snark sailboat rigging

Ian Schaefer

some things

Super Snark Sailboat

I just bought this sailboat, an 11′ Super Snark. I’ve wanted to learn to sail for a few years—this seemed like the perfect sailboat with which to start. It is purportedly unsinkable and very stable. The ABS clad EPS foam hull certainly seems very durable and indeed, could not possibly sink even if completely swamped.

I had it out for the first time this weekend and had a fantastic time. This was my very first time sailing, but I found the boat quite easy to handle – the basic sailing instructions I’ve read were enough to get me underway with this small sailboat. With a little ‘effort’ I was even able to capsize the Super Snark and shortly thereafter learn how easy it is to right this boat. I’ll save the details of that story for another time.

After the first trip out I realized that all the wood parts – rudder, tiller, keel, transom – needed some attention. The marine plywood rudder was delaminating, and though it would be simple to cut a new one, I thought it might be worthwhile to repair it. After gluing and clamping the rudder in several places, I sanded and varnished all of the wood parts.

I also plan on painting the outside of the hull – navy blue. I’ll keep the white gunwhale and medium blue bumper as is. This motif should work nicely with then existing blue-white-blue-white striped sail and equally well with an Egyptian cotton colored sail I’d like to have.

Super Snark Links

• CastleCraft Repair Tips for Snark Sailboats
• CastleCraft Super Snark Sailboat Parts
• Snark Sailboats Group on Yahoo! – Membership required
• How to Sail a Boat – wikiHow [This article is short and to the point. I think it’s worth a read if you are new to sailing.]
• Grog’s Boating Knots Index [Note: start with the figure eight and bowline knots.]

Want a New Snark Sailboat?

I was surprised to learn that Snark sailboats are still being made – not only the Super Snark, but also the Sea Skimmer, Sunflower, and others. If you don’t have the time or inclination to repair an older boat, a shiny new Snark is still a relatively affordable way to start sailing. Here are a few links to the best prices available through Amazon.

Rigging the Super Snark

More Snark Upgrades

Splash Deck – I am planning to sail in the bay at Stone Harbor, New Jersey in late September. It can get choppy there – and while the summer boat traffic will have diminished I have yet to deal with the wake of a decent sized powerboat. The splash deck covers the area of the otherwise open hull from the mast step forward to the bow, shedding water the boat might take on from chop and wake. Coming over the bow. I am nearing completion of a wooden splash deck and I am excited about my design and the results. I will post photos and detail soon. Boom Vang – Provide downward tension on the boom for better sail shape and to minimize ‘bounce’. Use the free end of the halyard through the gooseneck of the boom and back to the cleat.

Traveller – create a bridle using a short length of line between the two screw eyes on the inside of the transom, leaving enough slack in the line to come up and over the tiller with clearance. Thread a small block on the bridle before fastening the line on the eyes. Then the tack end of the main sheet is secured to the dead eye of the block allowing the tack to travel along the bridle.

Tiller Tamer – Loop a short bungee cord around the tiller and connect to the screw eyes on the inside of the transom. This should exert just enoungh tension on the tiller to bring the rudder back to center when the tiller is released.

Daggerboard Retainer – attach on or two screw eyes into a small plywood plate on the stern end of the daggerboard trunk. From these eyes, run a bungee cord around the aft edge of the daggerboard. Pulling on the bungee allows the daggerboard to be raised or lowered – releasing it should hold the board in any vertical position.

Kickup Rudder – Design and make a two-piece rudder to replace the old one-piece rudder, allowing for easy beaching of the sailboat.

82 thoughts on “Super Snark Sailboat”

I just bought my first sailboat, a 1972 Sea Snark. It has the ABS coating but is bubbling and cut in places. Is this something I will need to replace and cover with fiberglass or is there and easier way to eliminate the bubbling and fix the small cuts everywhere. Not opposed to the fiberglass and it will have a great finish – just don’t have any clue what it’d be doing. Doesn’t look terribly hard to do though. Thank you for any help.

P.S. This is a great forum, thank you very much for creating it. Lots of great help, ideas and information.

Am I the only person in the world to own Snark Mayflower??? Mine needs some minor hull repairs, but its a wonderful boat. I am “older” and cannot handle the heavier boats, so this boat is great for me. I am wondering if anyone has made a pvc trolley for a 90# (without rigging) boat? I am thinking something with a sling in the rear? I plan to use larger all plasitc wheels, but the design is making me nuts. In the past have used a prebuilt hand cart with wood handle extensions, but now I want the stern at the rear of the trolley and that is the problem….suggestions? Also, when you painted did you remove the rubrail and what was that like???

I Love this site! Thanks!

Marci, not sure if you are still out there, but my dad is trying to repair the hull on our Mayflower, which we’ve been sailing on a small pond for years. He is 86 now. Years ago it smashed against a tree (the wind picked it up) and snapped in half. He repaired it at the time, but over the years it has taken on water, with a particular crack around the centerboard well. This summer he removed part of the skin and patched some of the holes in the foam with sections he created from an old styrofoam beach board. He also plans to build up the well internally. Not sure when he’ll be able to finish. I miss it dearly! I’ve tried buying a new hull for him in the past but could never find any for sale.Happy sails to you.

I can’t help you, except to say that, yes, someone else once owned and enjoyed the Snark Mayflower from 1974-1978. I used to carry it on my back over the rocks at Folly Cove on Cape Ann, Massachusetts each time we wanted to sail. My wife is writing a memoir of an one hour Gilligan’s Island sail that four of us took across Ipswich Bay in gentle swells . By the time we reached Plum Island seven hours later, they had turned into 10 foot breakers. Yes, a wonderful boat, so sturdy for being only a piece of foam and plastic. I found your post because my wife didn’t believe it was called a Mayflower, and I had began to believe our little Mayflower never existed. Do you have any pix? Love to see one again.

I just acquired an old super snark – no sail, rudder or daggerboard. I got it to learn to sail. I had read that this was the way to go and I thought I got a great deal – $40. However, I am now concerned – the thing is a lot more than 50 lbs. it took my husband and I a lot of effort to lift and slide into our van. Someone suggested water issues? Could there be a heavier model out there?. This has some kind of coating over the styrofoam. any thoughts to help me figure out whether to invest more money into parts.

Today, I went to the beach front with my kids. I found a sea shell and gave it to my 4 year old daughter and said “You can hear the ocean if you put this to your ear.” She placed the shell to her ear and screamed. There was a hermit crab inside and it pinched her ear. She never wants to go back! LoL I know this is entirely off topic but I had to tell someone!

My web blog: Golf Star Hack Download ( Irwin )

Peter, there are some photos of the Snark Mayflower here. I am a writing coach—you can find me at my writing coach dot net if your wife needs any help with her memoir! We are not far from Plum Island and would love to hear the tale. http://photobucket.com/images/snark%20mayflower?page=1

Dear all, how nice to found you all in the www. My Sunflower hull is delaminating arround the dagger board. Does someone have ideas and experiance in how to fix this? Thank you so much. Daniela Is there a overview of serial-numbers available, that will tell the year of manufacture?

Last fall I saw a Sea Snark at a thrift shop and got it for $65. A small hole in the sail but serviceable. A busy spring / summer but finally got my chance to sail two days ago. Wow what a rush. I went out in 3 mile/hour wind and gradually increasing to 5. The wind was was fluky and changing direction and after 2 1/2 hours this old guy at 69 was bushed. Looking at videos and instructions for rigging the main sheet I could see many versions. I saw one photo with a traveller. I wondered about needing a hiking strap but wondered if the hull might crack in half. Reading here about a bow splash. My idea is to keep the boat light so I will not add anything slick to the styrofoam. I think I should graduate to a bigger boat for such niceties. Going sailing alone on this craft is the way to go and encourage others to club for racing. This Sea Snark and some lawn mower racing. Retirement is great. Thanks to all to you who have suggested repairs and improvements to this newbie.

Wow…happened to come across this site and am glad to have found it. I purchased a Snark back in 1972. It had been stored in my parent’s garage and now that I have a cottage on a lake, I am going to restore it. I need to replace the sail for mice have wrecked havoc to the old one. In 1972, I fiber-glassed the bottom and that needs to be repainted, will decide on a color once I decide on he sail. I need to do a little repair for a mouse nest in the bottom had caused some damage. I think I have all the parts. I am looking forward to reading the rest of the thread. Hard to believe it has been 42 years…

Snagged an older Snark from neighborhood group site (!) and been out three times so far – is great!

Two questions:

1) I want to fortify hull – Snark people suggested using 2 part epoxy, but NOT marine grade (will melt the styrofoam) – any suggestions on a decent, but reasonable option and how much it takes to do the whole hull?

2) The third time we went out, my son and I were going pretty fast but maybe because we were causing a bit of waves (?) the boat suddenly filled with water – less than a minute. Yikes! I had to bail like a madwoman (once the water is higher than the centerboard hole it is pretty hard!!). I need to make a splash guard – can you post a pic of the one you made? So many thanks!!

What do you do when you’re on the water, swilling and you need to put the sail down? I have a super Snark. The sail does not come down at all and in very windy conditions, this could be dangerous.

I am coming late to the party here, but just retired and am determined to get my “freebie” 1969(?) Mayflower in the water. I had to buy a new sail for it because the one on it was roached. Is there somewhere I can see a diagram to show this newbie how to properly rig this little boat? Thanks in advance!

I have found an excellent repair for styrofoam to the plastic hull. I fixed the centerboard trunk works excellent. It’s called 5200 from 3M, very messy but works great an won’t harm styrofoam. I got it at Home Depot, an it’s not cheap. $14.00 a tube.

I have a 11′ Snark Sunflower in my garage (it was left by the home’s previous owner). It looks in great shape, as if it rarely saw the water! If anyone has an interest in purchasing, please contact me. I’d be happy to send pictures to anyone interested. Alan 215.630.9508 Newtown, Pa

The sail should come down by loosening the halyard. Here is a video on proper assembly and you will see how the halyard line is used to raise and lower the sail: http://www.sailboatstogo.com/content/Super_Snark_Sailboat_Delivery_Assembly_and_Rigging

Super Snarks are being sold on SailboatsToGo.com here; http://www.sailboatstogo.com/content/Snark_Super_Snark_Sunflower__Sailboats

Here is a new video of my granddaughter sailing a Super Snark: https://youtu.be/JMfLjxqQTeg

This page has links to 3 videos of the larger Snark, the Sunchaser. http://www.sailboatstogo.com/content/Sunchaser_I_Snark

This page has the history of the brand: http://www.sailboatstogo.com/content/Snark_History

This gadget makes the mast taller so you get more headroom under the boom: http://www.sailboatstogo.com/catalog/PARTS/5211

I have a super snark. we stored it in a storage unit for a number of years. but my dad back in the 80s took 4 inch PVC and put two screw fittings on the ends and created a tube to protect the sail during transport and storage.

Hey! I just got a Snark Sea Skimmer off of craigslist for just a few dollars. The Hull is in pretty bad shape (lots of duct tape patches) and the deck has some cracking i’m sure from age. It is in one piece tho and all of the pieces parts are there. Any suggestions on where i should get started on repairing the Hull? Products, techniques?

Hello, I also just purchased a Super Snark and have repaired the hull, a few dents and cracks with PC-11. Going to sand it a bit and then paint it. The original color is red but I may want to change it. Just wondering how the Krylon Fusion paint held up. I also think the Navy blue would be beautiful! Enjoying learning from fellow sailors! Thanks

Hey all –

I just did a Super Snark restoration in August and September. There is a yahoo user’s group for Snark sailboat owners which is active and helpful.

I have a photo album there showing my restoration from a hull that sat in the weeds for years to a fun and portable sailboat. Good luck!

I used Krylon fusion on my Snark and it worked great!

Hey I was wondering all the dimensions of the Rudder and dragger Board? I received a super snark in excellent condition for free. it just doesn’t have mast sail dragger board or rudder and I plan on making most of it my self any help or suggestions will be appreciated! New to sailing so be easy on me! Thanks again! Devin

I’m about to buy a very old snark, the unclad Kool cigarette version. Has anyone had any problems with these, as far as the hull breaking or getting waterlogged, etc.? Thanks!

Does anyone know what happen to the Snark Sailboat Owners Yahoo Group? I just bought a Sunflower. I have joined, but being a restricted group, its been more than a week and I have not heard back. I also tried to go to the group website and it is not working. (www.wisdomsecurity.com). What I wanted to know is: Has anyone set up a jib on a Sunflower? How did it work? How it was done? Thanks.

I have a 1972 Kool Snark. Smoked Kools to have required cartons and $99.00 to buy it. We did an amateur fiberglass job on it in 1972 but it has served the family well on lake and beach adventures. Would like to sell it. Any takers?Contact cbrittain47 @carolina.rr.com

What a treasure trove of information!

First of all, if anyone knows of a Snark Mayflower for sale in the eastern half of the US, please contact me. I will come and buy it.

Second, yes, the Snark Mayflower did exist. They discontinued them in…maybe 1979? Or in the 1980s?

My Uncle bought one in the late 1970s and had it at his lake cabin in Minnesota. I learned to sail on it in the late 1980s. I sailed it off and on for years when I was up there in the summer. It was a wonderful boat, simple to sail, and basically impossible to capsize. I sailed it one time for the first time in like 10 years in 2011. I have a blog post about it here: http://craigsteffen.net/blog/2011/07/2011_07_18_23_21_50_A.php Not a year after that, possibly that summer, it was apparently beyond repair and my uncle cut it up and threw it away.

The Mayflower hull (and some of the other Snark boats too) is a styrafoam core with a plastic outer shell. Having talked to people, apparently it’s generally fine if you keep it indoors when it’s not on the water. If you leave it outside all the time, however, the plastic will eventually develop cracks and let water in. My uncle had repaired it with fiberglass several times but finally just couldn’t keep up with it. When it cut it apart water poured out of the voids in the hull.

There is, by the by, a supplier in Europe that sells them. The Snark supplier in the US says that they will not ship them to the US, and the company is uninterested in resurrecting the design.

I would love to make one myself. There are drawings around. I could almost do it with photos and dimensions memory. I think cutting the shape out of styrafoam wouldn’t be too terribly hard; I’d then have to figure out how to make the hard outer shell. Fiberglass? Maybe carbon fiber is cheap enough nowadays?

If you’re looking for information on it, here’s a great resource: http://www.castlecraft.com/snark_assembly.htm It’s a collection of Snark product assembly manuals. It includes discontinued products like the Mayflower: http://www.castlecraft.com/PDF/Snark-Mayflower-Manual.pdf

Craig Steffen [email protected] 217-979-2392

I have a 1972 Sea Snark for sale. It’s in great condition & only used 4 times since refiberglassed. It’s to heavy for top of my new car

Just acquired a snark mayflower for 40 bucks. Out of the shark models, I have struggles to find much for any info on the mayflower specifically…anyone else own one?? The ABS had gouges and cracks that we have been working to repair. Where the rubber molding strip attaches, there is silicone or similar product that was used to seal the seam and it’s a real bear to remove. Anyone have any suggestions on what we can use to make it easier that will be safe to the foam and ABS? Think we could just cut a 2in strip off all the way around on both the inside and outside ABS peices and use fiberglass cloth or something to replace that area? I appreciate any input. Thanks.

Anyone tried fitting a 55 f sail (with adj to mast etc) to the supersnark? Any info on this? Stability?

Hi John G – I was wondering the same thing! I’ve just come upon one of the ABS-clad supersnarks and was curious about sail surface area upgrades. Are you still around, and did you try anything with any success?

I just purchased a 1989 super snark and am painting and restoring. Bought a beautiful new sail from sailboatstogo. will sail and post pics next week when I can figure out how to post them

Leave a Reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Sea Snark (Super Snark)

Sea Snark (Super Snark) is a 10 ′ 11 ″ / 3.4 m monohull sailboat built by Snark Sailboats (Meyers Boat Co.), Cleatline Boats, and CastleCraft starting in 1958.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Early SNARKs were one of the most popular sailing boats ever. This is partly due to the fact that they could be purchased with ‘product coupons’. For example, a large number of Kool cigarette coupons could be redeemed for a SNARK with the Kool logo on the sail. It was also possible to purchase a SNARK with the KOOL logo (without smoking a single cigarette) for $99. The Kool ad campaign reportedly received 18000 SEA SNARK orders in 1971 alone! Most later SNARK’s are made of styrofoam with an outer layer of ABS for improved durability. (Although the boats that were part of ad campaigns were usually built of styrofoam without the ABS shell.)

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

• Forums New posts Unanswered threads Register Top Posts Email
• What's new New posts New Posts (legacy) Latest activity New media
• Media New media New comments
• Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
• Classifieds Sell Your Boat Used Gear for Sale
• Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
• Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe
• Thread starter aaronpw
• Start date Sep 22, 2011
• Forums for All Owners
• Ask All Sailors

I have a 1976 Snark built for Sears. The boat is in great shape. I am missing the mast and some rigging instructions. The boom has a fork at the front with a single eye through bolt i presume is for either the downhaul hook on the mainsail or, a location to secure the front of the boom to the mast. It has an fairlead eye about two feet back which I beleiev is for a vang to the foot of the mast which has a ring with a tab through which an s hook would fit. I need some help on the mast length. The pocket luff of the main is 162" (13' 1/2"). I dont know how much mast is necessary below this point. Any assitance is appriciated.  

Attachments

I know it might sound crazy but check sears parts. They have the different snarks listed. Maybe they still have parts.  

They have some but not all. My issue at this time (I can buy 20' lengths of T6 aluminum at the proper diameter) I just need the specifics on the rigging.  

I googled "snark sailboat" and found a ton of resources. Pictures, manufacturers, dealers and parts sources. Since it's latteen rigged, you just need a pole that will fit into the mounting hole and is high enough to hold the boom/gaff rig. It can't be any simpler.  

I owner one in 1970. I remembe the mast being about 6 1/2 feet tall. Bob  

Snark Parts The first sailboat I purchased was a 1976 Snark Mach II. Got it from new from Sears like you say. When I turtled and lost the mast (long story and the first of many lessons learned about sailing) I bought a mast from a guy who was parting out his sunfish. Used that until the late 80's. My Mach II was a bit bigger than yours so maybe a mini-fish might be a more appropriate source. And definately try Sears. I had a 1971 Ted Williams (Sears) outboard that needed a magneto. Turns out it is a Tecumsah engine and parts are standard. Good Luck. DH  

This Snark was called a Fireflower and was not a lateen rig but a single mainsail (sleeved) with a forked nose boom. It appears that the boom is rigged for a vang ( a simple 1:1 with a bullseye fairlead on the boom, down to a tang on the mast foot, back to a cleat on the boom behind the fairlead.). The luff in the sail is 182" so my problem is I dont know how much "more" mast I need. I think the downhaul will be a simple single line using a fairlead mounted on one side of the mast, up through the tack and back down to a jam cleat on the other side of the mast. Its hard to find detail pictures of any mast rigged like this for comparison.  

Try this link: http://www.sailritesails.com/ShowAd.aspx?id=4403&SourceID= 0 &BoatName=FIREFLOWER  

Does anyone know ifthe swivle bracket at the base of the mast pocket is for a vang or a retainer for the DB?  

Try this link: http://www.castlecraft.org/sailboats.htm Then go to this one and check out the pic on page 5: http://www.castlecraft.org/PDF/Snark Sailboat Brochure.pdf Looks like your boat is a Sunchaser II although there doesn't seem to be a difference in hulls between the I & II.  

Then try here: http://www.castlecraft.org/sunchaser_two_parts.htm  

Bill Murray

Join this group ( http://groups.yahoo.com/group/snarksailboat/ ) and get lots of info -- including how the rig works. Mine had a short mast PLUS a modified "lateen" rig - sort of. The sail had a boom and a two part "mast" that telescoped inside a sleeve sewn into the luff of the sail. When you raised the halyard it caused the tescoping "mast" to extend until the sail was taught and vertical. Sounds weird but it was simple and worked pretty well.  

Twice Around

Do you need a vang on this boat? It might be a mast retainer so if you flip over the rig won't fall out.  

Twice Around said: Do you need a vang on this boat? It might be a mast retainer so if you flip over the rig won't fall out. Click to expand

my snark has a latin rig, and two ropes, one holds the mast down and acts as a down haul and come from the boom to a cleat rigth next to the hole in the woden board where the mast is set , the other one is the main sheet, it goes from the boom to your hand!  

Not a lateen rig My Snark has a sleeved mainsail. It does have the cleat on top of the board that makes up the mast step. I assume this was for either downhaul or to secure the mast.  

The fairlead I am seeing is almost over the top of the dagger board slot, probably to far aft for a vang of any type...correct?  

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

Moscow Muled

Best virgin moscow mule recipe.

Nov 30, 2019

Wherever there are great cocktail recipes, there are equally fabulous mocktail recipes for those of us who enjoy all the style and taste of cocktails without liquor. In this post, we reveal the best recipe for the Virgin Moscow Mule on the internet! Let's get started!

Introduction

A cocktail is essentially a blend of two or more ingredients of which at least one is alcoholic. As of late, cocktails are getting more inventive with upwards of four and five ingredients.

The Moscow Mule keeps it classically simple with only three ingredients that most of us already have at home. Vodka, ginger beer, and lime juice.

The intense burn of the ginger beer blended with the refreshing sourness of lime juice delights the palate and warms you right up from the first sip.

There are a multitude of practical reasons for choosing a mocktail over a cocktail.

This could include health concerns and diet practices. Or, maybe you're the designated driver and don't want to miss out on a fun night with your social group.

Whatever the reason, mocktails make sure no one is left out.

Most will say that a mocktail is simply a recipe for any cocktail sans the alcoholic ingredient(s), but we're going to show you fantastic ways to enjoy a Virgin Moscow Mule without sacrificing flavor or taste.

Ingredients:

• Sparkling Water 
• Fresh limes 
• Ginger beer 
• Simple syrup

Instructions:

• You can either muddle a couple of fresh limes or use freshly squeezed lime juice. We won't tell if you decide to do both ;)
• Next, combine your favorite sparkling water and a splash of ginger beer
• Add a serving of simple syrup (1 part water, 1 part sugar)
• Stir. If you have a shaker on hand, you can also shake the combined ingredients together, but be cautious when pouring as the turbulence may have created a little extra fizz from the sparkling water.
• Pour over ice

With this excellent non-alcoholic version of the Moscow Mule, you can have guilt-free seconds or even thirds!

Health Benefits

Typically, in every 6 oz serving of the traditional Moscow Mule cocktail there are approximately 180 to 200 calories.

One fantastic upside of making a Moscow Mule mocktail is that with the extraction of vodka (say 1.5 oz) you can eliminate around 96 calories, meaning that a typical 6 oz serving is approximately 100 calories or less!

Layers of Flavors

Now that we've laid the foundations, it's time to explore the variations and wonderful layers we can add to perfect our Virgin Moscow Mule.  With these alterations, your mocktails are sure to be enjoyed by all!

In addition to following the preparation of the basic recipe noted above, we suggest adding a few slices of fresh ginger to the mix.

To fully extract the flavors of the ginger, consider muddling it with your limes. Be careful to strain afterward, unless you want to be sucking up bits of ginger through your straw and set your mouth ablaze!

Coupled with the ginger beer, this is sure to amplify the smoldering tones of the original cocktail's taste.

Be sure to use ginger beer and not ginger ale. Most commercially sold ginger beer, though fermented, is alcohol-free. It differs from ginger ale in the way it is manufactured. The intensity of ginger essence in ginger ale isn’t comparable to that of the essence in ginger beer.

So, if you decide to replace ginger beer with ginger ale, you’ll be disappointed at the silenced flavors of ginger in your drink. Essentially, what you’d be drinking wouldn’t be a Moscow Mule at all.

Take it from us, use ginger beer!

If you would rather direct your variations or additions towards the sweet and fruity citrus flavors of your Virgin Mule, you can switch out the simple syrup for a fruit-flavored syrup.

Use a lime-flavored syrup if you would like to stay true to the original characteristics of the classic Moscow Mule.

If you're looking to put a spin on your virgin mule, don't be afraid to try any berry-flavored syrup for an extra layer of fruity goodness.

Sugar-Free Options

Not everyone is a fan of sugar and all things sweet. With this modification, the recipe can accommodate those of us who are patrolling our sugar intake due to dieting and/or health concerns.

More specifically, if you're counting calories or looking to steer clear of sugar all together, you can modify the Virgin Mule recipe by using sugar-free syrup. 

With 8 grams of sugar in one tablespoon of conventional syrup, the sugar-free option is a great way to go. A couple of dollops of the sugar-free syrup is a guilt-free way to enjoy the sweetness of this mocktail without the guilt.

Depending on your location and accessibility, you may or may not find brands of sugar-free syrup.  All the merrier if you can!

If you can’t find sugar-free syrup, another option is to use flavored sparkling water to add some additional flavour to your mocktail.  Some brands of flavored sparkling water are sold in tasty flavors with no sugar, no sweeteners, and no calories. Furthermore, the carbonation in sparkling water will augment the invigorating fizz of the ginger beer.  Win-win-win!

Serving Time

Just because we've decided to forego the alcohol component doesn't mean we're also forsaking presentation. We 're all about balance in life as well as in mocktails. So, if one component of the drink has been removed, another must be added!

And what better place to embellish then in the presentation?

It's no secret that the Moscow Mule is served in a copper mug . There are a variety of reasons why, and one of them is that copper is trusted to maintain a cooler temperature. In addition, the copper adds a "zing" to the flavor of the cocktail with each sip.

Whatever the reason, we can't deny that a Moscow Mule served in a copper mug just looks and feels right. The same is to be said for a Virgin Mule.

Besides, if we’re talking about looks, no one has to know you’re drinking a mocktail if you don’t want them to. The copper mug will keep your secret!

In lieu of serving your Virgin Mule in a copper mug, you can serve it in any bar glass. With so many types and shapes of cocktail glasses, there really is no reason why you couldn't enjoy your mocktail in a highball, an old fashion glass, or even a martini glass.

Whatever you have on hand should work just fine!

Garnish Like a Pro

Add a lime wedge to the rim and voila!

Want to take things up a notch? Drag the lime wedge along the rim of your glass, allowing the citrus to coat the edge. Turn your glass upside down into a plate of salt or sugar.

Extra points for presentation and added flavor with every sip!

For herb garnishes, clap your choice of herbs between your hands to bruise it lightly and release its essential oils and aroma.  Mint works great!

And here's an extra tip. If you have them, sprinkle a few pomegranate seeds on the surface of your drink! However, be careful if drinking with a straw as those little seeds will get sucked right up! It’s also a beautiful addition to your Virgin Mule, as you can see in the photo below.

We hope this article has been useful in helping to introduce you to the Virgin Moscow Mule! The Moscow Mule is an incredibly versatile drink, so don't hesitate to let your creativity push you to experiment with new variations. And, if you want to take your presentation and style up a notch, make sure to equip your kitchen bar with a few copper mugs !

Did You Enjoy This Article?

Thank you for reading! If you enjoyed this article, you might also like the following articles:  Top 7 Tennessee Mule Recipes and  Top 6 Gin-Gin and Gin Mule Recipes

Relevant Products

Moscow Mule Copper Mug

Leave a comment

Subscribe to our newsletter.

Receive exclusive deals and our latest blog posts straight to your inbox!

• Seacycle 
• Spring Creek

Popular Options

The Sunchaser I and the Sunchaser II share the same hull.  Sail rigs are interchangeable.

Click Here for Parts for Sunchaser I

Sunchaser  on the Water Video       

Sunchaser Sailboat Voyage  Video (This shows an earlier version of the Sunchaser Sailboat in this video)

Sail and hull colors may vary from those depicted in photographs.  All equipment, specifications and materials may change without prior notice.

• Canoe Sailing
• Kayak Sailing
• Dinghy Sailing
• Snark Car-Topping Sailboats
• Canoe Stabilizers (Outriggers)
• Rowboat & Porta-Bote Sailing
• Parts and Accessories
• Boats (without sail rigs)
• Motor Mounts
• Portage Carts
• Small Outboards
• Specialty Boats
• Shopping Guide
• Testimonials

Snark Sunchaser II Sailboat

Note:  As of March 2021, no Snarks are avalable and there is no timetable for when they will be.   We have one used Sunchaser 1 available.

The Snark Sunchaser II is lightweight (125 pounds), roomy (4 people, 900 lbs) and fast  (100 Sq. Ft. of Sail area between an 80 SF main sail and a 20 SF jib).   Add an electric trolling motor if you want auxiliary power.   This is a long page, with pictures and videos, so please scroll down.  Don't miss the videos on lower part of this page and on another page, the photo-illustrated owner report on the Sunchaser II from "Walt, " who has a very old one and can testify to their longevity.   Download Sunchaser II manual:   Here

The Sunchaser II can be ordered online on by telephone and will be delivered by a freight carrier, right to your door.  You can call or email for a shipping quote (depends on zip code, generally $600 - 900).  Or place your order now, pay $600 toward the shipping,  and we'll contact you about adjusting the shipping charge.  Usually arives in about 2 weeks.   Toll free in US:  1-888-Joy-Sail (eastern time zone) or worldwide 978 263 7598.   Email [email protected] .     

More info,  or To Buy :  Click Here    Price is $5799 plus shipping.  

*($600 shipping will be charged initially as a placeholder but your final cost could be more or less than this.  The shipping charge will be adjusted later,  with your permission, once actual shipping cost is known).

Bonus offer  -  2 lifejackets, just for putting the word "Bonus" in the comment space when you check out.  Or if you prefer, choose this bag to protect you sail and spars for car topping and storage as your bonus instead.

We also offer the Sunchaser I , which has just one sail, so it costs less and sets up more quickly. But it's not as fast. Same hull.

Max. Motor Power - 5 HP or any size electric  trolling motor.  We recommend against gas motors because gas spills could damage the hull if not wiped off right away.

Terms:  Not returnable.    Defects covered by  manufacturer's warranty. Delivery dates are estimates only. Inspect before accepting delivery and refuse a damaged boat.

  Note:  Snark has eliminated the dagger board plug in current design, though it is still listed in instructions. 

T his owner video gets better and better as it continues, so don't jump ship early!  (click arrow in center of image).

Roof Racks   Click Here    See carrier bar with telescoping extension to make it much easier getting your Snark on and off the car roof without damage to you, it or your car.

Here's another - sailing with just the main sail (jib not being used):

Trailer for Canoe, Kayak or Small Boat - FREE Shipping!

Model SUT-250-S is best for Sunchasers

Owner video 3:

Owner video 4

For other models click each name:

  Super Snark , Sunflower ,     Sea Skimmer   ,   Sunchaser I