New comments
• Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
• Classifieds Sell Your Boat Used Gear for Sale
• Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
• Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe

1977 Endeavour 32

• Thread starter Luzern
• Start date Nov 9, 2013
• Forums for All Owners
• Ask All Sailors

Hopefully this is the correct forum to post this message. If not, let me know and I will post in the correct forum. I am considering purchasing a 1977 Endeavour 32 and will be inspecting it soon. I would appreciate any inputs into particular areas of trouble/ weakness to focus upon. From what I could gather by online posts I realize it is heavy and prone to a bit of weather helm which doesn't really deter me. Intended use is mostly coastal cruising with an occasional trip once or twice a year into the keys/ Caribbean. I would also appreciate inputs of owners past or present as to the pros and cons of this boat. Thanks, Greg  

Luzern said: Hopefully this is the correct forum to post this message. If not, let me know and I will post in the correct forum. I am considering purchasing a 1977 Endeavour 32 and will be inspecting it soon. I would appreciate any inputs into particular areas of trouble/ weakness to focus upon. From what I could gather by on line posts I realize it is heavy and prone to a bit of weather helm which doesn't really deter me. Intended use is mostly coastal cruising with an occasional trip once or twice a year into the keys/ Caribbean. I would also appreciate inputs of owners past or present as to the pros and cons of this boat. Thanks, Greg Click to expand

You might want to go here to read owner reviews.... http://www.endeavourowners.com/info.html ...and that site has a lot of Endeavour information. We looked at a 32 and ended up with a 37 and have been happy with her but very limited on the water experience so far :cry:. The 32 we drove a long ways to look at looked great on the Internet and like a different boat in person as far as condition. Where is the 32 you are going to look at? Our 37 is at Charlotte Harbor Boat Storage, Sum [FONT=Arial, sans-serif] ============================ [/FONT] Our Endeavour 37 Our MacGregor 26-S Pages Our Trips to Utah, Idaho, Canada, Florida Mac-Venture Links  

what engine is on boat? well made, solid and simple...depends on asking price  

I had a 1978 32' years ago and loved it I have had it out in the Atlantic is 12-15' seas. Windows leaking was my main problem other than that I loved the boat.  

Yes, if the boat still has the plastic Beckson ports in the cabin they are likely toast, or at least leak. All about maintenance & condition of an older boat like that. Ok sailor. Nice interior. A friend of mine owns I believe a 1980 model E32. Got some blisters happening on the hull.  

CalebD said: ....A friend of mine owns I believe a 1980 model E32. Got some blisters happening on the hull. Click to expand

I had an Irwin 32 which is the same mold as the Endeavor. It did have a weather helm which I could never correct, but it was a good boat. The Endeavor is better built than the Irwin and I would not hesitate to own the boat again.  

Barnacle Bill

I have some customers who have an Endeavor 32 and they love it, but they had to rebuild the mast step near the keel because it deteriorated. So, I suggest you take a peek at that area. I sailed and Endeavor 34 center cockpit ketch (LOA 37') all over Florida and the Bahamas for quite some time and it was a great boat. Russell Wakefield (now an old man) used to be the Endeavor dealer in south Florida and sold them all over Florida and put them into the Bahamas.  

Thank you all for the inputs. I have taken a first look at the boat. Naturally the posted pictures made it look better than it did close up in person. It needs work (including replacing all the portlights- are there drop in replacements?). The boat seemed fundamentally sound. For it's age I found very little delamination areas on the deck. Fair amount of gelcoat cracks but nothing that seemed structural. Things that would need fixing include patching the cracks in the gelcoat and painting the deck. Boat is in the water so I haven't seen the hull yet but will have it pulled if I think I definitely want to attempt to but. I have to presume that it needs some bottom painting. Owner says it has never had blisters, but seeing is believing. Rigging seemed decent but I'd have it inspected prior to purchasing as well. No broken stands that I could detect from the deck. Engine is an original Yanmar. It ran well and no smoke in the exhaust. The oil was a bit blacker than I thought it should be, but maybe it just needs changed. Of course at its age and with raw water cooling, it may need replacement sooner rather than later. The boat is very basic with no significant upgrades to speak about. It needs all the exterior bright work refinished and some of the interior needs work (cosmetic not structural as far as I can see. Also some leaks in the hatch areas and around a couple of the windows that need to be address. Anybody have any surveyor recommendations, rigger, and diesel mechanic recommendations in the Miami to Key West area? Thanks for the inputs and help. Greg  

What Yanmar does it have? I had a Paceship 26 wiht a Yanmar YSE8 and the oil in that engine was always blacker than the night, even shortly after an oil change. Tsi despite a new cylinder liner and new rings etc. It was a great and very very dependable engine.  

py26129 said: What Yanmar does it have? Click to expand

All Endeavour 32s came with diesel engines, but many different engines were used. In the 1975, 76, and 77 models, a 12hp Yanmar (1QM) diesel was standard equipment--fine for flat calms but not enough power to push to windward in any wind or sea. Some boats in the same period were equipped with the Westerbeke L-25 engine, and others with the Yanmar 2QM20 (22hp 2-cyl) which was available in the late 70's. While the bigger Yanmar became standard in 1978, a 3-cylindar Universal diesel of about 24hp was also an option in late model boats........... Click to expand

It needs work (including replacing all the portlights- are there drop in replacements?). Click to expand

Stu Jackson

Luzern said: ...It needs work (including replacing all the portlights- are there drop in replacements?). Click to expand

Sumner, I read most everything on the Endeavor owners site which in part prompted me to go take a look at the boat. I appreciate the effort to post the link. For you and others commenting about the engine, it is the 2 cylinder Yanmar. I can't imagine that the one cylinder Yanmar was effective for such a displacement. If it had that one I'd for sure have to factor in repowering. Greg  

Stu, thanks for that link. I especially like the window puller. I'm sure that must avoid some frustration. I followed the links about the official process for replacing the windows and the reality of it. Its like most jobs on a boat that one thinks is a 1 hour job but turns into a 4 hour job and requires you to closely related to an octopus to be able to reach/ hold all the associated parts at one time! Greg  

Barnacle Bill, thanks for this input. I didn't notice anything at the base of the compression post, but I also didn't sound that area or inspect it too closely. Is there a wooden beam directly under the post? From what I saw it looked like the post was on fiberglass, but the glass could have covered a wooden beam underneath. Your comment is interesting because one of the few areas on the cabin deck that sounded like it might be delaminated was beside the mast. It was a very small area, about as long as the mast base (4-6 inches long and perhaps 3 inches or so out from the mast.) It also looked like the fiberglass very slightly dipped in right at the junction of the mast, but maybe my eyes were playing tricks on me. The starboard side of the cabin deck at the mast was sound and didn't seem to have the dip. When I say dip, it might have been all of 1/16 of an inch, perhaps less. Do you know the details of how this area was repaired? I would presume it requires stepping the mast, removing the compression post and cutting away the area of glass and wood that deteriorated, replace wooden cross member and reglassing. I'm not trying to suggest it is a walk in the park, but was there something in the repair that might not be immediately apparent and requiring expert effort? Greg  

All Important is what are they asking for this boat? Is the price worth the work that goes into it. I am in your area and would love to go look at the boat with you. I am not an expert, but I do know about boats after being an owner and having always repaired my boats myself for 40 years.  

Hi Higgs, thank you for the offer, but better be careful as I may take you up on it! It's a 5 hr drive from Cape Coral, so I want to be reasonably certain I will make an offer on it before doing that drive again. I am in the process of trying to determine what some of the repairs might cost be. The engineer in me wants to do all the repair work myself (although going up the mast always sets off the self preservation alarms!) but the sailor in me wants it done sooner. I travel a lot so my diy repairs will take quite a while. My approach at this point is get rough estimates for the major items and use that as a basis to determine if an offer is warranted. Since we are new to the SWFL area I really don't know which yards do good work. If you have recommendations that would be helpful. In particular would be a welding shop that can do some railing repair. I would also like to get your thoughts on what some of the repairs might take if one does it themselves. Since I may get to a point of negotiating on this boat, I'd rather have that communication more privately. May I PM you about some of my concerns?  

Luzern said: ... Since we are new to the SWFL area I really don't know which yards do good work. If you have recommendations that would be helpful.... Click to expand

Sumner, thanks for the input. As far as I can tell my choices for a diy yard are the one you mention and one way up the river in the general area of Alma. Neither are close ( 1hr drive or so to either). I am not fixated on the Endeavour and have looked at some Hunters and Irwins so far. I will consider others as well. It seemed that Endeavour owners were generally pleased and the boats seem to be more or less well constructed for the boats of that time. The particular boat I looked at seemed to have been better maintained in the pictures and from discussions with the owner than was evident in person. I'm trying to determine if the cost to make it shipshape is reasonable relative to a boat that is already well maintained. Of course ideal would be a boat that is repowered, rerigged, no delamination and brand new sails with every high end electronic gizmo known to man, but I haven't found that yet for my budget!  

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

Boats for Sale

32' endeavour 32 racers and cruisers.

Stock #332134 - Very clean boat, sail or live aboard, memory foam mattress in V-berth, comfortable and clean cabin We are looking for people all over the country who share our love for boats. If you have a passion for our product and like the idea of working from home, please visit WhereFreedomTakesYou [dot] com to learn more. This listing has now been on the market a couple months. Please submit any and all offers today! Reason for selling is not using. At Pop Yachts, we will always provide you with a TRUE representation of every vessel we market. We encourage all buyers to schedule a survey for an independent analysis. Any offer to purchase is ALWAYS subject to satisfactory survey results. You have questions? We have answers. Call us at (941) 538-7803 to discuss this boat. Selling your boat has never been easier. At Pop Yachts, we literally sell thousands of units every year all over the country. Call (855) 218-2805 and we'll get started selling your boat today. Take a look at ALL ***68 PICTURES*** of this vessel on our main website at POPYACHTS DOT COM. We appreciate that you took your time to look at our advertisement and we look forward to speaking with you!

• Specifications
• Description

Condition The seller reports the boat to be in good operational condition with systems working as designed and maintenance up to date. The boat appeared in good cosmetic condition with low signs of wear apparent. Buyers are advised to complete their own inspections prior to a final purchase decision to confirm condition. Navigational Equipment - Compass - Covers - Display - GPS / Plotter (Garmin) - Masthead Light: - Navigation Lights - VHF (Icom M602) Mechanical - Bilge Pump - Fuel Injected - Rudder - Throttle/shift: Mech Electrical Systems - 110v AC Outlets - 12 V DC Outlets - AC Electric Panel - Batteries ( Number Of) (3) - Battery Switch (3) - Battery Tender - Fuel Gauge - Oil Pressure Gauge - Shore Power - Tachometer - Water Heater - Stereo (Jensen) - Bluetooth Accommodations - Cabin Lighting - Cabinets - Hanging Locker - Head - Port Holes - Pressurized Water System - Salon - Settee - V Berth Construction - Bottom Paint Antifouling Deck Gear - Anchor - Anchor Locker - Anchor Rode - Bimini - Bow Rail - Cleats - Fixed - Cockpit Seating - Cockpit Table - Cover - Cockpit - Full Enclosure - Isinglass - Rub Rails - Sea Cocks - Self Bailing Cockpit - Steering Wheel - Transom - Closed Safety Equipment - Grab Rails - Yacht Certified Sails - Dodger - Roller Furling Jib - Roller Furling Main Rigging - Backstay - Blocks - Boom - Forestay - Lifelines - Mast - Running Rigging - Sloop Rig - Traveler - Winches - Manual - Standing Rigging

Connecting with Marinesource.com

Copyright 1992-2024 MarineSource Network, Inc. All Rights Reserved.

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

1977 Endeavour 32

• Description

Seller's Description

A cruising classic! You have found a 1977 Endeavour 32 that is the comfortable cruiser that you have been looking for! Only about 600 of the hulls were made so this might be your only opportunity!

Above deck you have recently updated sails including a storm sail! The aft cockpit is a generous size providing plenty of room for guests to join the captain in the experience! The wide walkways and the non-skid deck make this Endeavour a pleasure to sail for two or a crew!

Below deck the teak companionway with three drop boards and is pretty easy to enter and exit. The Endeavour has a headroom of 6’ 3” so your taller sailors will be happy! Their is teak abound from the floor to a few interior walls but just enough soft white walls and ceiling to not make it feel to cramped.

The V-berth with filler cushions is very spacious with room to dress along with a hanging locker and some drawers! There is a double berth tucked under the port side settee and a fold-down table for dining. There is also a port side quarter berth!

The galley has a sink, stove, icebox and storage cabinets and countertop space.

The head has a shower, a marine toilet, sink, mirror and has ample space to move about.

This is just the beginning of what this Endeavour has to offer either a first time sailor or a seasoned one!

Please feel free to ask questions or make an offer!

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

The ENDEAVOUR 32 was the first boat from Endeavour and was actually the same basic hull as the earlier IRWIN 32 with modifications by Dennis Robbins, in-house designer for Endeavour at this time. Other changes to the design (by Bob Johnson?) were made in 1980. Earlier ENDEAVOUR 32’s could be purchased with a fin keel or keel-centerboard (like the IRWIN). By 1979, both the deep fin keel and keel-centerboard versions had been dropped in favor of a shallower draft, fixed keel model. Shown here is the later version. See ENDEAVOUR 32 CB for more details.

Keel/CB version: Draft BD: 7.83’ Draft BU: 3.5’ Shoal draft fixed keel: 3.16’

This listing is presented by PopYachts.com . Visit their website for more information or to contact the seller.

View on PopYachts.com

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.