Yachting Monthly
- Digital edition
Best boat fenders: 7 of the best options for protecting your topsides
- Phil Sampson
- November 16, 2022
We take a look at 7 of the best boat fenders on the market right now, which are available in various shapes and sizes
Doubling up your fenders can create a useful step
If ever there was an unsung hero in the world of boating, it surely has to be the humble fender. Ubiquitous and largely maintenance-free, fenders dangle fearlessly in the face of adversity, protecting the valuable and vulnerable hulls of their owners from miscalculations at the helm and the wayward actions of other boaters alike.
It follows, therefore, that fenders should not be regarded simply as ‘fit and forget’ items, but as integral safety components with the potential to protect against substantial damage-repair costs.
Consequently, it’s well worth reviewing the complement of fenders attached to your boat and asking questions such as: are they the right type and size? Do I have enough of them? Are they in a serviceable condition?
What to look for in a good set of boat fenders
In terms of type, side-hull fenders are most commonly cylindrical, ball or flat/cushion, while bows and transoms can be protected with shaped fenders made specifically for purpose. A commonly used sizing guide for cylindrical fenders advises between 25-50 millimetres diameter for every 1-1.5 metres of boat length.
The length of the fender itself will depend on the freeboard of the boat to which it is attached. A minimum of three fenders per side is recommended, with at least one placed every 3 metres along the length of the boat. A ball fender at the bow not only guards the sharp end from collisions but also comes in handy as a rover or when springing off pontoons .
Always ensure your fenders are pumped up to the correct pressure – generally between 0.15 and 0.2 bar – and show them some love by cleaning them regularly. That way, they will give you many years of service in return.
And lastly, if you’re too posh to pull, why not try an automatic fender system ?
Here’s our pick of the best boat fenders on the market today.
Best boat fenders available right now
Polyform G series boat fenders
Available in six sizes to accommodate boats from sub-10 feet to up to 40 feet in length, the Polyform G Series is a high quality, good looking product boasting an even wall thickness for strength and durability.
Moulded-in ribs add to the strength while also providing protection against abrasion. Manufactured from vinyl and available in no less than 16 colours, Polyform fenders have a unique valve designed to give many years of trouble-free service.
All G Series fenders have an eye at either end so they can be vertically or horizontally mounted.
Price: £14-99 – £157.43
Buy it now Amazon (UK)
Note: We may earn a commission when you buy through links on our site, at no extra cost to you. This doesn’t affect our editorial independence.
Majoni white/blue boat fenders, set of four
Our pick here is a bundle of four size 2 (15 x 56 cm) Majoni fenders. Described as being ideal for boats from 19-22 feet in length and supplied ready inflated, the deal listed below includes a complimentary set of fender ropes.
That means each fender and its rope comes in at less than £15 each, which we reckon represents good value by any measure.
The styling – a white body tipped with blue at either end – is a long-time boater’s favourite which adds a splash of colour to a fender set which might otherwise look a touch drab, especially after a season or two’s use.
Price: £57.49
Ocean Series R round fender
Ocean’s Series R round fenders are heavy duty units, and as such are much favoured by commercial fishermen as well as recreational boaters. Available in a selection of eight sizes from R0 (22 x 30 cm) to R7 (100 x 138 cm), Ocean’s Series R caters for boats from 3 to 24 metres.
All Series R fenders have a rib-reinforced eye to ensure ropes are held securely and safely over the long term. The buoy’s one-piece construction, consistent wall thickness and UV resistance all add strength and durability to this well designed product.
And if white with a blue tip doesn’t take your fancy, R Series buoys are also available in red tipped with dark blue.
Price: £20.25
Buy it now on eBay
Anchor Marine standard fenders
Anchor Marine has been manufacturing fenders in the UK for more than half a century. Moulded in UV-resistant PVC and available in 12 colours in addition to base white, the company’s standard boat fenders are popular among commercial and leisure users.
Ruggedly constructed with a high resistance to bursting – due to what Anchor Marine describes as its ‘class leading wall thickness’ – each fender has an eye at either end to allow horizontal or vertical attachment to the boat.
Fitted with valves for easy inflation and deflation, all Anchor Marine standard fenders have hard thimble eyes to reinforce rope securing points.
Price: £7.95 – £49.95
Buy it now on Marine Superstore
Anchor Marine transom fender
Our second featured product from Anchor Marine are these transom fenders, which have been designed to give protection to any boat with a vulnerable transom or bathing platform. And if you’d rather not fit them to your boat, they can just as easily be mounted to the exposed corners of a marina berth or finger pontoon instead.
Supplied with two mounting strips and offered in four colours – white, royal blue, black and navy – these fenders measure 13 x 10 x 10 cm and weigh in at just under a kilogramme. Built to the same high standards as all other Anchor Marine products, these transom fenders could well pay for themselves in single bump!
Price: £27.99
Buy it now on Marine Scene
Flat/cushion fenders
The obvious advantage of flat or cushion fenders is that they will not puncture or deflate, meaning 24/7 protection is provided regardless of whether the owner is on hand to keep a watch on them.
Our pick here is Force 4 Chandlery ‘s own-brand flat/cushion fender. Available in two sizes – 41 x 21 x 5 cm and 55 x 29 x 7 cm – these blue and white semi-rigid fenders are manufactured from tough PU closed-cell foam which will not absorb water.
Being flat, they are also easy to stow and, as Force 4 helpfully points out, double up as cockpit cushions or kneeling pads when not in use protecting the boat.
Price: From £27.95
Buy it now on Force4
Talamex bow fender
Talamex Marine Products is the house brand of the Yachting Division of Netherlands-based distributor, Lankhorst Taselaar/Hohorst. As such, a wide range of quality marine equipment and fittings are marketed under the Talamex name, including the bow fender we have selected here.
The attraction of this three-eye horseshoe-shaped unit is that it is billed as a one-size product and thus should be suitable for a variety of boats and hull types. Anyone who has ever bashed their bow into a pontoon will certainly appreciate the benefits a bow fender can offer!
Price: £25.49
Buy it now on Amazon (UK)
Handcrafting quality marine products since 1986
Extraordinary style in function for the discerning yachtsman.
CONTACT US FOR SUMMER SPECIAL PRICE FOR ALL FENDERS!!
Megafend products make yacht mooring safe and protected. No one does it better! We lead the industry with exceptional custom handcrafted mooring accessories fulfilling the on-going statement of "I wish someone would make...." While others try and play catch-up, we continue to innovate with exclusive carbon fiber core in a variety of products, maintenance-free leathers, 316 stainless-steel patented hardware and so much more.
We listen, we visualize, we create. Even now we are redefining inflatable fenders with tougher, stronger new-gen materials and welded seams. We do it all in-house for ultimate control and no-compromise extreme quality. Integrity is our commitment, our gear performance is guaranteed.
By the way, our gear also adds an elegant look to compliment your vessel!
Read Customer Testimonials
Online ordering, continental U.S. only. International Customers , please call Megafend and mention our website, in order to receive 25% off of your order!
Global Message
Please verify you are a human
Access to this page has been denied because we believe you are using automation tools to browse the website.
This may happen as a result of the following:
- Javascript is disabled or blocked by an extension (ad blockers for example)
- Your browser does not support cookies
Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.
Reference ID: 3102d387-e697-11ee-b796-e7d010749b84
Powered by PerimeterX , Inc.
- Fenders for Boats: A Comprehensive Guide to Marine Fendering
When it comes to protecting boats from damage caused by impact with docks, other vessels, or even natural elements, marine fenders play a vital role. Fenders act as a cushion, absorbing the shock and preventing potential harm to boats. In this article, we will delve into the world of boat fenders, exploring their different types, their importance, and how to choose the right fenders for your watercraft.
1. Understanding Fenders for Boats
Boat fenders, also known as marine fenders, are essential accessories designed to safeguard boats and docks from damage. These protective devices create a buffer zone, preventing any hard contact that could lead to scrapes, dents, or more serious structural harm. Fenders are often made from materials like rubber, foam, or plastic, each offering specific advantages such as durability and resistance to UV rays.
2. Types of Boat Fenders
There are various types of boat fenders available in the market, each catering to specific needs. Some common fender types include:
2.1. Cylindrical Fenders
Cylindrical fenders are the most basic and widely used type. They come in different sizes and are suitable for various boat types. Their versatile design allows them to be installed both horizontally and vertically. Cylindrical fenders are particularly effective for boats that have a straightforward hull design.
2.2. D-shaped Fenders
As the name suggests, D-shaped fenders have a flat surface on one side, making them ideal for protecting flat areas on boats, such as gunwales and hull sides. They can be easily attached to the boat's surface, and their unique shape provides excellent protection against impact.
2.3. Cone Fenders
Cone fenders are highly effective in absorbing large amounts of energy, making them suitable for heavy-duty applications and areas with high berthing energy. The conical shape allows them to distribute pressure evenly, reducing the stress on the boat's hull during docking.
2.4. Arch Fenders
Arch fenders are designed to distribute pressure evenly, making them perfect for vessels with a delicate hull or where mounting space is limited. They are commonly used on piers, quays, and other structures where the boat may come into contact with protruding edges.
2.5. Pneumatic Fenders
Pneumatic fenders, also known as inflatable fenders, provide excellent protection and are commonly used for larger vessels and in ship-to-ship transfers. These fenders can be easily inflated and deflated, making them convenient for storage and transport.
3. Selecting the Right Boat Fenders
Choosing the right boat fenders is crucial to ensure proper protection and avoid potential damage. Several factors should be considered when selecting fenders for your boat:
3.1. Boat Size
The size of your boat plays a significant role in determining the size and quantity of fenders required. Larger vessels typically need more substantial fenders to provide adequate protection. Additionally, the boat's weight and draft should be taken into account when choosing fenders.
3.2. Berthing Conditions
Evaluate the berthing conditions of your usual docking area. Understanding the water currents, tidal fluctuations, and the type of dock or pier will help in choosing fenders with the appropriate strength and durability. For areas with rough waters or high berthing energy, stronger and more resilient fenders are recommended.
3.3. Type of Vessel
Different types of vessels may require specific fenders based on their design and structure. For example, powerboats and sailboats might benefit from different fender types. Consider the boat's shape and contact points to select the fenders that will offer the best protection.
3.4. Fender Material
Fenders are made from various materials, each with its own set of advantages. Rubber fenders are popular for their durability and resistance to abrasion. Foam fenders are lightweight and easy to handle. Plastic fenders, on the other hand, are resistant to punctures and UV rays. Consider the specific needs of your boat and the prevailing weather conditions to choose the most suitable fender material.
Read our top notch articles on topics such as sailing , sailing tips and destinations in our Magazine .
4. Installing Boat Fenders
Proper installation of boat fenders is essential to ensure maximum protection. Follow these steps for correct fender installation:
4.1. Positioning
Place the fenders at the right height to match the dock or other vessel's contact points. Proper positioning is crucial for effective protection against impact. Ensure that the fenders are neither too high nor too low, and secure them firmly using appropriate fender lines or ropes.
4.2. Spacing
Determine the optimal spacing between fenders to cover the boat's vulnerable areas effectively. Spacing may vary depending on the fender type and boat size. The goal is to create a continuous buffer zone along the boat's sides and critical points of contact.
4.3. Adjustability
Make sure the fenders can be easily adjusted to accommodate changes in water levels or berthing conditions. Tidal fluctuations or changes in the water level may require fender adjustment to maintain effective protection.
4.4. Regular Inspection
Inspect the fenders regularly for signs of wear and tear. Fenders exposed to harsh conditions, such as extreme temperatures or strong UV rays, may deteriorate over time. Replace any damaged or heavily worn fenders to ensure continuous protection.
5. Maintenance and Care
To prolong the life of your boat fenders and maintain their effectiveness, follow these maintenance tips:
5.1. Regular Inspections
Check fenders at least once a month for signs of wear and tear, and inspect them after any significant impact or harsh weather conditions. Regular inspections allow you to identify any issues early on and take appropriate action.
5.2. Cleaning
Clean fenders periodically to remove dirt, salt, and grime, which can degrade the fender material over time. Use mild soap and water to clean the fenders and avoid using harsh chemicals that may damage the fender's surface.
5.3. Proper Storage
Store fenders in a dry and cool place when not in use, protecting them from harsh weather conditions. If the fenders are inflatable, ensure they are properly deflated and folded for compact storage.
Marine fenders are essential accessories for any boat owner, providing the necessary protection against potential damage during docking and berthing. By understanding the different types of fenders available and following the guidelines for selection, installation, and maintenance, boat owners can ensure their vessels remain safe and in excellent condition for years to come.
So what are you waiting for ? Take a look at our range of charter boats and head to some of our favourite sailing destinations .
FAQs about boat fenders
A Guide to Yacht Fender Systems
- by yachtman
- September 18, 2023 August 26, 2023
Yacht fender systems are must-haves for any yacht owner . They protect from potential damage and scratches. Let’s explore the types and their benefits.
Inflatable fenders are popular. They’re easy to store and use. Simply inflate and deflate as needed.
Foam-filled fenders are durable and resist punctures.
Fenders can add style and elegance to your vessel . Many manufacturers offer customizable options. Find a fender that complements your yacht perfectly – classic or modern.
Don’t miss out on investing in a fender system. It’s crucial for the longevity of your yacht. Preventable damage can diminish beauty and value. Secure peace of mind with a top-of-the-line yacht fender system !
What are yacht fenders?
Yacht fenders are crucial tools that protect yachts from harm while docking or mooring. Let’s break down what yacht fenders are and why they are essential.
- Yacht fenders are cushion-like devices made of rubber or PVC.
- They are attached to the sides of the yacht as a barrier between it and the dock or other vessels.
- Their main goal is to absorb impact and prevent damage from collisions or rubbing.
- The size and shape of yacht fenders vary depending on the yacht, plus personal preferences.
- Yacht fenders come in cylindrical, spherical, or flat designs, each offering unique benefits for docking.
Also, certain factors must be considered when picking and using yacht fenders.
- Assess the weight and length of your yacht to pick the right-sized fenders.
- Place and adjust the fenders properly along the hull for cushioning during docking.
Lastly, inspect and maintain the fenders regularly to extend their life and keep them functioning.
Fortunately, there are tips to optimize your yacht fender system.
- Choose high-quality materials for durability and resilience.
- Have a range of sizes and types of fenders aboard for flexibility.
Also, use accessories like covers or straps to secure and protect the fenders from any weather or sudden movement.
Different types of yacht fender systems
Picture a yacht sliding through the water, guarded by a fender system – just like ancient warriors’ body armor. Let’s check out the different types of yacht fender systems for smooth sailing.
Or pick specialty fenders for megayachts or sailboats. These provide extended length or shaped contours to fit unique vessels.
To get the best from your fender system, do these things:
- Get the right size and place them well.
- Check for wear and damage regularly. Replace if needed.
- Choose adjustable or modular fenders. You can tailor protection to different docking scenarios.
Choose an appropriate fender system for your yacht. It’ll give you a safe voyage and keep your vessel looking great.
Choosing the right fender system for your yacht
For an informed decision, you must assess your yacht’s size, weight, and docking conditions. Smaller yachts call for lightweight, compact fenders. Whereas larger vessels require bigger, sturdier options. Moreover, consider the type of dock you usually visit – fixed or floating – to decide the proper fender design.
Material matters too! Vinyl provides excellent durability but may not be ideal for choppy waters. Polyurethane is a good blend of strength and flexibility. As for rubber, it absorbs shocks well, yet it tends to deteriorate quicker.
Shape is essential too. Cylindrical fenders are ideal for yachts as they roll against the hull with changing tides or waves. Still, there are other choices like spherical or flat fenders that may fit certain docking situations better.
Yacht fenders have come a long way. From tires and canvas sacks filled with straw or hay – to modern, specifically designed fenders. To ensure optimal protection and ease of use, you must find the perfect balance among size, weight, docking conditions, material, and shape. Then, your yacht will be safe and you can have worry-free voyages.
Installing and maintaining yacht fenders
- Choose the right fender size and type for your yacht, considering its dimensions and weight.
- Secure it with ropes or straps.
- Place the fender at the right height and angle to absorb impacts.
- Inspect them often and replace if needed.
- Clean fenders with mild soap and water.
- Store them in a cool and dry place when not in use.
- Also, inflatable fenders must be inflated to the pressure recommended by the manufacturer.
- For added protection, use dock lines or dock bumpers along with the fenders.
- Following these steps will protect your yacht and preserve its looks on the water.
Tips for maximizing fender system effectiveness
Maximizing the effectiveness of your yacht fender system is key for protecting your vessel from harm. Here are some helpful tips to achieve peak performance:
- Pick the right size and type of fenders for your yacht. Think about the weight, size, and docking conditions to find the best option.
- Place the fenders correctly. Put them at points where contact with docks, other boats, or structures could happen.
- Regularly check the fenders for wear and tear. Change out any worn-out or damaged ones promptly to keep their efficiency.
- Adapt your fender setup based on tides, water levels, or weather to guarantee effective protection at all times.
- Use a mix of soft and hard fenders to evenly distribute impact forces and provide efficient cushioning in different situations.
- Invest in high-grade fenders made from materials like marine-grade vinyl or rubber for long-lasting performance.
In addition, there are a few extra details to consider. For instance, when dealing with yachts with heavier hulls, it’s recommended to use bigger cylindrical fenders. This will give better protection against impacts.
To further enhance the effectiveness of your fender system, here are some more ideas:
- Don’t tie off the fender lines too tightly, as this weakens their shock absorption capabilities. Leave some slack while still making sure they’re secure.
- Inflate the fenders adequately, but don’t over-inflate them. This can reduce their shock absorption and decrease their effectiveness.
By following these tips, you will maximize the effectiveness of your yacht’s fender system. Choosing the right sizes and types of fenders, positioning them correctly, regular inspection and maintenance, adapting to changing conditions, using a mix of fender types, and getting high-quality materials will all contribute to optimum protection for your vessel.
A yacht fender system is a must-have for protecting the vessel’s exterior. A well-designed, accurate-fitting fender system not only guards against damage but also upgrades its look.
When choosing a fender system for your yacht, take into account measurements, shape, material, and attachment approach. The size and shape must be in sync with the yacht’s measurements for ideal protection. Moreover, the material should be strong enough to withstand contact with various docking structures.
Moreover, the attachment method is equally important. Pick a system that allows for straightforward installation and modification for different docking situations.
Maintenance is also key. Regularly inspect and clean the fender system for optimum performance and durability. Plus, proper storage when not being used can avoid damage due to exposure to sunlight and other external elements.
Pro Tip: Get advice from industry professionals or experienced yacht owners when selecting and installing a fender system for optimal performance and longevity.
Frequently Asked Questions
FAQs – A Guide to Yacht Fender Systems
1. What is a yacht fender system?
A yacht fender system is a set of protective devices used to prevent damage caused by the contact between a yacht and a dock, wall, or another vessel. These devices, known as fenders, are designed to absorb impact and provide a cushioning effect.
2. How does a yacht fender system work?
A yacht fender system typically consists of inflatable or foam-filled fenders attached to the sides of the yacht. When the yacht comes into contact with a surface, the fenders absorb the impact, reducing the risk of damage. The fender system helps to distribute the force of the impact and protect both the yacht and the contacted surface.
3. What types of yacht fenders are available?
There are various types of yacht fenders available, including cylindrical, round, and flat fenders. Cylindrical fenders are popular for their versatile shape and ability to provide protection at different angles. Round fenders are commonly used for larger yachts and offer excellent buoyancy. Flat fenders, also known as dock fenders, are suitable for specific docking situations.
4. How do I choose the right yacht fender system?
When choosing a yacht fender system, consider the size and weight of your yacht, the docking conditions you encounter, and your personal preferences. It’s essential to select fenders that are appropriate for your yacht’s size and offer adequate protection for the docking situations you often face. Consulting with experts or fellow yacht owners can help you make an informed decision.
5. How should I maintain my yacht fender system?
Regular maintenance is crucial to ensure the effectiveness and longevity of a yacht fender system. Inspect your fenders regularly for any signs of wear, tears, or punctures. Clean them with mild soap and water, rinse thoroughly, and allow them to dry before storage. Store the fenders in a cool, dry place away from direct sunlight when not in use.
6. Can I use yacht fenders for other purposes?
Yes, yacht fenders can be utilized for other purposes besides protecting a yacht during docking. They can serve as protective barriers between boats or as cushioning devices for various water-based activities. Additionally, yacht fenders can be repurposed for temporary storage or used as extra seating on board.
Leave a Reply Cancel reply
Your email address will not be published. Required fields are marked *
Save my name, email, and website in this browser for the next time I comment.
Marine Expert
9 Best Boat Fenders & Fender Covers – (Reviews 2022)
It’s so easy to get your boat damaged when passing other vessels and tying to the docks, especially if you don’t have the best boat fender already installed. This piece of marine equipment can help you protect your boat from harmful impacts but also make it appear a bit bulkier, and thus, more attractive.
If you have never used these before but you want to ensure the exterior of your boat remains sleek for many years to come, check out our reviews. These also include the best boat fender cover – an additional piece of equipment that protects the fenders and adds another layer of protection to your boat.
See The Quick Comparison Chart
What Actually Are Boat Fenders and How Do They Work?
Boat fenders act like a safeguard to your vessel. You can call them a barrier or a cushion – either way, this piece of marine equipment acts like a tampon zone between your boat and other boats, as well as the pier and dock.
If you wouldn’t be using fenders, your boat would get easily damaged due to numerous impacts it faces when you are on the water. Thus, boat fenders absorb shocks that would make even the newest hulls look like they are at least a decade old.
So, now that you know why it is essential to protect your boat with fenders, let’s jump to another important section – types of boat fenders.
Types and Uses of Boat Fenders
1. cylindrical/long/walking fenders.
Subcategories of this type of fender include center-cored long fenders and two-eyed fenders. Both types work great and you choose them by preference.
Cylindrical fenders work best with protecting your boat during docking. If you mount them horizontally, it will be much easier to attach them to the dock as you will have two attaching points that secure the tie.
2. Round/Ball Fenders
Ball fenders are named like this due to their shape. Round, filled with air, made of sturdy materials (usually it is plastic), these boat fenders are robust and reliable.
Due to their shape, these fenders absorb impacts effortlessly. Using them is a breeze too. Just throw it overboard and it will protect your boat from damage. This type works best when moving through tight spaces, surpassing other sailboats, or when you are going in or out of locks.
Don’t get confused if you find round/ball fenders under the name of standby fenders. Their strongest point is that they are versatile. You can use them to protect your boat but to mark your anchor location as well.
3. Specialty Fenders
Specialty boat fenders have limited usage. For instance, these can protect rub rails or gunwales with boats that have low freeboards. One of the subcategories of specialty fenders – fender cushions prevent algae and mildew piling on your boat.
You can mount transom fenders if you want to protect the stern or the swim platform of your boat. Generally, specialty fenders are more affordable than round and cylinder boat fenders but still add solid protection to your vessel.
Best Boat Fenders Comparison Chart
Best boat fender reviews, 1. polyform g series boat fenders.
As one of the top-notch products on the market, the Polyform boat fender can withstand a lot of wear and tear and it will hold air impeccably even after years of use. The heavy rubber construction is the key to its air holding capacity while this material doesn’t damage vessels, which comes as a bonus to the overall quality of this boat fender.
Another feature you might appreciate is that you can adjust the pressure so the fender is more compatible with the size of your boat. Specifically designed for marine applications, the Polyform boat fender will contribute to having a pleasant stay on the water and will protect your vessel for many years to come.
- The color won’t fade or rub off over time,
- Suitable for most vessels,
- Puncture-proof bumper.
- Some customers might mind foul chemical odors this boat fender gives off when unpacked, but it will fade away after a couple of days.
2. Extreme Max 3006.7204 Boat Fender Value 2-Pack
It has proved as one of the best marine equipment products as it provides a great level of protection to your boat when it is windy outside or when the waves are strong. Eyelets make this unit even sturdier and resistant to impacts and ensure its long lifespan.
The Extreme Max boat fender is equipped with a rubber needle valve you should use to adjust the inflation level. As it is already a bit oversized, the chances of damaging your vessel when it gets knocked against the dock are much lesser than with smaller units.
- Ultraviolet stabilized,
- Suitable for use in different marine conditions,
- 2-year warranty.
- It doesn’t hold air the way you would expect it.
3. Polyform A-Series Buoy
The very construction of this buoy is very durable and resistant to impacts. Being exposed to the sun won’t spoil the color overly and you have a wide range of attractive colors option to choose from. It is suitable for vessels up to 20 feet and comes with a strengthened rope-hold.
All in one, the Polyform A-series buoy is a type of out-of-the-ordinary unit that can provide a high level of protection to your vessel and that is very practical and easy to use.
- Beginner-friendly,
- Can help you with pulling your anchor,
- The vinyl valve system makes it easy to set the pressure.
- The color of this buoy will fade after a while,
- Inflation adapter not included.
4. VIVOHOME Vinyl Ribbed Marine Boat Fender for Shield Protection
The vertical ribs make the VIVOHOME fenders resistant to wear and tear so make sure to have these in mind if you need something to withstand heavy use. You get 4 packs of bumpers and 4 inflating needles, pump, and a rope, which is basically everything you need to set the fenders up.
Inflating these is pretty straightforward and effortless and you can adjust the pressure to your liking. Even if you would using boat fenders the first time, these fenders would ensure you a positive experience on the water and a great level of protection to your boat.
- Act as a safeguard against hard surfaces and intense collisions,
- Best for use with boats, sailboats, yachts, row boats,
- Made of marine-grade PVC that is resistant to UV rays.
- Lose air slightly faster than some other products on the list.
5. X-Haibei Pair of Boat Fenders Ball Round Anchor Buoy
You won’t have to spend any extra bucks on extra needle valves, as you would get them in the pack with the fenders. The recommendable inflation is 2PSI and it would be best not to overinflate these fenders.
Suitable for most types of vessels, including yachts, small boats, navigation buoys, mooring buoys, etc, no doubt these boat fenders would fit your watercraft as well. Although these are bulkier to store, this is a minor drawback when comparing it to the overall value X-Hiabei provides.
- Gilt-edge construction ensures the durability of this product,
- 1-year warranty.
- You can even use these as punching bags.
- The color will start fading relatively quickly.
6. Taylor Made Products 952520 Inflatable Vinyl Boat Fender
It features a glossy finish so it looks pretty sleek, but offers much more than pleasant design. This boat fender comes with double molded ends that ensure its endurance. It is resistant to direct sunlight and salt water, which we can thank for that.
Lightweight, the Taylor Made product should be inflated at 2 psi if you want it to provide the utmost protection to your vessel. Although it is already inflated when shipped to you, you should be careful about inflating it afterward.
- For boats 15 to 20 feet,
- Available in different colors,
- Lifetime guarantee.
- There are no major cons to this unit, but be careful when it is shipped to you and check whether it is properly inflated before using it.
Best Boat Fender Cover Reviews
1. polyform navy 10258438 fenderfits cover.
Not only the color of this unit won’t fade over time but it looks pretty sleek when combined with white boat exterior. One more reason why this cover is so high-quality is that it is hand-finished.
Although these seem too soft, you can rest assured the Polyform boat fender cover will protect your vessel from damage when the wind is constantly blowing or when the waves go crazy. You can wash them easily from salt and reuse numerous times.
- Thick and soft,
- Provide solid protection,
- A rich color that doesn’t fade.
- You would have to wash them more frequently if you are sailing on the sea.
2. Taylor Made Products Premium Fender Cover
When it comes to sizing, the Taylor Made fender cover is supposed to fit most fenders but you should still check their sizing chart before making the final decision.
Maintaining these covers is a breeze. Just wash them in cold water and mild detergent and you will ensure their longer lifespan. However, most importantly – the Taylor Made covers will ensure your fenders last longer as well.
- Resistant to mildew, UV rays, and abrasion,
- Protect your fenders and your boat from the harsh marine environment,
- Won’t go stretchy over time.
- Materials like concrete can rip them off.
3. Polyform EFC-A Boat Fender Covers
The fact the Polyform boat fender cover is made of high-class polyester justifies its quality. Polyester is one of those lightweight materials that stays light even when you soak it into water.
You can wash this cover to ensure its longer lifespan. It takes a couple of minutes only to install it. The process is rather straightforward and, once you install it, it will be easy-peasy to take it off when you think it should be cleaned.
- Available in different sizes so you can find the one that fits your boat fenders easily,
- Doesn’t damage the boat surface,
- Limited 3-year warranty.
- Be careful with ordering, as you want to double-check your boat fenders’ size, otherwise – this unit won’t fit.
Boat Fender Buying Guide
1. Material
Boat fenders should protect your boat from outer impacts. Yet, as these act as an absorbent, they are first to face the shock. If the fenders you are using are not made of durable and resistant materials, these won’t protect your boat in the long run. In the worst case, low-quality fenders will even damage your vessel additionally.
High-quality rubber is the best material when it comes to fenders, as it doesn’t fade over time and is resistant to wind, shock waves, and other environmental impacts.
Not all fenders feature the same weight. If you would get a fender that’s too heavy for the type of your boat, you might experience slight wiggling when on the water. This applies to lightweight vessels in the first place, as larger and more massive boats can take heavier fenders. Yet, always check on the specs of the unit you have in mind to determine whether these would be too much for your watercraft.
It is always good to have soma spare fenders on your boat. Yet, depending on the type of fenders you are using, you might have a hard time storing them on your vessel. Most of the time, sailors store their fenders under the seats. Yet, taking them out can be a bit tricky as you can damage them in the process.
Be thoughtful of the space on your boat when buying fenders. Round fenders take more space in general, but you should still have 2 of these at least near at hand.
4. Cleaning
Would you ever guess boat fenders can get messy as hell? Any piece of marine equipment that sits outdoors is more prone to getting dirty, especially those pieces that come in contact with the water.
You should take proper care of your fenders and take algae and mildew off as soon as you get off the boat. Again, rubber is the type of material that doesn’t require too much of your effort to invest in cleaning.
Boat fender covers can protect your fenders, but these require some cleaning as well. Polyester and acrylic yard are a breeze to clean.
5. Accessories
No matter if your fenders come deflated or pre-inflated, you will need a pump to readjust them once they fatten. Usually, a regular pump would do but special valves require special pumps. Some manufacturers are thoughtful of this requirement and provide a pump within the package.
If you have a pair of old fenders and used a regular pump with them, it doesn’t mean this pump would suit the new fenders too, so you might need a pump adapter.
You want to position your fenders correctly, which may include tying several knots (depending on the size of your vessel). If you would be tying multiple knots, you will also need a height adjuster. Only a few manufacturers include this device with their fenders.
Boat fenders come in different colors. Yet, the exposure to salt water and sun rays can make their color fade. Once this happens, your fenders won’t look as sleek as they used to. The same applies to fender covers. That’s why t would be best to find products that are resistant to UV rays as they will retain their original appearance for longer.
Features To Consider When Choosing Boat Fender Covers
When looking for most of the pieces of marine equipment, including a boat anchor , trolling motor , etc, you should be wary of your boat’s size. We recommend opting for a fender that is larger in size than your vessel’s length indicates. This applies to the boat being in choppy waters in the first place.
A rule of thumb when buying boat fenders is to choose a fender that is double the size of your boat. In other words, it takes 2 inches of a fender for every foot of your boat when you are buying round fenders. With cylindrical fenders, go for a 1:1 ratio.
However, although this is a standard, we recommend going for a slightly larger fender. Choosing a smaller-in-size fender would create too much pressure of the boat’s size to it and the fender would get flattened quickly. Thus, it wouldn’t provide any protection to your boat. Yet, if you would get fenders that are too large, you would have a hard time mounting them.
2. Number of Fenders
If you have a 32-feet vessel, it would be wise to have at least 2 fenders per side. Also, a couple of spare fenders ( 2 minimum) would come handy if the ones you are using flatten during your stay on the water. With larger boats than 32-feet, you will need 4 fenders per side, as well as replacement units.
Also, it would be great to have fenders of different types if you want to ensure your boat is protected at the fullest. Use at least 2 fenders of a different type that will help you when you need backup when you are approaching the dock or when the wind is howling.
3. Fender Position
If you want boat fenders to protect your vessel the right way, you have to place them properly. Generally, set your fenders so they are slightly above the water surface (one to two inches). This way, the water won’t push them out of the way when you would be coming at the dock.
The lower you tie the fenders – the better. It would be best to tie them by using something solid, like a metal handle.
How To Tie Boat Fenders?
- Once it seems like the fenders are adjusted properly, add some extra half-hitches to secure the bond.
- Take the working end and pull it over the front of the rail, then round it up.
- As you do so, make sure the standing end is properly connected to the fender. It should cross the original line and wrap around the rail.
- Tie the working end on the front of the rail and tighten it.
- Now the fender is adjusted, tie one to two half-stitches to prevent it from slipping.
Safety Tips
- It would be best to use polypropylene rope when tying the knots as this type is more flexible than nylon.
- Always have a couple of spare fenders on the boat if you plan on staying longer on the water.
- Keep your fenders clean so they can last longer. This will prevent the fenders from flattening when you are sailing.
FAQ About Boat Fenders
1. do all boat fenders come with ropes.
No, they don’t. Just like some fenders come inflated, others deflated, some fenders come with ropes and some don’t. Keep this in mind when buying fenders, as buying a rope would be an extra cost.
2. What Size and How Many Boat Fenders Do I Need?
If you are buying cylindrical fenders, you will need 1 foot of fender per 1 foot of your boat. With round fenders, you will need 2 feet of fender per 1 foot of the vessel.
We would advise you getting at least 3 fenders for your 10-feet boat. Some fenders come in pairs, so you can get two pairs as well. Although fenders take some space on-board, the more you have – the safer you will be when on the water.
3. How To Maintain Boat Fenders?
Boat fenders require low-maintenance. Use water and mild detergent or soap to clean off salt, algae, and mildew deposits. Boat fender covers can also ensure a longer lifespan of your boat fenders.
Could you find the best boat fender and best boat fender cover among our reviews? These amazing pieces are a part of protective gear you should have in mind if you want to take proper care of your vessel.
Depending on the surroundings and your boat, you can choose different types of boat fenders, although it would be best to have at least two of each category. Now that you are more confident about getting the right units, we will recommend you to check our other marine equipment guides that will bring you total peace of mind when you are on the water.
Bonus guides: boat cover reviews – anchor rope reviews
About Peter Richardson
Peter Richardson decided that he needs to balance out the sedentary lifestyle of a software developer by getting out there more. He found passion in none other than – boats. This website represents everything he learned along the way. Finding the right equipment for your boat is no easy task, and that is what Peter’s articles aim to help you with.
Leave a Comment Cancel reply
Save my name, email, and website in this browser for the next time I comment.
Ex-Display & Sample Sale
- Search for:
No products in the basket.
- Base Layers
- Technical T-Shirts
- Sailing Jackets
- Sailing Trousers
- Dinghy Footwear
- Sweatshirts
- Holebrook Samples
- Pelle Samples
- Changing Robes
- Cleaners & Proofers
- Scarves / Snood
- Dinghy Equipment
- Hi-fits / Trousers
- Hiking Equipment
- Hiking Shorts
- Spray Tops / Smocks
- Full Wetsuits
- Shorty Wetsuits
- Long John Wetsuits
- Wetsuit Tops
- Wetsuit Shorts & Trousers
- Summer Wetsuits
- Winter Wetsuits
- Children’s Wetsuits
- Men’s Wetsuits
- Women's Wetsuits
- Wetsuit Sale
- Technical Clothing
- Casual Clothing
- Hats, Gloves, Socks & Scarves
- Watersports
- Accessories Sale
- Amazing Bundle Deals
- Cables & Accessories
- Fixed GPS/plotters
- GPS Antennas
- Handheld GPS/Plotters
- Marine Cameras
- Mounting/Brackets
- Radar Scanners
- Sailing Watches
- Thermal Cameras
- Waterproof Cases
- Accessories
- Fish Finder Sonar
- Depth Instruments
- Multifunction Systems
- Speed Instruments
- Weather Instruments
- Wind Instruments
- Autopilot Accessories
- Cockpit Autopilots
- Onboard Autopilots
- Navigation Charts
- Plotting Aids
- Entertainment Accessories
- Entertainment Systems
- Speakers & Subs
- Electronics
- 4G and WIFI
- Handheld VHF Radio
- Mounted VHF Radio
- VHF Antennas
- Walkie Talkies
- Buoyancy Aids
- Lifejackets
- Children’s Life Jackets
- Commercial Lifejackets
- Harnesses/Bosuns Chair
- Lifejacket Accessories
- Safety Knives
- Safety Lights
- Safety Lines
- PLB & AIS
- Satellite Communicators
- Fire Extinguishers
- GPS Tracker
- Liferaft Accessories
- Recovery Devices
- Survival Suit
- Cones & Balls
- Dye Markers
- Horns & Whistles
- RADAR Reflectors
- Bungs & Bailers
- Battery Management
- Chargers & Alternators
- Electrical Other
- Leisure Batteries
- Plugs & Connectors
- Shore Power
- Wind Generator
- USB & Phone Chargers
- Blocks & Terminals
- Circuit Breakers
- Seals / Outlets / Plugs
- Switches & Panels
- Wires & Cables
- Deck Lights
- Interior Lighting
- Navigation Lights
- Searchlights
- Head Torches
- Freshwater Pumps
- Macerator Pumps
- Service Kits
- Toilets/Waste
- Spray Guns & Connectors
- Toilet Accessories
- Toilet Parts
- Waste Tanks
- Ball Valves
- Inlet & Skin Fittings
- Metal Plumbing Fittings
- Plastic Plumbing Fittings
- Diverter Valves
- Non Return Valves
- Deionised Water
- Filters & Purification
- Taps & Sinks
- Water Heaters
- Water Tanks
- Gas Connectors
- Gas Fittings
- Bow Thruster
- Bungs And Self Bailers
- Cleats and Fairleads
- Deck Filler
- Deck Flooring & Protection
- Eye Bolts & U Bolts
- Grab Rail / Handles
- Hooks and Clips
- Latches & Catches
- Shackles & Swivels
- Tiller Extenders & Joints
- Track & Cars
- Winch Handles
- Fans & Windscoops
- Hatch & Inspection Covers
- Hatch Shades
- Hatches & Portlights
- Plastic Hatches
- Yacht / Keelboat Rope
- Dinghy Rope
- Dockline / Mooring Rope
- General Purpose Rope
- Watersports Rope
- Fender Rope
- Rope Accessories
- Furling & Reefing
- Mast, Spars & Sails
- Pins & Rings
- Rigging Screws, Adjusters & Tensioners
- Splicing & Whipping
- Thimbles & Stoppers
- Galvanising Paints
- Thinners & Solvents
- Paint Brushes
- Glue & Adhesives
- Mixing Pots & Accessories
- Resins & Epoxy
- Sealants & Caulking
- Boat Cleaner
- Cleaning Equipment
- Fabric Cleaners & Proofers
- General Cleaners
- Metal Cleaners
- Onboard Cleaner
- Polishes & Waxes
- Vinyl Cleaner
- Teak Cleaner
- All Zinc Anodes
- Zinc Shaft / Prop
- Zinc Engine / Outdrive
- All Aluminium Anodes
- Aluminium Hull
- Aluminium Shaft / Prop
- Aluminium Engine / Outdrive
- All Magnesium Anodes
- Magnesium Hull
- Magnesium Shaft / Prop
- Magnesium Engine / Outdrive
- Bow Thruster Anodes
- Hanging Anodes
- Bolts & Fixings
- Backing Pads
- Lubricants & Grease
- Power Tools
- Marine Prepacks
- Dehumidifiers
- Blowers & Exhaust
- Engine Oil & Additives
- Oil Extractors & Filters
- Shaft Bearings
- Pumps & Inflation
- Tender Accessories
- Petrol Engines
- Boat Fender
- Dock Fender
- Edging Strip
- Hooks & Pumps
- Mooring Buoy
- Step Fenders
- Anchor Bags
- Anchor Connectors
- Anchor Lines
- Anchor Windlass
- Compensators
- Personal Craft
- Engine Covers
- Fuel Tanks & Lines
- Kill Switches
- Propeller Bags
- Straps & Ratchets
- Flag Staff & Holder
- Lighters & Matches
- Cabinet Fridges
- Cooling Kits
- Portable Fridge/freezers
- Chandlery Misc
- Cup Holders
- Sail Knives
- Seats & Cushions
- Games & Toys
- Gift Vouchers
- Nautical Gifts
- Novelty Hats
- Anemometers
- Clocks & Barometers
- Teak Fittings
- Weather Stations
- Galley Equipment
- Tumblers & Glasses
- Water Bottles & Flask
- Inflatable Paddleboards
- Hard Paddleboards
- Inflatable Kayaks
- Handles / Bridles
- Throw Lines
- Swim Accessories
- Sea Scooter
- Free Delivery on UK mainland orders over £100 excl. Highlands / rural areas
Marine Fenders & Covers
Protect your boat from bumps and scratches when in the port or marina with our wide range of quality marine fenders. With thousands of items in stock and ready to ship, shop from our selection of boat fenders , dock fenders , step fenders , fender socks and covers . For all-round protection, stock up on essentials including mooring buoys and hardwearing edging strips .
Showing 1–36 of 55 results
Majoni Fender
Anchor Marine Standard Fenders
Majoni Dock Fender White
Fenderfit F Series
Trem Fender Baskets for 2 Fenders
Trem Spliced Polyester Fender Rope with Eyelet
Plastimo Articulated Rib Fender
Anchor Marine Fender Round Heavy Duty
Majoni Round Fender
Dan Fender Step
Fastfender Clips
Lalizas Ocean Inflatable Fender
Trem Fender Basket for 3 Fenders
Anchor Mooring Pick Up Buoy
Nuova Rade Rigid Mooring Buoys
Fender Baskets
Majoni Bow Fender
Pontoon Dock Fender Angled
Majoni Step Stair Fender
Majoni Dock Fender Articulated
Fender Flutes Pair
Fenderfits A Series
Anchor Marine Bow Fender 0041
Seago Spliced Fender Lines Pair 8mm
Ocean Blade Bow Fender
Anchor Marine Bow Fender 0011
Anchor Marine Single Eye Chubby Fenders
Dan Multi Dock Fender White
Talamex Fenderline 8mm 2 Pack
Nawa Swivel Connector for Fender Basket 25mm Rail
Majoni Fender Adaptor Screw Type
Polyform A Series Fender/Buoy
Anchor Marine Bow Fender 0021
Fender Cleat CL234
Dan Fender Inflation Adaptor
Anchor Marine Fender Inflation Kit
Username or email address *
Password *
Remember me Log in
Lost your password?
Email address *
A password will be sent to your email address.
New color ropeholds available for F Series Fenders and larger A Series and LD Series Buoys
Free Continental US and Discounted Worldwide Shipping For Orders Over $100 USD. Learn more...
Gift Cards now available, $25 - $1,000 USD
- United States (USD $)
TRUSTED WORLDWIDE
Made in the usa.
BOATING ACCESSORIES
RAFT SAFELY
With polyform a series.
POLYFORM F SERIES
BOAT FENDERS
Built to last.
THE GLOBAL STANDARD
ACCESSORIZE YOUR BOAT
With polyform fender covers, polyform boat fenders and buoys.
A Series Buoys
F Series Boat Fenders
G Series Boat Fenders
HTM Series Boat Fenders
LD Series Buoys
NF Series Boat Fenders
S Series Buoys
CC Series Buoys
CM Series Mooring Buoys
WS Series Marker Buoys
Polyform US
A-Series Buoy A-2 Navy Blue Ropehold
NF-Series Boat Fender NF-5
FIND THE RIGHT FENDERS FOR YOUR BOAT
Use Polyform's fender guide to help choose the best boat fenders for your boat
POLYFORM BOATING ACCESSORIES
SPLICED BOAT FENDER LINES
EFC BOAT FENDER COVERS
TFR BOAT FENDER HOLDERS
MOORING REELS
FENDERFITS BOAT FENDER COVERS
EFC SERIES BUOY COVERS
Polyform Inflation Products
POLYGUARD DOCK EDGING
Spare Parts
Polyform boat fenders and buoys are manufactured in the USA and recognized in ports and marinas across the world. Known for our signature blue rope-holds and trusted, durable designs, we set the standard for quality buoys and boat fenders. Discover what makes us Uniquely Polyform.
Your cart is empty
Subtotal:$0.00 USD
Large Yacht Fenders
Fendequip large Yacht Fenders are most suited to Superyachts and Megayachts who require increased protection for all mooring conditions. Despite their size, they are manufactured in exactly the same way as our standard maxiStow range and offer all of the benefits, at a much larger scale
Trusted by Superyachts worldwide
Pu, hdpvc and hypalon materials, standard and custom size options available, handmade in our uk factory, standard inflatable fender sizes.
See below for our standard range of maxiStow Inflatable Fender sizes . Need something bigger or custom sized? Simply complete the form below with your specific requirements and we will be happy to quote you.
maxiStow Inflatable Fender Materials
maxiStow HYPALON Inflatable Fenders are the ultimate professional inflatable fender solution and are the preferred choice by many superyacht captains and crews around the world.
Polyurethane (PU )
maxiStow Polyurethane (PU) Inflatable Fenders are extremely durable and are highly regarded, especially in circumstances where abrasion resistance is of upmost importance.
maxiStow HDPVC (Heavy Duty PVC) Inflatable Fenders are extremely popular with yachts of all sizes and type, providing extensive protection in all mooring and docking situations.
Get an Inflatable Fender Quotation for your Yacht
Please submit the form below or call +44196333322 to speak to a member of our sales team.
Order Online
Browse our range and order online at Fendequip-Direct.com
Buy Large Yacht Fenders »
- Fender Hooks
- Fender Covers
- Inflatable fenders
- Inflatable Day Shapes
- Personalisation & Embroidery
Information
- Superyacht Mooring Products
- News & Events
- Become a Dealer
- Orders, Delivery & Returns
Get in touch
Fendequip, Units 7-11 Murray Court, Murray Way, Wincanton, Somerset, BA9 9RX, UK
Tel: +44 1963 33322 [email protected]
Subscribe to our Newsletter
Company Registered in England: 5196607 | VAT Number: GB 854 9504 95 | © 2024 Fendequip Mooring Products Ltd
Customer Feedback Form
Please use the form below to submit your feedback, thank you.
Fender Covers Quote Request
Please submit your details below in order for us to prepare your quotation.
Find your Fender type:
- Yacht Fender
- Floating Marine Fenders
Yacht Fender for any Boat
can be applied to all ship sizes
The most popular boat/yacht fender in the world! Buy a set for your beautiful yacht immediately
Yacht fenders Overview
Yacht fenders are widely used in large ships, yachts, offshore platforms and ports, and can be fully adapted to ships. It uses compressed air as a buffer medium to absorb ship collision energy. Therefore, compared with the general compression rubber fender, it has the advantages of high energy absorption, small reaction force, and large contact area with the ship. There are two main types of yacht fenders. The A series fenders have an international style and are widely used in the mooring and berthing of small ships. The F series can be applied to all ship sizes.
SHA Series Introduction and Feature
SunHelm SHA series yacht fenders are internationally popular fenders, which are widely used in the mooring and berthing of small ships
High strength and high durability
SHA Series Specifications
What can we do for you.
We can definitely provide you with the best price Yacht Fender
SHF Series Introduction and Feature
SunHelm SHF series yacht fenders are the ultimate protection products for small boats, speedboats and fishing boats, and are ideal protection products for many boat owners.
SHF Series Specifications
Ship Launching Airbag
Pneumatic Fender
Best Boat Fenders For You (Ultimate Guide)
Boat bumpers and fenders come in all sorts of different shapes and sizes. Not only are there cylinder fenders, but there are round ones, flat ones, and so many more types of fenders. By the end of this article, you will know absolutely everything about boat fenders and which ones you will need for your vessel.
First I’m going to talk about the three most popular fenders and then talk more about unique fenders later in the article.
3 most popular boat fenders
Best all-around.
Cylinder Fenders
Commonly used on boats as they provide a large surface area and can still be stored quite easily.
Best For Large Boats
Spherical Fenders
These fenders can withstand a lot of force. So they’re best used for large boats and during docking.
Best For Small Boats
Flat Fenders
Easily stored, but doesn’t have a large enough diameter to handle heavy or maneuvering boats.
Although these are the most used fenders, there are many more available on the market including:
Dock Wheel Bumper
Transom Fenders
Cushion Fenders
V-shaped Fenders
Fender Pads
Low Freeboard Fender
Pontoon Fenders
Dock Edging
Inflatable Fenders
Click on any of these to purchase them or continue reading to learn more about them.
Note: Most of the products I mention in this article are made by Taylor Made and sold on Amazon. They are a very proven company that has been making boat fenders and bumpers for over 100 years, and they generally have the highest review ratings compared to their competitors.
Table of Contents
Boat fender sizing
Before we start talking more about specific fenders, let’s look at what size you need to get.
The general rule is 1″ of diameter for cylindrical fenders or 2″ of diameter for spherical fenders for every 5 feet of boat length. However, it’s never a bad idea to get a size larger than recommended, especially if you’re boat is in an area that gets a lot of storms, wind, waves, etc. which could cause it to bash against a dock.
Pros and cons of each fender type
Below I’ve listed all the different types of boat fenders. I’ve included pictures, pros and cons, and more about each one. Click on the fender you want to learn more about.
- Easy to store
- Large surface area
- Works for pretty much all types of boats
- Lots of different size options
- Does not have as large a diameter as spherical fenders
- Can slip pretty easily
There are two different types of cylinder fenders including:
Double-eye cylinder fenders are usually smaller than center-hole fenders making them easy to store away and easy to use. They have a dual-hole system, allowing you to connect a rope to both sides of the fender.
These fenders are most popular with small to medium-sized boats, but they do make the large enough for large vessels as well.
Center-hole
Center-hole cylinder fenders can be used both on your boat and on your dock. You can easily tie them sideways on a dock or your boat without needing to connect multiple ropes to both sides of the fender. A downside to them is that they are bulky and hard to store.
I usually only recommend having one or two of these fenders on your boat to protect the largest surface area (generally the sides near the stern). And if you have a boat smaller than 30 feet, you probably won’t need one.
- Large diameter means more protection
- Many different sizes
- Hard to store
- Can slip or move easily
- Lightweight
- Not as effective as inflatable fenders
- Helps adjusts your hull into your slip
- Protects your transom
- Great if you have a dingy or jet ski attached to your stern
- Great for protecting your boat against sea walls or poles
- Basically a mix of a flat fender and cylinder fender
- Best to use on a dock and not on your boat
- Provide a lot of protection (best used for large vessels)
- Stay centered on a pole
- Don’t slip as easily as cylinder fenders
- Don’t cause scratches or marks
- Not as protective as cylinder fenders
- Protect the top and sides of your boat
- Best for low riding bass boats
- Easily clip onto pontoons
- Only can be used for pontoon boats
- Protects your boat and dock in case of errant docking
- Comes in many different sizes
- Very large surface area
- Very large diameter
- Can be deflated and stored easily
- May need to reinflate them every so often
Best boat fender for different boat types
Many boats, especially larger ones are best protected by multiple different types of fenders on the boat and on the dock. For example, Yachts can be protected by cylinder fenders and/or spherical fenders, but it’s always a good idea to also have dock bumpers such as inflatable fenders, V-shaped fenders, and cushion fenders.
Best fender accessories
Fender accessories can help make your life easier and protect your boat from fender marks and scratches. Here are all of the different accessories I was able to find:
Fender covers
Fender covers not only improve the aesthetic of boat fenders, but they also help you avoid any marks or scratches that may be caused by them.
Although fenders are meant to cushion your boat, the plastic used on them is still quite hard and can rub away your gel coat over time, especially if you have a heavy boat in a high current area.
Having a fender cover will help eliminate any possible damage.
One of the most annoying things to do when you’re relaxing at the sand bar or beach is to have to rush your bumpers on as someone is pulling their boat up to you.
This product called Fendergrip, made by New World Marine solves this. It makes putting your fenders down to the perfect height and keeping them there a million times easier.
You don’t even have to tie any notes, just adjust the rope to the right hight and clamp it down.
Fender rack
A fender rack makes storing, securing, and deploying cylinder fenders so much easier than if you were to store them in storage compartments in your boat.
Taylor Made makes this one, and it easily connects to almost any railing or stanchion system.
The buy now button below puts two different products in your Amazon cart, one is a fender rack for 7-9 inch diameter fenders, and the other is for 9-11 inch. Just make sure to delete the one that is not the correct size for you.
What are the best boat fender brands?
The brand most of the products I am recommending in this article is Taylor Made and sold on Amazon. They have been in the fender business for over a century and have almost every kind of boat bumper/fender you could dream for.
However, you can expect the same or similar quality from other brands such as:
- Bass Pro Shops
How many fenders should a boat have?
You should have 1 fender per side for every 5-10 feet of boat, and no boat should have less than 3 fenders per side. Meaning a 15-foot boat should have 3 fenders per side, and a 50-foot boat should have 5-10 fenders per side. The amount you should use depends on factors such as where you are mooring, weather conditions, etc.
Fender should not be out when you are moving, they will just slow you down. However, when you are in a situation in which you need to put them down, they should be spread out evenly across your hull such as in the vessel from this image:
Related Article: How Many Fenders Do You Need For Your Boat?
How to clean boat fenders
Due to algae and barnacles, boat fenders can get very dirty very fast. This can rub off on your boat and leave algae marks that can be hard to get out. In order to keep them clean, you should:
- Keep them out of the water as much as possible . Leaving fenders in the water is the number one cause of dirty fenders. Marine growth will start to form in as little as a week and will be a pain to get out.
- Dry them off before putting them into storage . Water can cause mold and algae growth, so making sure you dry your fenders off and don’t store them in a wet area is important in keeping them clean.
- Clean your fenders with soap and fresh water regularly . Whenever you clean your boat, it’s always a good idea to do your fenders as well. Cleaning them regularly will make sure you don’t have to worry about any deep stains that may be very hard to get out.
However, if you fenders are already dirty and look something like the image below, you will need to use a few products and cleaning techniques to get them looking good again.
Here are the 4 steps to cleaning a boat fender:
- Take your fender somewhere away from the water or grass so no cleaning products can harm anything.
- Apply regular cleaning soap and cleaner bleach spray to the fenders and scrub them with a moderately stiff bristle brush .
- You can also use a pressure washer to get off any stains and marine growth.
I would not recommend you use any harsh chemicals as this can eat away the plastics on your fenders and not only reduce their lifespan but also possibly cause the plastics to rub off and stain your boat hull.
Added Tip: After lightly cleaning your fenders, you can spray them with tire foam . This will not only clean them more, but it will also restore their look.
Sometimes your fender may be dirty due to it rubbing off paint and gel-coat on your hull. Here is a clear example of this:
If you believe this is happening, you should purchase a fender cover such as this one to protect your hull and fender. Fender covers cover the hard plastic on fenders and eliminate rubbing.
How to tie a boat fender
If you don’t have fender clips, tying your fender to a rail requires a bit more effort. Check out the video below to learn how:
Where to find good deals on boat fenders
Included in this article are links to boat fenders mostly made by Taylor Made and sold on Amazon. These are top-end fenders and will last you a very long time. However, they are a bit pricy when compared to other brands on Amazon.
After checking out some of these cheaper brands, here are the three I found to have the best reviews and most relevant products:
- Dock Edge (specialize in dock bumpers including dock edges, dock wheels, etc.)
- Affordura (medium-priced cylinder fenders)
- Vingli (Very cheap cylinder fenders)
However, another great way to find boat bumpers and fenders is on the used market. For example, I went to Facebook Marketplace and searched for “boat fenders”. Here are the results:
Plenty of deals on fenders, many of which are made by good brands such as Taylor Made. They may need a bit of cleaning , but after that there about as good as new. I would recommend purchasing used from high-quality brands such as Taylor-made or polyform over the super cheap Amazon brands. Even though there used, they will still most likely last longer.
And before I end this article, here’s another look at the most popular boat fenders, so you don’t have to scroll all the way up to the top to purchase them.
- Recent Posts
- What Is The Cheapest Way To Store A Boat? - February 28, 2023
- Do Boats Need Bottom Paint? (Uncovering the Truth) - February 2, 2023
- How Much Is Bass Boat Insurance? (Real Quotes) - January 18, 2023
World Wide Shipping
Established Since 1986
Home » Shop » Fenders
€ 139 – € 1,492
Sail yachts normally use smaller sizes than power yachts. Yachts with very high hull normal prefer longer fenders.
Do you need help to chose the products suitable for your Yacht? Don't hesitate to contact us – we will be happy to assist you!
- Description
- Additional information
- Reviews (2)
Yachtfend protects your yacht
- Super light weight.
- Heavy duty type.
- SS Accessory 316 Steel.
- Vertical / horizontal use.
- 5 year warranty.
- 18 standard sizes.
- Yachts 30-300 feet.
- Color: Black. Other colors on request.
- Custom sizes available.
- Weight: 2 kg and up depending on size.
You can never be too well protected, but it’s easy to be under protected and end up with damage that could have been prevented with fenders of a sufficient size and strength.
The price of proper fendering is a very small percentage of the price of a yacht, and the one time they protect your boat from damage will pay for the cost of fenders many times over.
Yachtfend offer 5 years warranty program; the best in the industry! Warranty cover from manufacturer’s defects. Other failure on products not caused by manufacturer warrenty are not covered.
Yachtfend do not cover freight or other charges caused by defect.
See our warrenty scheme for further detail information. Yachtfend will always best possible try to help solve any problems.
2 reviews for Fenders
Shivam Kamat – May 30, 2022
Good Products
Kim – June 28, 2022
I’m so glad I purchased these fenders. They are great! Strong and durable, very high quality! I would definitely recommend these! Thank you Yachtfend🙌- I’m a very happy customer from New York!
Your email address will not be published. Required fields are marked *
Your review *
Name *
Email *
Save my name, email, and website in this browser for the next time I comment.
The yacht fenders we ordered are excellent quality and love the custom embroided fender covers . Delivery with Fedex directly to our local marina Marina di Portofino Italy
M/Y Freedom
Motor yacht 43m
Captain Anna Gregory
- CLIC & FILL
- CLAMP JACKET
- FTR SPANNER
- – – Ask for a Quote
- BOESHIELD T9
- SMART SYSTEM
- MY CART No products in cart.
- Sheated D Ring
- Air Pump Inflation Adapter
- GE 10 Electric Pump 12V
- Bravo GE 230/2000 Electric Pump
- FAQ’s
- Instructions
FENDERTEX | Inflatable Textile Fenders
Fendertex® is the only manufacturer of inflatable textile fenders for the yachting market. The Fendertex® standard line offers cylindrical , spherical , and tandem fenders. Fendertex® also offers a wide range of customizable textile fenders and accessories.
- Lightest fender in the world
- Outer shell made of one piece knitted engineered textile
- Can be deflated and rolled for stowage
- Built to withstand an immense amount of pressure
- Automatically adapts to temperature swings
- Available in three standard shapes and nine standard colors
- Customized sizes, colors, and embroidery options available
- Available accessories include fender covers, sheathed D-rings, braidlines, flatlines, ropes, pumps and custom embroidery
STANDARD SHAPES
The size of the fenders required for each boat depends on various factors: vessel size, weight, windage and freeboard height.
Cylindrical Fender
S PHERICAL Fender
TANDEM Fender
Ultra-lightweight.
Fendertex® Fenders are ultralightweight, making them easier to handle than typical PVC or other inflatable fenders
- Up to 95% lighter compared to PVC fenders
- Up to 40% lighter than other inflatable fenders
Space Saving
Storage of traditional fenders is often an issue on vessels. Fendertex® Fenders are designed to minimize the use of storage space. Once deflated and rolled, a set of fenders can easily be placed into a locker.
- 95% smaller when deflated compared to standard PVC fenders
- 50% smaller when deflated than other inflatable fenders
- Quickly inflates and deflates
- Can withstand an immense amount of pressure
- Holds shape after extended periods of pressure
- Made with dyed yarn for UV resistance
MEGA & GIGA YACHTS
FENDERTEX® offers fenders for mega and Giga yachts for the protection of hulls during berthing.
Studied, designed and made to measure to meet the requirements of berthing, handling, storage and aesthetics, the mega-yachts and giga-yachts' textile fenders provide the crew with a greater comfort of use and increased security.
FENDERTEX® currently equips a multitude of mega and Giga yachts of international renown. Mega Yachts and Giga Yachts Textile fenders are customizable in colour, shape and size.
BUMPER, GARAGE DOOR & PONTOON
This fender is mainly made to fit on a dock, pontoon or on a boat (bumper, yacht garage door ...) to allow safe docking. Several lengths, as well as several diameters, are available to meet your needs.
M ade up of the following components:
An inflatable/deflatable defense in FENDERTEX textile combining: -Ultra lightness, -Easiness of storage once deflated, -Easiness of maintenance thanks to machine washing, -Aesthetics thanks to the large choice of colour.
Adjustable strap rings to easily attach the protection on the existing attachment points on the dock or the boat. These rings are also fitted with cuffs that can be used to moor jet skis, tenders, tenders or toys.
Spliced ropes to securely and aesthetically attach the fender to the fixing points.
An inflation tip adaptable to any type of pump.
Do not hesitate to contact us for further information or quote.
ACCESSORIES
Spliced Fender Whips
Fender Covers
Inflation Pumps
Custom options, custom covers.
The knitted Fendertex® covers are customizable, any design logo or boat name can be added to the cover.
Embroidery and Stitching
Cover, retention strap and long side strap can be custom embroidered.
Wide Variety of Color Options
The fenders are available in standard or custom colours, as are sheathed D-rings, covers, ropes and stitching.
INTERACTIV CATALOG
* Only when using Seaview Modular Top Plate #ADAR1DMLTB.
Best Boat Fenders
December 22, 2023
This article may contain affiliate links where we earn a commission from qualifying purchases.
Key Takeaways
- Boat fenders are essential for protecting your vessel's hull from damage during docking.
- Selecting the right size and type of fender is crucial for ensuring maximum protection.
- The choice of fender depends on the size, docking conditions, and material preferences.
Unveiling the finest boat fenders as we highlight top picks to protect your vessel with unmatched efficiency and style.
The Best Boat Fenders are Polyform US G-Series for versatility, Taylor Made Super Gard for durability, Mission Sentry for innovative design, Dan-Fender for heavy-duty use, Aere Docking for easy storage, Majoni Star for budget-friendliness, and Taylor Made's Big B for all-around performance.
With years of sailing under my belt, I've seen how crucial the right fenders are to a boat's well-being. I've been through rough waters and calm harbors, and the difference a good fender makes is night and day. Choose based on your specific needs and conditions.
Table of contents
best boat fenders.
Boat fenders are essential accessories for protecting your boat from damage while docking or mooring. These cushions, also known as boat bumpers, serve as a barrier between your vessel's hull and the dock or other boats, absorbing shocks and preventing scratches or dents.
With countless fender options available in the market, selecting the right size and type for your particular watercraft is crucial to ensuring its maximum protection. Different fenders are designed for different types of boats and docking conditions. Cylindrical fenders, for instance, may be suitable for smaller boats, whereas larger boats may require round or custom-shaped fenders for adequate protection.
Here's a comparative table of the best boat fenders, including their key features and price range:
1. Polyform US G-Series Fender
Whether you're a recreational boater or a serious sailor, protecting your boat from potential damage is always a priority. Choosing the right boat fenders is crucial to ensuring your vessel stays in pristine condition while docking or rafting. One high-quality option to consider is the Polyform US G-Series Fender .
Specifications
- Material: High-quality, even wall-thickness marine-grade vinyl
- Shape: Cylindrical with reinforced rope holds
- Color Options: Wide range of colors to suit your preference
- Size Variations: Available in six sizes for boats ranging from sub-10 feet to up to 40 feet in length
- Inflation Valves: Featured in larger sizes for easy adjustment of air pressure
Performance
The Polyform G Series boat fender provides excellent protection for your boat's hull due to its cylindrical shape and strong, durable construction. The molded-in ribs add structural strength and minimize abrasion, ensuring longevity and consistent performance. The fender can be hung horizontally or vertically, allowing for versatile placement and maximum protection.
What Sets It Apart
The G-Series Fender from Polyform US boasts a high-quality, good-looking design that offers exceptional strength and durability. Its even wall thickness, reinforced rope holds, and the use of superior marine-grade vinyl make this fender stand out among competitors.
Recent Updates
As a leading boat fender manufacturer, Polyform US continually evaluates and enhances its product offerings based on customer feedback and industry advancements. Stay up-to-date on their official website for the latest updates on their products, including the G-Series fenders.
- Durable, high-quality materials for long-lasting protection
- Versatile in use - can be hung horizontally or vertically
- Wide range of sizes and colors to suit different boats and preferences
- Easy inflation and deflation for larger sizes
- Molded-in ribs offer additional strength and minimize abrasion
- It may not be suitable for very large boats or yachts
- The price point may be higher than some alternative options
Who Should Buy It
The Polyform G Series boat fender can be an excellent choice for boat owners seeking durable, reliable protection for their watercraft. If you value a robust yet aesthetically pleasing option and are willing to invest in a high-quality product, this Fender is an ideal choice for you.
Where To Buy It
Polyform US G Series boat fenders can be purchased from various retailers, both online and in stores. One reliable online option is Fisheries Supply , where you can find a wide range of G-Series fenders.
2. Taylor Made Super Gard Fender
The Taylor Made Super Gard Fender is a popular choice among boat owners seeking high-quality dock protection.
Here are the key specifications of the Taylor Made Super Gard Fender:
- Made of marine-grade vinyl material
- Available in various sizes, suitable for different boat sizes
- It comes in multiple color options
- Fitted with corrosion-proof polycarbonate grommets for maximum durability
- Recommended inflation: 2 PSI
Taylor Made Super Gard Fenders are designed to offer maximum protection for your boat's hull due to their durable construction with marine-grade vinyl. The fender's shape allows them to be hung horizontally or vertically, so you can easily adapt it to your docking needs. Many boaters find these fenders particularly effective for smaller boats thanks to their lightweight nature and ease of use.
The Taylor Made Super Gard Fender features a unique combination of the two-eyelet shape of the Hull Gard fender and the thick walls and ribbed design of the Big B. This blend gives it extra strength, allowing the fender to withstand repeated stress and compression caused by contact with docks, pilings, and other boats.
Although there aren't any recent substantial updates to the Super Gard Fender, Taylor Made consistently maintains a high standard in their products' quality and durability. Moreover, the brand continues to offer various sizes and color options for the Super Gard Fenders to cater to different boat owners' preferences.
- Made of marine-grade vinyl, ensuring durability and protection for your boat
- It can be hung horizontally or vertically, providing versatile protection
- Lightweight, making it easy to handle and store
- Offered in multiple sizes, fitting boats of various types and sizes
- Available in different color options, allowing you to match your boat's theme
- Some users may prefer round fenders over the Super Gard Fender's oval shape
- It may not be the ideal choice for larger boats that require more substantial protection
If you're a boat owner looking for a reliable fender that offers excellent protection and versatility, the Taylor Made Super Gard Fender could be an ideal option. Its marine-grade vinyl construction makes it durable, while its availability in various sizes and colors ensures customization according to your needs.
You can purchase the Taylor Made Super Gard Fender from several online retailers. Notably, you can find it on West Marine and Amazon .
3. Mission Sentry Boat Fender
The Mission Sentry Boat Fender offers optimal protection for your boat and effective performance in various docking situations.
- Made with closed-cell foam
- Constructed for smaller boats
- Vertical and horizontal hanging options
- Corrosion-proof polycarbonate grommets
- Available in multiple color options
The Sentry Fender, designed by Mission Boat Gear, stands out for its excellent performance. With a unique oval shape that contours to your boat's hull, it provides protection both above and below the rub rail. This innovative design makes it easier for you to attach it to a dock cleat or boat cleat without the need for any knots, ensuring maximum protection for your boat.
The Mission Sentry Boat Fender is specifically designed for smaller boats such as tow-sports boats and bass boats but still offers the versatility and adaptability needed for larger watercraft.
Unlike traditional cylindrical fenders, the Sentry Fender can be hung both horizontally and vertically, giving you the flexibility to protect your boat in various docking situations. Its closed-cell foam construction provides both lightweight and durability.
As a modern solution for boaters, the Mission Sentry Boat Fender has been continuously updated and improved to meet the evolving needs of boat owners. These updates include more color options, enhanced durability, and compatibility with various boat styles.
- Versatile design for various docking situations
- Effortless to attach and adjust
- Protects your boat's hull and rubs rail
- Provides maximum protection on smaller boats
- Lightweight and durable construction
- It may not provide as much protection for large boats
- Higher price compared to traditional boat fenders
- Limited availability in some regions
The Mission Sentry Boat Fender is perfect for boat owners who have smaller boats and are looking for an innovative and versatile fender. If you're tired of struggling with traditional round boat fenders or attwood boat fenders that may not offer sufficient protection for your boat's unique shape and contours, this fender is the ideal solution.
You can purchase the Mission Sentry Boat Fender from its official website , reputable dealers like WakeMAKERS , or even check for availability on Amazon .
4. Dan-Fender Heavy Duty Fender
The Dan-Fender Heavy Duty Fender is a top-quality product designed to protect your boat in the toughest mooring conditions. Engineered for durability and performance, this fender offers maximum strength, making it suitable for commercial vessels and heavy-duty applications.
Dan-Fender Heavy Duty Fenders are incredibly durable, withstanding harsh marine environments and offering excellent protection against dock pilings and other boats. The commercial-grade marine vinyl and stainless steel eyes provide superior strength for long-lasting use.
Dan-Fender's focus on producing fenders of the highest quality is evident in their Heavy Duty Fenders. By employing commercial-strength marine vinyl and stainless steel eyes, these robust fenders can tolerate demanding thrashing against docks and pilings, making them perfect for larger vessels or heavy-duty purposes.
Always striving for improvement, Dan-Fender has maintained its reputation for innovative, high-quality products since 1982. For the most recent updates and product offerings, be sure to visit the official Dan-Fender website .
- Constructed from commercial-strength marine vinyl for long-lasting performance
- Extended cushioning against docks and pilings
- It can be hung vertically or horizontally
- Various color options for individual preferences and improved visibility
- It may be more expensive than other fenders on the market
- Larger and heavier than many alternatives
If you own a commercial vessel or require a heavy-duty fender to ensure maximum protection for your boat, the Dan-Fender Heavy Duty Fender is an excellent choice. Its durability and performance make it well-suited for larger boats or those with specific needs due to local mooring conditions.
You can purchase the Dan-Fender Heavy Duty Fender on Amazon , ensuring a reliable and convenient shopping experience.
5. Aere Docking Solutions Fender
Aere Docking Solutions is a well-known manufacturer of high-quality boat fenders. The company offers various types and sizes of fenders to cater to different boat owners' needs. In this section, we will discuss the specifications, performance, and benefits of Aere Docking Solutions Fenders, along with some recent updates and drawbacks.
- Material: Multi-layered, PVC coated fabric
- Reinforcement: High-strength fabric bands
- Attachment: Heavy-duty, reinforced D-rings
- Warranty: 6-year prorated factory warranty
- Types: Inflatable fenders and Fenda-Sox fender covers
AERE Docking Solutions fenders provide excellent protection for a boat's hull with their durable and lightweight construction. Their inflatable fenders can easily be inflated and deflated, making storage a breeze. Moreover, the reinforced D-rings allow for secure attachment to your boat or dock.
AERE fenders are different from other boat fenders in the market due to their exceptional build quality and user-friendly design. They use multi-layered, PVC-coated fabrics, externally reinforced with additional bands of high-strength fabric. This ensures maximum protection for your boat while also maintaining a lightweight construction.
Recently, the company has expanded its product line to include not just inflatable fenders but also Fenda-Sox fender covers that protect your boat finish in style and come in various sizes compatible with different fender manufacturers.
- Excellent protection for your boat's hull
- Durable and lightweight construction
- Easy storage with inflatable design
- Different types and sizes are available to cater to various boating needs
- Fenda-Sox fender covers for additional boat finish protection
- Higher price point compared to some competing products
- Inflatable fenders might require additional care and maintenance
If you are looking for a reliable and high-quality fender for your boat, AERE Docking Solutions fenders are an excellent choice. They are perfect for boat owners who need durable and lightweight protection for their boats, especially if storage is a concern. The wide range of types and sizes available ensures there is a perfect option for every boating need.
AERE Docking Solutions fenders can be purchased from a variety of retailers, such as Fisheries Supply and West Marine .
6. Majoni Star Fender
The Majoni Star Fender is a popular choice among boat owners for its durability and versatility. This type of cylindrical fender comes in different sizes to accommodate a variety of watercraft, providing optimal protection to boats while docked.
The Majoni Star Fender is available in various sizes to cater to a range of boats. Here's a brief overview of the sizes:
- Size 1: 12cm x 45cm
- Size 2: 15cm x 58cm
Majoni Star cylindrical fenders are known for their high-quality performance. They can be easily attached in both vertical and horizontal orientations, providing versatile protection for your vessel. Made from durable materials, these fenders are meant to withstand the test of time, ensuring long-lasting usage.
The Majoni Star Fender sets itself apart from other boat fenders with its unique features and construction:
- Cylindrical shape for maximum hull protection
- Reinforced attachment eyes for secure lashing
- Versatile in both horizontal and vertical positions
While there have not been significant recent updates to the Majoni Star Fender, it continues to be a reliable and trusted choice among boat owners for reliable topside protection.
- Provides ample protection to your boat's hull
- Available in various sizes to cater to different types of watercraft
- It can be used in both horizontal and vertical orientations
- Limited color options compared to other brands
- It may not be as lightweight as some other boat fenders
The Majoni Star Fender is well-suited for sailors, boat owners, and enthusiasts seeking versatile and reliable protection for their vessels. Whether you have a smaller boat or a large yacht, the available sizing options make it suitable for most watercraft.
Majoni Star Fenders are available for purchase at various online retailers, including Marine Super Store .
7. Big B Inflatable Vinyl Fender by Taylor Made
The Big B Inflatable Vinyl Fender offers excellent protection for your boat while docking or in open waters. This fender combines durability with versatility, making it a top choice for both professional and recreational boaters.
- Material: Marine-grade vinyl
- Diameter: Available in multiple sizes
- Center Hole: 3/4" (accepts up to 5/8" diameter rope)
- Inflation Valve: Molded rubber football needle valve
- Color Options: Various
The Big B Inflatable Vinyl Fender is known for its consistent performance. Its high-quality materials make it durable, tough, and resistant against bumps and scratches that may occur during docking or sailing. The ribbed design and molded rubber valve also ensure easy inflation and long life, making it a reliable choice for the protection of your boat.
One unique feature of this inflatable vinyl fender is its center rope tube, which allows both vertical and horizontal hanging in just one line. This versatility sets it apart from other boat fenders in the market and provides better adaptability for various docking situations.
There have been no recent updates to this specific boat fender model. However, Taylor Made continues to improve and innovate its boat fender product line. Stay tuned for any potential updates or new releases.
- Offers maximum protection for your boat's hull
- Molded rubber valve for simple inflation and maintenance
- Constructed with marine-grade vinyl for long-lasting performance
- Available in multiple color options to match your boat’s aesthetic
- It may require more frequent inflation checks
- Might not offer optimal protection for larger boats without additional, larger fenders
Big B's Inflatable Vinyl Fender is an ideal choice for boat owners with smaller boats who are looking for a combination of protection, versatility, and durability. This fender is perfect for individuals who often dock their boats in various environments or need that extra flexibility while sailing.
There are multiple platforms to buy the Big B Inflatable Vinyl Fender from, some popular choices include Taylor Made's official website and online retail platforms such as Amazon .
Best Practices for Fender Maintenance and Care
Effective fender maintenance and care involve regular inspections, proper cleaning, diligent repairs, and adapting to seasonal changes to ensure optimal protection for your boat.
Routine Inspection
Regular inspection is key to maintaining boat fenders. Check for signs of wear, such as cracks or punctures, and ensure they're properly inflated. This simple step can prevent unexpected failures and extend the lifespan of your fenders.
Cleaning and Storage
Clean fenders periodically with mild soap and water to remove salt, dirt, and marine growth. When not in use, store them in a dry, shaded area. Exposure to harsh sunlight and extreme temperatures can degrade the material over time.
Repair and Inflation
For minor damages, use repair kits specifically designed for fender materials. Always adhere to the manufacturer's guidelines for inflation. Over or under-inflated fenders can compromise their effectiveness and increase the risk of damage to your boat.
Seasonal Care
In colder climates, remove fenders before freezing temperatures set in to prevent cracking. During the boating season, adjust the position of the fenders as needed to ensure they provide optimal protection based on different docking conditions and water levels.
Best Boat Knives
Best Boat Accessories For Dads
Best Fuel Water Separator For Boat
Best Boat Watches
About THE AUTHOR
Brian Samson
I have a deep love of houseboating and the life-changing experiences houseboating has brought into my life. I’ve been going to Lake Powell on our family’s houseboat for over 30 years and have made many great memories, first as a child and now as a parent. My family has a passion for helping others have similar fun, safe experiences on their houseboat.
Trending Now
The Best Boat Safety Gear for Every Zodiac Sign
People Who Are Good At Capturing Stunning Lake Photos Always Use These Accessories
Best Jon Boat Seats
Best Bottom Paint For Trailered Boats
After spending over 30 years on houseboats, the memories and knowledge we've gained will never fade. Learn from our experiences here on LakeWizard. You can read more about us and our team, here .
©2024 LakeWizard. All rights reserved.
You can email us at [email protected]
LakeWizard.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs including but not limited to ShareASale, CJ, and ClickBank, and is compensated for referring traffic and business to these companies.
Covers to fit PROSTOCK Fenders
Covers to fit AERE Fenders
Covers to fit DOCK BUDDY
Covers to fit TAYLOR MADE fenders
Covers to fit polyform ball & htm fenders.
Fender & Mooring Line Covers PLUSH
ARMOUR Protection Chafe Sleeves
Shore Power Cable / Line Slings
- Rope Selection Guide – Main Page
- Rope Strength Guide
- Bulk Rope Catalog Part Numbers
- Rope Colors
- Denver Rope Mixer
- Mooring Buoys, Boat Fenders, Boat Fender Lines & Rope Floats
Large Boat Fenders & Boat Fender Accessories
- Custom Boat Lines – Main Page
- Anchor Lines
- Anchor Rode / Windlass Chain
- Mooring Pendants, Mooring Bridles, Anchor Chain Snubber Bridles, and Anchor Chain Snubber Pendants
- Houseboat Lines
- Whipping Twine
- Recovery Ropes, Tow Lines, Tow Bridles, Tow Ropes, Winch Ropes, & Winch Lines – Main Page
- Tow Lines, Recovery Ropes & Tow Ropes
- Tow Bridle Videos
- Tow Bridles
- Winch Lines & Winch Rope
- Heavy Marine, USCG, USN, Tow Hawsers & Mooring Hawsers – Main Page
- Single Point Mooring Hawsers & Mooring Lines
- Heavy Marine Hawser Rope Hardware & Hawser Rope Fittings
- General Marine Hardware – Main Page
- ANCHORS (Fortress, Danforth, Super Hooker, Seamaster, Plow, more)
- ANCHOR CHAIN (Galvanized & Stainless Steel Anchor Chain, Anchor Rode Chain, Windlass Chain)
- Galvanized Hardware – Main Page
- Galvanized Anchor Swivels & General Swivels
- Galvanized Cleats
- Spring Clips & Carabineers
- Galvanized Hooks
- Galvanized Links & Rings
- Spool, Shield, and Shackle Assemblies
- Galvanized Shackles
- Galvanized Thimbles
- Stainless Steel Hardware – Main Page
- Anchor Swivels & General Swivels
- Stainless Steel Cleats
- Stainless Steel Clips
- Stainless Steel Hooks
- Stainless Steel Links & Rings
- Stainless Steel Shackles
- Stainless Steel Snaps
- Stainless Steel Thimbles
- Security Hardware
- Fitness – Exercise – Training Ropes & Climbing Ropes
- Weightlifting – Exercise – Training Chain
- Video Gallery
- Rope Pictures and More Pictures
- Boat Line Definitions & Marine Application Guide
- Contact Us – Request Quotation
- Additional Information & PDF Downloads
- Horse & Animal Rope
- Animated Knot Tying
- Appendix and Terms & Conditions
- PDF Downloads
Contact Us – Request Quotation
Call (303) 809-7274
Email [email protected]
Currency: GBP
- Worldwide Delivery
Mooring Warps and Mooring Lines
- LIROS 3 Strand Polyester Mooring Warps
- LIROS Braided Dockline Mooring Warps
- LIROS Classic Mooring Warps
- LIROS Green Wave 3 Strand Mooring Warps
- LIROS Handy Elastic Mooring Warps
- LIROS Moorex12 Mooring Warps
- LIROS Octoplait Polyester Mooring Warps
- LIROS Polypropylene Floating Mooring Warps
- LIROS Super Yacht Mooring Polyester Docklines
- Marlow Blue Ocean Dockline
Mooring Accessories
- Mooring Cleats and Fairleads
- Mooring Compensators
- Mooring Shackles
- Mooring Swivels
Mooring Strops
- LIROS 3 Strand Nylon Mooring Strops
- LIROS Anchorplait Nylon Mooring Strops
- Small Boat and RIB Mooring Strops
Mooring Bridles
- V shape Mooring Bridles
- Y shape Mooring Bridles
Mooring Strops with chain centre section
- 3 Strand / Chain / 3 Strand
- Anchorplait / Chain / Anchorplait
Bonomi Mooring Cleats
- Majoni Fenders
- Polyform Norway Fenders
- Dock Fenders
- Fender Ropes and Accessories
- Ocean Inflatable Fenders
Mooring Buoys
Max power bow thrusters.
- Coastline Bow Thruster Accessories
50 metre / 100 metre Rates - Mooring
Mooring information.
- Mooring Warps Size Guide
- Mooring Lines - LIROS Recommended Diameters
- Mooring Rope Selection Guide
- Mooring Warp Length and Configuration Guide
- How to estimate the length of a single line Mooring Strop
- Mooring Ropes - Break Load Chart
- Mooring Compensator Advisory
- Rope Cockling Information
Fender Size Guide
Majoni Fender Guide
- Polyform Norway Fender Inflation Guide
Custom Build Instructions
- More Article and Guides >
Anchor Warps Spliced to Chain
- LIROS 3 Strand Nylon Spliced to Chain
- LIROS 3 Strand Polyester Spliced to Chain
- LIROS Anchorplait Nylon Spliced to Chain
- LIROS Octoplait Polyester Spliced to Chain
Anchor Warps
- Leaded Anchor Warp
- LIROS 3 Strand Nylon Anchor Warps
- LIROS 3 Strand Polyester Anchor Warps
- LIROS Anchorplait Nylon Anchor Warps
- LIROS Octoplait Polyester Anchor Warps
- Aluminium Anchors
- Galvanised Anchors
- Stainless Steel Anchors
Calibrated Anchor Chain
- Cromox G6 Stainless Steel Chain
- G4 Calibrated Stainless Steel Anchor Chain
- Lofrans Grade 40
- MF DAMS Grade 70
- MF Grade 40
- Titan Grade 43
Clearance Chain
Anchoring accessories.
- Anchor Connectors
- Anchor Trip Hooks and Rings
- Anchoring Shackles
- Bow Rollers and Fittings
- Chain and Anchor Stoppers
- Chain Links and Markers
50 / 100 metre Rates - Anchoring
Chain snubbers.
- Chain Hooks, Grabs and Grippers
- Chain Snubbing Bridles
- Chain Snubbing Strops
Drogue Warps and Bridles
- Lewmar Windlasses
- Lofrans Windlasses
- Maxwell Windlasses
- Quick Windlasses
Windlass Accessories
- Coastline Windlass Accessories
- Lewmar Windlass Accessories
- Lofrans Windlass Accessories
- Lofrans Windlass Replacement Parts
- Maxwell Windlass Accessories
- Quick Windlass Accessories
Anchoring Information
- How To Choose A Main Anchor
- Anchoring System Assessment
- Anchor Chain and Rope Size Guide
- The Jimmy Green Guide to the Best Anchor Ropes
- What Size Anchor Do I Need?
- Anchor Size Guides
- Anchor Rope Break Load and Chain Compatibility Chart
- How to Choose Your Anchor Chain
- How to Establish the Correct Anchor Chain Calibration?
- Calibrated Anchor Chain - General Information
- Calibrated Anchor Chain Quality Control
- Calibrated Chain - Break Load and Weight Guide
- Galvanising - Managing Performance and Endurance expectation
- Can Galvanised Steel be used with Stainless Steel?
- Windlass Selection Guide
- More Articles and Guides
Stainless Steel Wire Rigging and Wire Rope
- 1x19 Wire Rigging
- 7x19 Flexible Wire Rigging
- Compacted Strand Wire Rigging
- Insulated 1x19 Wire Backstays
Wire Rigging Fittings
- Swaged Terminals
- Swageless Terminals
- Turnbuckles / Rigging screws
- Turnbuckle Components
- Backstay Insulators
- Wire Terminals
Rigging Accessories
- Backing Plates
- Backstay Adjuster and Fittings
- Backstay Blocks
- Pins, Rings and Nuts
- Rigging Chafe Protection
Fibre Rigging
- DynIce Dux Fibre Rigging
- LIROS D-Pro Static Rigging
- LIROS D-Pro-XTR Fibre Rigging
- Marlow Excel D12 MAX 78 Rigging
- Marlow M-Rig Max Rigging
Fibre Rigging Fittings
- Bluewave Rope Terminals
- Colligo Marine Terminals
Dinghy Rigging
- Dinghy Rigging Fittings
- Fibre Dinghy Rigging
- Stainless Steel Dinghy Rigging
Wind Indicators
Guard wires, guardrails and guardrail webbing.
- Guard Rail Fittings
- Guard Rails in Fibre and Webbing
- Guard Wire Accessories
- Guard Wires
Furling Systems
- Anti-torsion Stays
- Headsail Reefing Furlers
- Straight Luff Furlers
- Top Down Furlers
Furling Accessories
- Continuous Furling Line Accessories
- Furling Line Accessories
50 / 100 metre Rates - Wire and Fibre
Standing rigging assistance.
- More Articles and Guides >
- Cruising Halyards
- Performance Halyards
- Dinghy Halyards
Rigging Shackles
- Bronze Snap Shackles
- Captive and Key Pin Shackles
- hamma™ Snap Shackles
- Selden Snap Shackles
- Soft Shackles
- Standard Snap Shackles
- Tylaska End Fittings
- Wichard Snap Shackles
Lashing, Lacing and Lanyards
- LIROS 3 Strand Lashing, Lacing and Lanyards
- LIROS Braided Lashing, Lacing and Lanyards
- Cruising Sheets
- Performance Sheets
- Dinghy Sheets
- Continuous Sheets
- Tapered Sheets
Running Rigging Accessories
- Anti-Chafe Rope Protection
- Barton Sail Handling
- Lazy Jack Sail Handling
- Rodkickers, Boomstruts
- Sail Handling Accessories
- Slab Reefing
Shock Cord and Fittings
Control lines.
- Cruising Control Lines
- Performance Control Lines
- Dinghy Control Lines
- Continuous Control Lines
Classic Ropes
- 50 / 100 metres - Classic
- Classic Control Lines
- Classic Docklines
- Classic Halyards
- Classic Sheets
- LIROS Classic 3 Strand Polyester
50 / 100 metre Rates - Running Rigging
- 50 / 100 metres - Cruising Ropes
- 50 / 100 metres - Dinghy Ropes
- 50 / 100 metres - Lashing and Lanyards
- 50 / 100 metres - Performance Ropes
- LIROS Ropes
- Marlow Ropes
Running Rigging Resources
- Running Rigging Rope Fibres and Construction Explained
- How to Select a Suitable Halyard Rope
- How to select Sheets and Guys
- Dyneema Rope - Cruising and Racing Comparison
- Dinghy Rope Selection Guide
- Rope Measurement Information
- Running Rigging - LIROS Recommended Line Diameters
- Running Rigging Break Load Comparison Chart
- Colour Coding for Running Rigging
- Selecting the right type of block, plain, roller or ball bearing
- Replacing your Furling Line
- Recycling Rope
- Running Rigging Glossary
Custom Build Instructions for Sheets, Halyards, Control Lines
Low friction rings, plain bearing blocks.
- Barton Blocks
- Harken Element Blocks
- Seasure 25mm Blocks
- Selden Yacht Blocks
Wooden Blocks
Ball bearing blocks.
- Barton Ball Bearing Blocks
- Harken Ball Bearing Blocks
- Holt Dynamic Blocks
- Selden Ball Bearing Blocks
Ratchet Blocks
- Harken Ratchet Blocks
- Selden Ratchet Blocks
Roller Bearing Blocks
- Harken Black Magic Blocks
- Selden Roller Bearing Blocks
Clutches and Organisers
- Barton Clutches and Organisers
- Lewmar Clutches
- Spinlock Clutches and Organisers
Genoa Car Systems
- Barton Genoa Sheeting
- Harken Genoa Systems
- Lewmar HTX Genoa Systems
Traveller Systems
- Barton Traveller Systems
- Harken Traveller Systems
Deck Fittings
- Bungs and Hatches
- Bushes and Fairleads
- Deck Eyes, Straps and Hooks
- Pad Eyes, U Bolts and Eye Bolts
Rudder and Transom Fittings
- Pintles and Gudgeons
- Tiller Extensions and Joints
Stanchion Blocks and Fairleads
Snatch blocks.
- Barton K Cam Cleats
- Harken Ball Bearing Cam Cleats
- Holt Cam Cleats
- Selden Cam Cleats
- Spinlock PXR Cleats
Block and Tackle Purchase Systems
- Barton Winches, Snubbers and Winchers
- Coastline Electric Winch Accessories
- Harken Winches, Handles and Accessories
- Karver Winches
- Lewmar Winches, Handles and Accessories
- Winch Servicing and Accessories
Deck Hardware Support
- Blocks and Pulleys Selection Guide
- Barton High Load Eyes
- Dyneema Low Friction Rings Comparison
- Seldén Block Selection Guide
- Barton Track Selection Guide
- Barton Traveller Systems Selection Guide
- Harken Winch Selection Guide
- Karver Winch Comparison Chart
- Lewmar Winch Selection Guide - PDF
- Winch Servicing Guide
Sailing Flags
- Courtesy Flags
- Red Ensigns
- Blue Ensigns
- Flag Accessories
- Flag Staffs and Sockets
- Flag Making and Repair
- Signal Code Flags
- Galvanised Shackles
- Stainless Steel Shackles
- Titanium Shackles
- Webbing only
- Webbing Restraint Straps
- Webbing Sail Ties
- Webbing Soft Shackles
Hatches and Portlights
Sail care and repair.
- Sail Sewing
Maintenance
- Antifouling
- Fillers and Sealants
- Primers and Thinners
- PROtect Tape
Fixings and Fastenings
- Monel Rivets
- Screws, Bolts, Nuts and Washers
- U Bolts, Eye Bolts and Pad Eyes
Splicing Accessories
- Fids and Tools
- Knives and Scissors
General Chandlery
- Barrier Ropes
- Canvas Bags and Accessories
- Carabiners and Hooks
- Netting and Accessories
- Rope Ladders
Seago Boats and Tenders
Chandlery information, flag articles.
- Flag Size Guide
- Bending and Hoisting Methods for Sailing Flags
- Courtesy Flags Identification, Labelling and Stowage
- Courtesy Flag Map
- Flag Etiquette and Information
- Glossary of Flag Terms and Parts of a Flag
- Making and Repairing Flags
- Signal Code Message Definitions
Other Chandlery Articles
- Anchorplait Splicing Instructions
- Antifoul Coverage Information
- Hawk Wind Indicator Selection Guide
- Petersen Stainless - Upset Forging Information
- Speedy Stitcher Sewing Instructions
- Thimble Dimensions and Compatible Shackles
Jackstays and Jacklines
- Webbing Jackstays
- Stainless Steel Wire Jackstay Lifelines
- Fibre Jackstay Lifelines
- Jackstay and Lifeline Accessories
Safety Lines
Lifejackets.
- Children's Life Jackets
- Crewsaver Lifejackets
- Seago Lifejackets
- Spinlock Lifejackets
Buoyancy Aids
Life jackets accessories.
- Lifejacket Lights
- Lifejacket Rearming Kits
- Lifejacket Spray Hoods
Overboard Recovery
- Lifebuoy Accessories
- Purchase Systems
- Slings and Throwlines
Floating Rope
- LIROS Multifilament White Polypropylene
- LIROS Yellow Floating Safety Rope
- Danbuoy Accessories
- Jimmy Green Danbuoys
- Jonbuoy Danbuoys
- Seago Danbuoys
- Liferaft Accessories
- Seago Liferafts
Safety Accessories
- Fire Safety
- Grab Bag Contents
- Grab Bags and Polybottles
- Handheld VHF Radios
- Sea Anchors and Drogues
Safety Resources
- Guard Wires - Inspection and Replacement Guidance
- Guard Wire Stud Terminal Dimensions
- Webbing Jackstays Guidance
- Webbing Jackstays - Custom Build Instructions
- Danbuoy Selection Guide
- Danbuoy Instructions - 3 piece Telescopic - Offshore
- Liferaft Selection Guide
- Liferaft Servicing
- Man Overboard Equipment - World Sailing Compliance
- Marine Safety Information Links
- Safety Marine Equipment List for UK Pleasure Vessels
Sailing Clothing
- Sailing Jackets
- Sailing Trousers
- Thermal Layers
Leisure Wear
- Accessories
- Rain Jackets
- Sweatshirts
Sailing Footwear
- Dinghy Boots and Shoes
- Sailing Wellies
Leisure Footwear
- Walking Shoes
Sailing Accessories
- Sailing Bags and Holdalls
- Sailing Gloves
- Sailing Kneepads
Clothing Clearance
Clothing guide.
- What to wear Sailing
- Helly Hansen Mens Jacket and Pant Size Guide
- Helly Hansen Womens Sailing Jacket and Pant Size Guide
- Lazy Jacks Mens and Womens Size Charts
- Musto Men's and Women's Size Charts
- Old Guys Rule Size Guide
- Sailing Gloves Size Guides
- Weird Fish Clothing Size Charts
The Jimmy Green Clothing Store
Lower Fore St, Beer, East Devon, EX12 3EG
- Adria Bandiere
- Anchor Marine
- Anchor Right
- August Race
- Barton Marine
- Blue Performance
- Brierley Lifting
- Brook International
- Brookes & Adams
- Captain Currey
- Chaineries Limousines
- Coastline Technology
- Colligo Marine
- Cyclops Marine
- Douglas Marine
- Ecoworks Marine
- Exposure OLAS
- Fire Safety Stick
- Fortress Marine Anchors
- Hawk Marine Products
- Helly Hansen
- International
- Jimmy Green Marine
- Maillon Rapide
- Mantus Marine
- Marling Leek
- Meridian Zero
- MF Catenificio
- Ocean Fenders
- Ocean Safety
- Old Guys Rule
- Petersen Stainless
- Polyform Norway
- PSP Marine Tape
- Sidermarine
- Stewart Manufacturing Inc
- Team McLube
- Technical Marine Supplies
- Titan Marine (CMP)
- Ultramarine
- Waterline Design
- William Hackett
Clearance August Race Boat Cleaning Kit £26.00
Clearance LIROS Racer Dyneema £55.08
Clearance Folding Stock Anchor £123.25
Clearance LIROS Herkules £0.00
Clearance Barton Size 0 Ball Bearing Blocks - 5mm £10.13
Clearance Marlow Blue Ocean® Doublebraid £18.48
Mooring Clearance
Anchoring clearance, standing rigging clearance, running rigging clearance, deck hardware clearance, chandlery clearance, safety clearance, yacht and boat fenders.
Jimmy Green Marine stock an extensive range of yacht and boat fenders from Majoni, Polyform Norway and Plastimo.
Boat fenders offer essential protection for yachts or anything afloat, when they come in to contact with harbour walls, pontoons, pilings and other yachts.
Dock fenders, also known as bumpers, are permanently fitted to the pontoon or dock in areas of frequent use e.g. the pontoon in your allotted marina berth.
Boat fenders are relatively inexpensive compared with gelcoat or even structural yacht repairs so it makes sense to have an adequate quantity of the correct size and configuration onboard.
Boat fenders come in several different shapes and a multitude of different sizes to safeguard the topsides, the bow or stem and the stern of any design of watercraft.
Calculate the optimum number of fenders according to their shape and size in preparation for your typical mooring conditions, whether in your home berth or visiting other ports or marinas. Then add some extra for use in severe conditions. Bear in mind that although more fenders are always going to be useful, they will all need to be stowed onboard securely.
Jimmy Green Marine offer two main types of boat fender which cover most mooring situations:
Cylindrical fenders with a rope eye at both ends can be hung vertically when mooring against predominantly flat harbour walls, docks and pontoons or horizontally against pilings and other awkward protrusions.
Round or pear shaped fenders with one rope eye are very similar to mooring buoys and can be hung vertically for heavy load points and where extra diameter is required to allow for a yacht’s fore and aft curve. They are also usefully deployed to protect the stern platform when mooring stern to.
Other types include bow fenders
Plus through hole fenders, transom corner fenders, specialist flat narrow boat fenders and large inflatable fenders for larger yachts.
Take these factors into account when selecting the appropriate size for your fenders: Yacht Length Overall, Yacht Displacement (weight) and the anticipated mooring conditions
There is an old fashioned rule of thumb that will give you a starting point before making a final decision based on these three main factors.
Rule of Thumb 1 = 1 inch fender diameter or 2 inch round fender diameter for every 4 or 5 feet of yacht length overall.
The rule has been interpreted and converted approximately into modern metric equivalents in the table:
Fender Frequency Guide
How to set up your fenders.
There is another old rule of thumb for judging how many boat fenders does a boat need – 1 fender per 10 feet of Low Waterline Length (LWL) with a minimum of 3 for boats of 20 feet or less. The rule has been developed into a modern metric measure equivalent.
Fenders need to be deployed in a proper fashion paying due care and attention to the spacing and height of the fenders and an assessment of how many of the total should be round rather than cylindrical fenders.
Deploy at least one fender amidships (maximum beam) with the remainder spaced appropriately fore and aft from the centre outward.
When mooring alongside another yacht (rafting up) an extra fender or two amidships will be required for adequate protection. An extra round fender deployed fore and aft will help to take up the increased gap between the topsides.
Hang fenders so that they are always just clear of the water or higher where required because of the pontoon height. Secure the fender lanyards to strong, deck level anchorage points. Avoid using lifelines or guard wires if possible because they are not designed to withstand the potential stresses and strains. A lower attachment point maintains the fender in position better by lessening the arc or swing.
Cleaning Fenders
Keep your fenders clean and free from harmful grit by washing with soap and water. Harsh cleaning agents are not advisable as they will harm the surface of the fender.
Fender covers are washable and help to keep your fenders clean and grit free as well as protecting them from the elements.
Fender Size
- Buoy 1 (35 x 48cm) (3) Buoy 2 (45 x 62cm) (3) Buoy 3 (55 x 73cm) (3) Star 1 (12 x 45cm) (3) Star 2 (15 x 58cm) (3) Star 3 (21 x 62cm) (3) Star 4 (24 x 70cm) (3) Star 5 (30 x 90cm) (4) F01L (2) F1 (2) F02 (2) F2 (3) F3 (2) F4 (3) F5 (2) F6 (2) F7 (2) F8 (2) F11 (2) F13 (2) A1 (2) A2 (2) A3 (2) A4 (2) A5 (2) A6 (2) A7 (2) Polyform G3 (14.4 x 51.5cm) (1) Polyform G4 (10.7 x 58.5 cm) (1) 3/4 Round Dock (1) Articulated Dock (2) Small Dock (1) Dock Fender Set (1) Large Dock (1) 5 x 43 cm (1) 20 x 50 cm (1) 25 x 70 cm (1) 28 x 85 cm (2) 32 x 104 cm (2) 42 x 132 cm (2) 60 x 150 cm (2) 145 x 42 cm (1) 175 x 65 cm (1) 210 x 97 cm (1) 170 x 110 cm (1) 235 x 900 cm (1)
- Anthracite (2) Black (17) Classic (2) Grey (2) Navy (17) White (12) White with Blue Ends (8)
- Castro (1) Clamcleat (1) Fendequip (3) Jimmy Green Marine (3) LIROS Ropes (3) Majoni (11) Meridian Zero (1) Ocean Fenders (3) Plastimo (3) Polyform Norway (5)
Rope Diameter
- 8mm (4) 10mm (3) 12mm (3)
Purchase Type
- Custom Build (3)
Clearance Polyform Green Concept G Series Fenders
£20.00 -40%
Majoni Star Fenders
Majoni buoy fenders, polyform heavy duty f series fenders, polyform heavy duty buoy fenders, majoni bow and stem fender, majoni flat narrow boat fenders, majoni slim narrow boat fenders, majoni dock fenders, plastimo dock fenders, ocean easystore plus fenders, ocean magnus mega yacht fenders.
- Sports & Outdoors
- Boating & Sailing
- Docking & Anchoring Equipment
- Boat Fenders
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime Try Prime and start saving today with fast, free delivery
Amazon Prime includes:
Fast, FREE Delivery is available to Prime members. To join, select "Try Amazon Prime and start saving today with Fast, FREE Delivery" below the Add to Cart button.
- Cardmembers earn 5% Back at Amazon.com with a Prime Credit Card.
- Unlimited Free Two-Day Delivery
- Streaming of thousands of movies and TV shows with limited ads on Prime Video.
- A Kindle book to borrow for free each month - with no due dates
- Listen to over 2 million songs and hundreds of playlists
- Unlimited photo storage with anywhere access
Important: Your credit card will NOT be charged when you start your free trial or if you cancel during the trial period. If you're happy with Amazon Prime, do nothing. At the end of the free trial, your membership will automatically upgrade to a monthly membership.
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
- Go to your orders and start the return
- Select the return method
Image Unavailable
- To view this video download Flash Player
Heavy-Duty Inflatable Fenders for Boats Yachts Sailboats Docks
Purchase options and add-ons
- [COMPLETE ADAPTABILITY] - Our air pump comes equipped with a range of valve adapters, ensuring compatibility with various fender types; You'll have everything you need to ensure a seamless and hassle-free inflation process
- ELITE Fenders offers versatile defense for boat-to-dock situations, rafting, and impact protection; Designed in the USA, our products are the ideal choice for boats of all sizes, ensuring reliable safeguarding while requiring minimal storage space
- SUITABLE for inflatable fenders; Valves adaptors included
Additional Details
Frequently bought together
Top rated similar items
Product Description
Product information
Technical details, additional information, videos for this product.
Click to play video
High Quailty Inflatable PVC Fenders by ELITE Fenders
ELITE Fenders
Looking for specific info?
Customer reviews.
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Reviews with images
- Sort reviews by Top reviews Most recent Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. please try again later..
- Amazon Newsletter
- About Amazon
- Accessibility
- Sustainability
- Press Center
- Investor Relations
- Amazon Devices
- Amazon Science
- Start Selling with Amazon
- Sell apps on Amazon
- Supply to Amazon
- Protect & Build Your Brand
- Become an Affiliate
- Become a Delivery Driver
- Start a Package Delivery Business
- Advertise Your Products
- Self-Publish with Us
- Host an Amazon Hub
- › See More Ways to Make Money
- Amazon Visa
- Amazon Store Card
- Amazon Secured Card
- Amazon Business Card
- Shop with Points
- Credit Card Marketplace
- Reload Your Balance
- Amazon Currency Converter
- Your Account
- Your Orders
- Shipping Rates & Policies
- Amazon Prime
- Returns & Replacements
- Manage Your Content and Devices
- Recalls and Product Safety Alerts
- Conditions of Use
- Privacy Notice
- Your Ads Privacy Choices
IMAGES
COMMENTS
Fenders. Yachtfend aims to protects your yacht. With 18 different sizes, our fenders cover yachts from 30-300 feet. SHOP NOW . 25% off . FREE SHIPPING. Fenders; Fender Covers. Regular sizes in stock. Larger sizes from 32 " and above: custom made. Protect fenders and Improve appearance.
Polyform G series boat fenders. Available in six sizes to accommodate boats from sub-10 feet to up to 40 feet in length, the Polyform G Series is a high quality, good looking product boasting an even wall thickness for strength and durability. Moulded-in ribs add to the strength while also providing protection against abrasion.
We listen, we visualize, we create. Even now we are redefining inflatable fenders with tougher, stronger new-gen materials and welded seams. We do it all in-house for ultimate control and no-compromise extreme quality. Integrity is our commitment, our gear performance is guaranteed. By the way, our gear also adds an elegant look to compliment ...
Suitable for boats, yachts, sailboats, rowboats, and docks, this fender kit from VIVOHOME comes with four boat fenders—available in the 6.5 x 24 in., and 8.5 x 27 in. sizes—four 5.2' ropes, four inflating needles, as well as a hand pump to inflate your bumpers.
V-shaped Freedom Fenders with a self-centering shape will stay on a piling regardless of boat movement. They're sized for everything from small boats to mega yachts. Pontoon fenders, such as the Fence Saver II, Pontoon Curve Protector and Pontoon Protector 90, are available in specialized shapes. They protect the delicate aluminum fencing and ...
Discover the best boat fenders for your watercraft. Learn about various types, how to choose the right fenders, and proper installation techniques. Expert advice for optimal boat protection. +49 211 54 69 22 23. 0. ... Yes, boat fenders are suitable for yachts as well. However, consider the size and weight of the yacht when selecting the ...
Cylindrical fenders are ideal for yachts as they roll against the hull with changing tides or waves. Still, there are other choices like spherical or flat fenders that may fit certain docking situations better. Yacht fenders have come a long way. From tires and canvas sacks filled with straw or hay - to modern, specifically designed fenders.
Even if you would using boat fenders the first time, these fenders would ensure you a positive experience on the water and a great level of protection to your boat. Pros. Act as a safeguard against hard surfaces and intense collisions, Best for use with boats, sailboats, yachts, row boats, Made of marine-grade PVC that is resistant to UV rays. Cons
Heavy Duty Ball Fender Navy. £ 27.69 £ 19.95. Anchor Marine Single Eye Chubby Fenders. £ 14.95 - £ 34.95. 1. 2. Buy the best marine fenders, yacht fenders and fender covers from Marine Super Store. Order yours and get free UK delivery when you spend over £100.
Polyform US. Polyform boat fenders and buoys are manufactured in the USA and recognized in ports and marinas across the world. Known for our signature blue rope-holds and trusted, durable designs, we set the standard for quality buoys and boat fenders. Discover what makes us Uniquely Polyform.
Large Yacht Fenders. Fendequip large Yacht Fenders are most suited to Superyachts and Megayachts who require increased protection for all mooring conditions. Despite their size, they are manufactured in exactly the same way as our standard maxiStow range and offer all of the benefits, at a much larger scale.
Yacht fenders are widely used in large ships, yachts, offshore platforms and ports, and can be fully adapted to ships. It uses compressed air as a buffer medium to absorb ship collision energy. Therefore, compared with the general compression rubber fender, it has the advantages of high energy absorption, small reaction force, and large contact area with the ship.
Yachts: spherical fenders and inflatable fenders: cylinder fenders, v-shaped fenders, transom fenders: Many boats, especially larger ones are best protected by multiple different types of fenders on the boat and on the dock. For example, Yachts can be protected by cylinder fenders and/or spherical fenders, but it's always a good idea to also ...
Yachtfenders the ultimate choice yachts sail & power protect yachts to avoid costly repairs and down time of use bigger is better ultra light, stow away, heavy duty pvc construction hot welded seems can be used vertical or horizontal yachts 30 -300 feet 5 year warranty ... Fender size chart: Size 12″ 30×60 cm: Yachts 30-50 feet: Size 14 ...
Our Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best selling competitive brand. Five-year limited warranty. Quick Facts. Webbing exceeds 4500 lbs. tensile strength.
FENDERTEX® offers fenders for mega and Giga yachts for the protection of hulls during berthing. Studied, designed and made to measure to meet the requirements of berthing, handling, storage and aesthetics, the mega-yachts and giga-yachts' textile fenders provide the crew with a greater comfort of use and increased security.
Unveiling the finest boat fenders as we highlight top picks to protect your vessel with unmatched efficiency and style. The Best Boat Fenders are Polyform US G-Series for versatility, Taylor Made Super Gard for durability, Mission Sentry for innovative design, Dan-Fender for heavy-duty use, Aere Docking for easy storage, Majoni Star for budget-friendliness, and Taylor Made's Big B for all ...
AERÉ Docking Solutions is the leading name in the marine industry. Browse our inflatable boat fenders, yacht fenders, boat bumpers, fender covers, and more.
Fender Covers Covers to fit AERE Fenders $ 316.00 - $ 795.00. Select options. Fender Covers Covers to fit DOCK BUDDY $ 186.00 - $ 354.00. Select options. Fender Covers Covers to fit TAYLOR MADE fenders $ 68.00 - $ 112.00. Select options. Fender Covers Covers to fit POLYFORM Ball & HTM Fenders
For use with boat fenders lines up to 5/8″ diameter. Pipe Rail Boat Fender Hooks are offered in 3 sizes for handrail diameters of 1-0", 1-1/4", and 1-1/2". Removable Fluffy Chafe Gear. Fluffy Acrylic Removable Chafe - Offered in the following solid colors of Black, Navy Blue Purple, \ Light Grey, and Dark Grey and in the standard ...
Designed and manufactured in Europe, DEFENDA inflatable superyacht fenders are incredibly strong, yet lightweight and easily stored when deflated. Made with the most advanced materials, fittings and processes, our cylindrical, ball and new low profile flat fenders are available in many standard sizes. Each type of DEFENDA provides a heavy duty ...
Jimmy Green Marine stock an extensive range of yacht and boat fenders from Majoni, Polyform Norway and Plastimo. Boat fenders offer essential protection for yachts or anything afloat, when they come in to contact with harbour walls, pontoons, pilings and other yachts. Dock fenders, also known as bumpers, are permanently fitted to the pontoon or ...
This item: Elite Fenders: Heavy-Duty Inflatable Fenders for Boats Yachts Sailboats Docks. $4499. +. Fender Lines 4 Pack 3/8 Inch x 10 ft Premium Boat Fender Lines with 5" Eyelet, Double Braid Nylon Boat Bumper Rope/Boat Fender Rope, Dock Lines Boat Ropes for Docking Boat Lines Dock Ties,J-FM TWNTHSD. $2695 ($0.67/Foot)